{"title":"RFdesign Long Range Telemetry \u0026 Radio Modems","description":"\u003cp\u003eExplore the full range of \u003cstrong\u003eRFdesign\u003c\/strong\u003e long range telemetry modems, radio modules, and accessories — trusted by professional drone operators and UAV engineers worldwide.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLong Range Telemetry Modems\u003c\/strong\u003e – RFD868x, RFD868ux, RFD900x and EU-certified variants for reliable UAV data links\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTXMOD RC Transmitter Modules\u003c\/strong\u003e – Drop-in JR-bay modules for long range RC control\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCables \u0026amp; Accessories\u003c\/strong\u003e – Pixhawk-compatible telemetry cables and multi-cable harnesses\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBundles\u003c\/strong\u003e – Pre-configured modem bundles for quick deployment\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eRFdesign modems are engineered in Australia and are widely used in commercial UAV, mapping, and research applications. \u003cspan\u003e\u003cstrong\u003eNDAA compliant\u003c\/strong\u003e and compatible \u003c\/span\u003ewith ArduPilot, PX4, and Mission Planner.\u003c\/p\u003e","products":[{"product_id":"rfd-868x-eu-v2-long-range-telemetry-modem-sl2","title":"RFD 868x EU V2 Long Range Telemetry Modem","description":"\u003ch2\u003e\n RFD868x-EU New Features:\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  New Processor, ARM 32 bit core.\n \u003c\/li\u003e\n \u003cli\u003e\n  Air data rate: 200kbit\/s.\n \u003c\/li\u003e\n \u003cli\u003e\n  AES Hardware accelerated encryption. *Fully working*\n \u003c\/li\u003e\n \u003cli\u003e\n  RC PPM Passthrough with telemetry at the same time.\n \u003c\/li\u003e\n \u003cli\u003e\n  Fully ESD protected + filtered - Every IO port is protected and filtered.\n \u003c\/li\u003e\n \u003cli\u003e\n  Original SiK point to point firmware implemented.\n \u003c\/li\u003e\n \u003cli\u003e\n  Note: Currently due to the bandwidth limitations of the 868 modems Asynchronous Mesh and Multipoint Firmware are not officially supported for the 868X modems and correct operation of this code cannot be guaranteed\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n Features:\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Long range \u0026gt;20km depending on antennas and GCS.\n \u003c\/li\u003e\n \u003cli\u003e\n  2 x RP-SMA RF connectors, diversity switched.\n \u003c\/li\u003e\n \u003cli\u003e\n  500mW (+27dBM) See specifications.\n \u003c\/li\u003e\n \u003cli\u003e\n  Transmit low pass filter.\n \u003c\/li\u003e\n \u003cli\u003e\n  \u0026gt; 20dB Low noise amplifier, high IP3.\n \u003c\/li\u003e\n \u003cli\u003e\n  RX SAW filter.\n \u003c\/li\u003e\n \u003cli\u003e\n  All I\/O ESD protected and filtered.\n \u003c\/li\u003e\n \u003cli\u003e\n  Re implemented SiK and firmware, field upgrade-able, easy to configure.\n \u003c\/li\u003e\n \u003cli\u003e\n  Small, light weight.\n \u003c\/li\u003e\n \u003cli\u003e\n  Note: Not compatible with older modems\n \u003c\/li\u003e\n \u003cli style=\"text-align: left;\"\u003e\n  The standard RFD868x will not communicate with the RFD868x-EU modem unless the standard RFD868x is configured to the same frequency as the EU modem.\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n Interfaces:\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  RF : 2 x RP-SMA connectors\n \u003c\/li\u003e\n \u003cli\u003e\n  Serial: Logic level TTL (+3.3v)\n \u003c\/li\u003e\n \u003cli\u003e\n  Power: +5v, ~800mA max peak (at maximum transmit power)\n \u003c\/li\u003e\n \u003cli\u003e\n  GPIO: 6 General purpose IO (Digital capable).\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n Specifications:\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Frequency Range:  868-869 MHz\n \u003c\/li\u003e\n \u003cli\u003e\n  Output Power: 500mW (+27dBm), controllable in 1dB steps ( +\/- 1dB @=20dBm typical)\n \u003c\/li\u003e\n \u003cli\u003e\n  Air Data transfer rates: 12, 56, 100, 200 kbit\/sec (User settable,  200 kbit default)*\n \u003c\/li\u003e\n \u003cli\u003e\n  UART data transfer rates: 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400, 460800, 1M baud (User settable, 57600 default)*\n  \u003cbr\u003e\n  *note these values are correct as of version 3.07 SiK firmware\n \u003c\/li\u003e\n \u003cli\u003e\n  Output Power: 500mW (+27dBm)\n \u003c\/li\u003e\n \u003cli\u003e\n  Receive Sensitivity: \u0026gt;111 dBm at 12 kbps, 105 at 64 kbps and 98 at 200 kbps\n \u003c\/li\u003e\n \u003cli\u003e\n  Size: 30 mm (wide) x 57 mm (long) x 12.8 mm (thick) - Including RF Shield, Heatsink and connector extremeties\n \u003c\/li\u003e\n \u003cli\u003e\n  Weight: 14.5g\n \u003c\/li\u003e\n \u003cli\u003e\n  Mounting: 3 x M2.5 screws, 3 x header pin solder points\n \u003c\/li\u003e\n \u003cli\u003e\n  Power Supply: +5 V nominal, (+3.5 V min, +5.5 V max), ~800 mA peak at maximum power\n \u003c\/li\u003e\n \u003cli\u003e\n  Temp. Range: -40 to +85 deg C, tested operational from -73 to +123 deg C.\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n Software \/ GCS Support:\n\u003c\/h2\u003e\n\u003cp\u003e\n The software solution is an open source development called \"SiK\".  It has been re implemented to suit the new processor architecture available on the 32bit ARM processor core.  A boot loader and interface is available for further development and field upgrade of the modem firmware via the serial port.\n\u003c\/p\u003e\n\u003cp\u003e\n Most parameters are configurable via AT commands, Eg. baud rate (air\/uart), frequency band, power levels.\n\u003c\/p\u003e\n\u003cp\u003e\n Integrated support for configuring the RFD radios is supported by APM Planner.\n\u003c\/p\u003e\n\u003cp\u003e\n The default settings are at 57600 baud, N, 8, 1, and 200k air data rate.\n\u003c\/p\u003e\n\u003cp\u003e\n The RFD868\/900x manual is here:\n \u003ca href=\"http:\/\/files.rfdesign.com.au\/Files\/documents\/RFD900x%20DataSheet.pdf\"\u003e\n  RFD900x Manual\n \u003c\/a\u003e\n\u003c\/p\u003e\n\u003cp\u003e\n The RFD868\/900x SiK software manual is here :\n \u003ca href=\"http:\/\/files.rfdesign.com.au\/Files\/documents\/RFD900x%20Peer-to-peer%20V3.X%20User%20Manual%20V1.2.pdf\"\u003e\n  RFD900x Peer-to-peer Manual\n \u003c\/a\u003e\n\u003c\/p\u003e\n\u003cp\u003e\n \u003cstrong\u003e\n  Software features include:\n \u003c\/strong\u003e\n\u003c\/p\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Frequency hopping spread spectrum (FHSS)\n \u003c\/li\u003e\n \u003cli\u003e\n  Transparent serial link\n \u003c\/li\u003e\n \u003cli\u003e\n  Point to Point\n \u003c\/li\u003e\n \u003cli\u003e\n  Configuration by simple AT commands for local radio, RT commands for remote radio\n \u003c\/li\u003e\n \u003cli\u003e\n  User configurable serial data rates and air datarates\n \u003c\/li\u003e\n \u003cli\u003e\n  Error correction routines, Mavlink protocol framing (user selectable)\n \u003c\/li\u003e\n \u003cli\u003e\n  Mavlink radio status reporting (Local RSSI, Remote RSSI, Local Noise, Remote Noise)\n \u003c\/li\u003e\n \u003cli\u003e\n  Automatic antenna diversity switching on a packet basis in realtime\n \u003c\/li\u003e\n \u003cli\u003e\n  Automatic duty cycle throttling based on radio temperature to avoid overheating\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n Compliance:\n\u003c\/h2\u003e\n\u003cp align=\"center\" style=\"text-align: left;\"\u003e\n RFdesign declare that the equipment is in conformity with the relevant Union harmonisation legislation:\n\u003c\/p\u003e\n\u003cp align=\"center\" style=\"text-align: left;\"\u003e\n Directive 2014\/53\/EU on radio equipment\n\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e\n The RFD868x-EU is compliant with the following standards:\n\u003c\/p\u003e\n\u003cul\u003e\n \u003cli style=\"text-align: left;\"\u003e\n  EN 301 489-3 V2.1.1\n \u003c\/li\u003e\n \u003cli style=\"text-align: left;\"\u003e\n  EN 300 220-2 V3.1.1\n \u003c\/li\u003e\n \u003cli style=\"text-align: left;\"\u003e\n  EN 62311:2008\n \u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"RFdesign","offers":[{"title":"Default Title","offer_id":56578185396605,"sku":"MODEM-RFD868X-EU","price":97.53,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/868x-eu_final__14611.webp?v=1753830799"},{"product_id":"rf-design-rfd-868x-eu-long-range-telemetry-modem-bundle","title":"RF Design RFD 868x-EU Long Range Telemetry Modem Bundle","description":"\u003cp\u003e\n This is the ideal solution for long range telemetry or communications. 2 x RFD868x-EU modems with antennas for all antenna ports.\n\u003c\/p\u003e\n\u003cp\u003e\n The kit consists of:\n\u003c\/p\u003e\n\u003cul\u003e\n \u003cli\u003e\n  2 x RFD868x-EU Radio Modems\n \u003c\/li\u003e\n \u003cli\u003e\n  1 x Antenna, 868-900MHz Quarter wave monopole 2.1dBi\n \u003c\/li\u003e\n \u003cli\u003e\n  1 x Antenna, 868-900MHz Right Angle Quarter wave monopole 2.1dBi\n \u003c\/li\u003e\n \u003cli\u003e\n  4 x Antennas, 868-900MHz Half wave dipole 3dBi\n \u003c\/li\u003e\n \u003cli\u003e\n  1 x FTDI USB cable\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n You get a cheaper price when purchasing a whole kit !\n\u003c\/p\u003e\n\u003ch2\u003e\n RFD868x New Features\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  New Processor, ARM 32 bit core.\n \u003c\/li\u003e\n \u003cli\u003e\n  Air data rate: 500kbit\/s.\n \u003c\/li\u003e\n \u003cli\u003e\n  AES Hardware accelerated encryption. *Fully working*\n \u003c\/li\u003e\n \u003cli\u003e\n  RC PPM Passthrough with telemetry at the same time.\n \u003c\/li\u003e\n \u003cli\u003e\n  Fully ESD protected + filtered - Every IO port is protected and filtered.\n \u003c\/li\u003e\n \u003cli\u003e\n  Original SiK point to point, multipoint firmware implemented.\n \u003c\/li\u003e\n \u003cli\u003e\n  Asynchronous multipoint firmware, *Beta release*\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n Key Features\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Long range \u0026gt;40km depending on antennas and GCS setup *80km demonstrated by Edge Research labs on a balloon !, 57km in India, on Dipoles.\n \u003c\/li\u003e\n \u003cli\u003e\n  2 x RP-SMA RF connectors, diversity switched.\n \u003c\/li\u003e\n \u003cli\u003e\n  1 Watt (+30dBm) transmit power.\n \u003c\/li\u003e\n \u003cli\u003e\n  Transmit low pass filter.\n \u003c\/li\u003e\n \u003cli\u003e\n  \u0026gt; 20dB Low noise amplifier, high IP3.\n \u003c\/li\u003e\n \u003cli\u003e\n  RX SAW filter.\n \u003c\/li\u003e\n \u003cli\u003e\n  All I\/O ESD protected and filtered.\n \u003c\/li\u003e\n \u003cli\u003e\n  Re implemented SiK and Multipoint SiK firmware, field upgradeable, easy to configure.\n \u003c\/li\u003e\n \u003cli\u003e\n  Small, light weight.\n \u003c\/li\u003e\n \u003cli\u003e\n  Compatible with 3DR \/ Hope-RF radio modules.\n \u003c\/li\u003e\n \u003cli\u003e\n  License free use in Australia, Canada, USA, NZ, Europe\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n Kit Contents\n\u003c\/h2\u003e\n\u003cp\u003e\n The kit consists of:\n\u003c\/p\u003e\n\u003cul\u003e\n \u003cli\u003e\n  2 x RFD868x-EU Radio Modems\n \u003c\/li\u003e\n \u003cli\u003e\n  1 x Antenna, 868-900MHz Quarter wave monopole 2.1dBi\n \u003c\/li\u003e\n \u003cli\u003e\n  1 x Antenna, 868-900MHz Right Angle Quarter wave monopole 2.1dBi\n \u003c\/li\u003e\n \u003cli\u003e\n  4 x Antennas, 868-900MHz Half wave dipole 3dBi\n \u003c\/li\u003e\n \u003cli\u003e\n  1 x FTDI USB cable\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n Interfaces\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  RF : 2 x RP-SMA connectors\n \u003c\/li\u003e\n \u003cli\u003e\n  Serial: Logic level TTL (+3.3v)\n \u003c\/li\u003e\n \u003cli\u003e\n  Power: +5v, ~800mA max peak (at maximum transmit power)\n \u003c\/li\u003e\n \u003cli\u003e\n  GPIO: 6 General purpose IO (Digital, ADC, PWM capable).\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n Specifications\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Frequency Range:  868-869 MHz\n \u003c\/li\u003e\n \u003cli\u003e\n  Output Power: 1W (+30dBm), controllable in 1dB steps ( +\/- 1dB @=20dBm typical )\n \u003c\/li\u003e\n \u003cli\u003e\n  Air Data transfer rates: 4, 8, 16, 19, 24, 32, 48, 64, 96, 128, 192 and 250, 500 kbit\/sec ( User selectable, 64k default )\n \u003c\/li\u003e\n \u003cli\u003e\n  UART data transfer rates: 9600, 19200, 38400, 57600, 115200, 400k, 921k baud  ( User selectable, 57600 default )\n \u003c\/li\u003e\n \u003cli\u003e\n  Output Power: 1W (+30dBm)\n \u003c\/li\u003e\n \u003cli\u003e\n  Receive Sensitivity: \u0026gt;121 dBm at low data rates, high data rates (TBA)\n \u003c\/li\u003e\n \u003cli\u003e\n  Size: 30 mm (wide) x 57 mm (long) x 12.8 mm (thick) - Including RF Shield, Heatsink and connector extremeties\n \u003c\/li\u003e\n \u003cli\u003e\n  Weight: 14.5g\n \u003c\/li\u003e\n \u003cli\u003e\n  Mounting: 3 x M2.5 screws, 3 x header pin solder points\n \u003c\/li\u003e\n \u003cli\u003e\n  Power Supply: +5 V nominal, (+3.5 V min, +5.5 V max), ~800 mA peak at maximum power\n \u003c\/li\u003e\n \u003cli\u003e\n  Temp. Range: -40 to +85 deg C, tested operational from -73 to +123 deg C.\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n Software \/ GCS Support\n\u003c\/h2\u003e\n\u003cp\u003e\n The software solution is an open source development called \"SiK\".  It has been re implemented to suit the new processor architecture available on the 32bit ARM processor core.  A boot loader and interface is available for further development and field upgrade of the modem firmware via the serial port.\n\u003c\/p\u003e\n\u003cp\u003e\n Most parameters are configurable via AT commands, Eg. baud rate (air\/uart), frequency band, power levels.\n\u003c\/p\u003e\n\u003cp\u003e\n Integrated support for configuring the RFD900 radios is supported by APM Planner.\n\u003c\/p\u003e\n\u003cp\u003e\n The default settings are at 57600 baud, N, 8, 1, and 64k air data rate.\n\u003c\/p\u003e\n\u003cp\u003e\n The RFD868\/900x manual is here:\n \u003ca href=\"http:\/\/files.rfdesign.com.au\/Files\/documents\/RFD900x%20DataSheet.pdf\"\u003e\n  RFD900x Manual\n \u003c\/a\u003e\n\u003c\/p\u003e\n\u003cp\u003e\n The RFD868\/900x SiK software manual is here :\n \u003ca href=\"http:\/\/files.rfdesign.com.au\/Files\/documents\/RFD900x%20Peer-to-peer%20User%20Manual.pdf\"\u003e\n  RFD900x Peer-to-peer Manual\n \u003c\/a\u003e\n\u003c\/p\u003e\n\u003ch3\u003e\n Software features include:\n\u003c\/h3\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Frequency hopping spread spectrum (FHSS)\n \u003c\/li\u003e\n \u003cli\u003e\n  Transparent serial link\n \u003c\/li\u003e\n \u003cli\u003e\n  Point to Point, or Multipoint networking\n \u003c\/li\u003e\n \u003cli\u003e\n  Configuration by simple AT commands for local radio, RT commands for remote radio\n \u003c\/li\u003e\n \u003cli\u003e\n  User configurable serial data rates and air datarates\n \u003c\/li\u003e\n \u003cli\u003e\n  Error correction routines, Mavlink protocol framing (user selectable)\n \u003c\/li\u003e\n \u003cli\u003e\n  Mavlink radio status reporting (Local RSSI, Remote RSSI, Local Noise, Remote Noise)\n \u003c\/li\u003e\n \u003cli\u003e\n  Automatic antenna diversity switching on a packet basis in realtime\n \u003c\/li\u003e\n \u003cli\u003e\n  Automatic duty cycle throttling based on radio temperature to avoid overheating\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\n Compliance\n\u003c\/h3\u003e\n\u003cp\u003e\n The RFD868 is designed to be compliant with the following standards:\n\u003c\/p\u003e\n\u003cul\u003e\n \u003cli\u003e\n  FCC Part 15.247 (Frequency hopping and digitally modulated intentional radiators)\n \u003c\/li\u003e\n \u003cli\u003e\n  AS\/NZS 4268:2012 (Radio equipment and systems - short range devices)\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n The modem is designed for system integrators who will integrate the modem into their own projects and product prototypes.  The user is responsible for compliance with local regulations for radio transmitters.\n\u003c\/p\u003e\n","brand":"RFdesign","offers":[{"title":"Default Title","offer_id":56578186314109,"sku":"RFD868X-EU","price":196.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/868x_final_bundle2___99840.jpg?v=1753830813"},{"product_id":"rf-design-rfd-868ux-eu-long-range-telemetry-modem-bundle","title":"RF Design RFD 868ux-EU Long Range Telemetry Modem Bundle","description":"\u003cp\u003e\n This is the ideal solution for long range telemetry or communications.\n\u003c\/p\u003e\n\u003cp\u003e\n Two RFD868ux-EU modems with antennas for all antenna ports.\n\u003c\/p\u003e\n\u003cp\u003e\n The kit consists of:\n\u003c\/p\u003e\n\u003cul\u003e\n \u003cli\u003e\n  2 x RFD868ux-EU Radio Modems\n \u003c\/li\u003e\n \u003cli\u003e\n  1 x Antenna, 900MHz Quarter wave monopole 2.1dBi\n \u003c\/li\u003e\n \u003cli\u003e\n  1 x Antenna, 900MHz Right Angle Quarter wave monopole 2.1dBi\n \u003c\/li\u003e\n \u003cli\u003e\n  4 x Antennas, 900MHz Half wave dipole 3dBi\n \u003c\/li\u003e\n \u003cli\u003e\n  1 x FTDI USB cable\n \u003c\/li\u003e\n \u003cli\u003e\n  4 x RFD900u antenna cable (RPSMA)\n \u003c\/li\u003e\n \u003cli\u003e\n  1 x 900ux to 8 way socket cable (900ux) also suitable for 868ux\n \u003c\/li\u003e\n \u003cli\u003e\n  1 x PIXH2 to RFD900ux Telemetry Cable 150 mm - also suitable for 868ux\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n RFD868ux EU:\n\u003c\/h2\u003e\n\u003cp\u003e\n This is the RFD868ux EU on a double sided mini carrier board.  It comes with a mini JST connector and 2x u.Fl RF connectors and heat sink.\n\u003c\/p\u003e\n\u003ch2\u003e\n RFD868ux EU New Features:\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Fully compatible with RFD868x modems.\n \u003c\/li\u003e\n \u003cli\u003e\n  Air data rate up to: 500kbit\/s.\n \u003c\/li\u003e\n \u003cli\u003e\n  AES Hardware accelerated encryption.\n \u003c\/li\u003e\n \u003cli\u003e\n  RC PPM Passthrough with telemetry at the same time.\n \u003c\/li\u003e\n \u003cli\u003e\n  SiK point to point firmware.\n \u003c\/li\u003e\n \u003cli\u003e\n  Note: Currently due to the bandwidth limitations of the 868 modems Asynchronous Mesh and Multipoint Firmware are not officially supported for the 868X modems and correct operation of this code cannot be guaranteed\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n Features:\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Long range \u0026gt;40km depending on antennas and GCS setup\n \u003c\/li\u003e\n \u003cli\u003e\n  2 x u.FL RF connectors, diversity switched.\n \u003c\/li\u003e\n \u003cli\u003e\n  1 Watt (+30dBm) transmit power.\n \u003c\/li\u003e\n \u003cli\u003e\n  Transmit low pass filter.\n \u003c\/li\u003e\n \u003cli\u003e\n  \u0026gt; 15dB Low noise amplifier, high IP3.\n \u003c\/li\u003e\n \u003cli\u003e\n  RX SAW filter.\n \u003c\/li\u003e\n \u003cli\u003e\n  All I\/O ESD protected and filtered.\n \u003c\/li\u003e\n \u003cli\u003e\n  Re implemented SiK firmware, field upgradable, easy to configure.\n \u003c\/li\u003e\n \u003cli\u003e\n  Small, light weight.\n \u003c\/li\u003e\n \u003cli\u003e\n  License free use in Europe, India\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n Interfaces:\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  RF : 2x u.FL RF connectors\n \u003c\/li\u003e\n \u003cli\u003e\n  Serial: Logic level TTL (+3.3v)\n \u003c\/li\u003e\n \u003cli\u003e\n  Power: +5v, ~800mA max peak (at maximum transmit power)\n \u003c\/li\u003e\n \u003cli\u003e\n  GPIO: General purpose IO (Digital capable).\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n Specifications:\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Frequency Range:  869-870 MHz\n \u003c\/li\u003e\n \u003cli\u003e\n  Output Power: 500mW (+27dBm), controllable in 1dB steps ( +\/- 1dB @=20dBm typical )\n \u003c\/li\u003e\n \u003cli\u003e\n  Air Data transfer rates: 12, 56, 64, 100, 125, 200, 224, kbit\/sec (User settable, 64kbit default)*\n \u003c\/li\u003e\n \u003cli\u003e\n  UART data transfer rates: 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400, 460800, 1M baud (User settable, 57600 default)* as per 868x EU\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n *note these values are correct as of version 3.16 SiK firmware\n\u003c\/p\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Output Power: 500mW (+27dBm) max\n \u003c\/li\u003e\n \u003cli\u003e\n  Receive Sensitivity: \u0026gt;111 dBm at 12kbps, 105 at 64 kbps and 98 at 200 kbps\n \u003c\/li\u003e\n \u003cli\u003e\n  Size: 25 mm (wide) x 33 mm (long) x 10.4 mm (thick) - Including RF Shield, PCB and Heatsink.\n \u003c\/li\u003e\n \u003cli\u003e\n  Weight: 10g\n \u003c\/li\u003e\n \u003cli\u003e\n  Mounting: Stand alone cable connection\n \u003c\/li\u003e\n \u003cli\u003e\n  Power Supply: +5 V nominal, (+3.5 V min, +5.5 V max), ~800 mA peak at maximum power\n \u003c\/li\u003e\n \u003cli\u003e\n  Temp. Range: -40 to +85 deg C\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n Software \/ GCS Support:\n\u003c\/h2\u003e\n\u003cp\u003e\n The software solution is an open source development called \"SiK\".  It has been re implemented to suit the new processor architecture available on the 32bit ARM processor core.  A boot loader and interface is available for further development and field upgrade of the modem firmware via the serial port.\n\u003c\/p\u003e\n\u003cp\u003e\n Most parameters are configurable via AT commands, Eg. baud rate (air\/uart), frequency band, power levels.\n\u003c\/p\u003e\n\u003cp\u003e\n Integrated support for configuring the RFD900 radios is supported by APM Planner.\n\u003c\/p\u003e\n\u003cp\u003e\n The default settings are at 57600 baud, N, 8, 1, and 200k air data rate.\n\u003c\/p\u003e\n\u003cp\u003e\n The RFD868ux EU manual is here:\n \u003ca href=\"http:\/\/files.rfdesign.com.au\/Files\/documents\/RFD900ux%20DataSheet%20v1.2.pdf\"\u003e\n  RFD900ux Manual\n \u003c\/a\u003e\n\u003c\/p\u003e\n\u003cp\u003e\n The RFD868ux EU SiK software manual is here :\n \u003ca href=\"http:\/\/files.rfdesign.com.au\/Files\/documents\/RFD900x%20Peer-to-peer%20V3.X%20User%20Manual%20V1.2.pdf\"\u003e\n  RFD900x Peer-to-peer Manual\n \u003c\/a\u003e\n\u003c\/p\u003e\n\u003ch2\u003e\n \u003cstrong\u003e\n  Software features include:\n \u003c\/strong\u003e\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Frequency hopping spread spectrum (FHSS)\n \u003c\/li\u003e\n \u003cli\u003e\n  Transparent serial link\n \u003c\/li\u003e\n \u003cli\u003e\n  Point to Point\n \u003c\/li\u003e\n \u003cli\u003e\n  Configuration by simple AT commands for local radio, RT commands for remote radio\n \u003c\/li\u003e\n \u003cli\u003e\n  User configurable serial data rates and air data rates\n \u003c\/li\u003e\n \u003cli\u003e\n  Error correction routines, Mavlink protocol framing (user selectable)\n \u003c\/li\u003e\n \u003cli\u003e\n  Mavlink radio status reporting (Local RSSI, Remote RSSI, Local Noise, Remote Noise)\n \u003c\/li\u003e\n \u003cli\u003e\n  Automatic antenna diversity switching on a packet basis in real time\n \u003c\/li\u003e\n \u003cli\u003e\n  Automatic duty cycle throttling based on radio temperature to avoid overheating\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n Compliance:\n\u003c\/h2\u003e\n\u003cp\u003e\n The RFD868ux-EU is compliant with the following standards:\n\u003c\/p\u003e\n\u003cul\u003e\n \u003cli\u003e\n  \u003cspan style=\"font-size: medium;\"\u003e\n   EN 301 489-3 V2.1.1\n  \u003c\/span\u003e\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003cspan style=\"font-size: medium;\"\u003e\n   EN 300 220-2 V3.1.1\n  \u003c\/span\u003e\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003cspan style=\"font-size: medium;\"\u003e\n   EN 62311:2008\n  \u003c\/span\u003e\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n \u003cspan style=\"font-size: small;\"\u003e\n  *Please note that some newer versions of the FTDI VCP driver namely version 2.12.36.1 have been reported\n \u003c\/span\u003e\n \u003cspan style=\"font-size: small;\"\u003e\n  as possibly incompatible with the FTDI cables we stock.  If you are experiencing issues, we recommend reverting to version 2.12.28 or before.\n \u003c\/span\u003e\n\u003c\/p\u003e\n","brand":"RFdesign","offers":[{"title":"Default Title","offer_id":56578187428221,"sku":"RFD868UX-EU","price":195.95,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/RFD868ux_Bundle__94500.1588690987.1280.1280__03590.jpg?v=1753830826"},{"product_id":"rf-design-rfd-868x-long-range-telemetry-modem-bundle","title":"RF Design RFD 868x Long Range Telemetry Modem Bundle","description":"\u003ch1\u003eRFD868x Long-Range Telemetry Modem Kit (UK)\u003c\/h1\u003e\n\n\u003cp\u003eWe’ve spent 10 years supplying commercial UAV radio systems to the UK, so we know your headaches. You need a reliable drone communication link that doesn't quit when your client demands a mission in freezing rain. The RFD868x is a professional-grade long-range telemetry modem built to keep your Ground Control Station (GCS) locked in. Powered by an ARM 32-bit core and open-source SiK firmware, it delivers a massive 500kbit\/s air data rate. Say goodbye to mid-flight panic and hello to rock-solid Mavlink protocol framing and FHSS (Frequency Hopping Spread Spectrum) reliability. With simultaneous RC PPM pass-through, this telemetry kit actually gets your data home, keeping CAA paperwork off your desk.\u003c\/p\u003e\n\n\u003ch3\u003eKey Highlights\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUnapologetic Range:\u003c\/strong\u003e \u0026gt;40km depending on antennas and GCS setup (80km demonstrated on a weather balloon), supported by real-time automatic antenna diversity switching.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHeavy-Duty Processing:\u003c\/strong\u003e ARM 32-bit core pushing 500kbit\/s air data rates with fully working AES hardware-accelerated encryption.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBulletproof Design:\u003c\/strong\u003e Every single I\/O port is fully ESD protected and filtered, backed by automatic duty cycle throttling to prevent overheating.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhy You Want This Long-Range Telemetry Modem\u003c\/h3\u003e\n\u003cp\u003eBecause dealing with signal loss mid-survey is bad for your blood pressure and worse for your margins. The RFD868x isn't just about raw power—though it has a full 1 Watt (+30dBm) of it. It’s engineered with a transmit low-pass filter, a \u0026gt;20dB low-noise amplifier (high IP3), and an RX SAW filter to punch through the noise floor.  Add in Mavlink radio status reporting (Local\/Remote RSSI and Noise) and beta support for asynchronous multipoint firmware, and you have a radio link that outsmarts the environment. Tested to survive operational temperatures from -73°C to +123°C, this modem will outlive your airframe, your client's patience, and probably you.\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 14.5g\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 30 mm (wide) x 57 mm (long) x 12.8 mm (thick) - Including RF Shield, Heatsink, and connectors\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFrequency Range:\u003c\/strong\u003e 868-869 MHz\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOutput Power:\u003c\/strong\u003e 1W (+30dBm), controllable in 1dB steps (+\/- 1dB @=20dBm typical)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAir Data Transfer Rates:\u003c\/strong\u003e 4, 8, 16, 19, 24, 32, 48, 64, 96, 128, 192, 250, and 500 kbit\/sec (User selectable, 64k default)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUART Data Transfer Rates:\u003c\/strong\u003e 9600, 19200, 38400, 57600, 115200, 400k, 921k baud (User selectable, 57600 default at N, 8, 1)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eReceive Sensitivity:\u003c\/strong\u003e \u0026gt;121 dBm at low data rates\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePower Supply:\u003c\/strong\u003e +5 V nominal (+3.5 V min, +5.5 V max), ~800 mA peak at maximum power\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInterfaces:\u003c\/strong\u003e 2 x RP-SMA RF connectors (diversity switched), Logic level TTL (+3.3v) Serial, 6x GPIO (Digital, ADC, PWM capable)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRF Architecture:\u003c\/strong\u003e Transmit low-pass filter, \u0026gt;20dB Low noise amplifier, RX SAW filter\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e 3 x M2.5 screws, 3 x header pin solder points\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTemperature Range:\u003c\/strong\u003e -40 to +85 deg C (Tested operational from -73 to +123 deg C)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e 3DR \/ Hope-RF radio modules, integrated APM Planner support\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003ch4\u003eCan I use the RFD868x for both RC control and telemetry at the same time?\u003c\/h4\u003e\n\u003cp\u003eYes. The RFD868x natively supports RC PPM pass-through concurrently with your telemetry data. It's designed specifically to streamline your payload wiring and reduce the number of potential failure points on your commercial rig.\u003c\/p\u003e\n\n\u003ch3\u003eWhat’s in the Box*\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e2× RFD868x Radio Modems\u003c\/li\u003e\n  \u003cli\u003e1× 868-900MHz Quarter wave monopole antenna (2.1dBi)\u003c\/li\u003e\n  \u003cli\u003e1× 868-900MHz Right Angle Quarter wave monopole antenna (2.1dBi)\u003c\/li\u003e\n  \u003cli\u003e4× 868-900MHz Half wave dipole antennas (3dBi)\u003c\/li\u003e\n  \u003cli\u003e1× FTDI USB cable\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eDisclaimer\u003c\/h2\u003e\n\u003cp\u003eDesigned for compliance with FCC Part 15.247 and AS\/NZS 4268:2012, but you are strictly responsible for ensuring compliance with your local UK\/European radio transmission laws. We supply the high-end hardware; we do not pay your fines if you decide to illegally blast 1W of transmit power in a restricted zone. Check your local regulations.\u003c\/p\u003e\n\n\u003ch2\u003eStill Here?\u003c\/h2\u003e\n\u003cp\u003eThe research balloon guys hit 80km with this exact setup. You're just trying to map a quarry without dropping packets. Put it in the cart and go get the job done.\u003c\/p\u003e","brand":"RFdesign","offers":[{"title":"Default Title","offer_id":56578191163773,"sku":"RFD868xB","price":209.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/products-RFD868x_Telemetry_Modem_Kit__55290.1505223234.1280.1280.jpg?v=1753830848"},{"product_id":"rfd-868x-long-range-telemetry-modem-sl4","title":"RFD 868x Long Range Telemetry Modem","description":"\u003cp\u003e\n If you are looking for a professional, high datarate, long range ardupilot compatible telemetry modem then the RFD868x is what you have been looking for. The RFD868x modem runs the same open source Sik firmware as used on the 3DR telemetry modems, however, the hardware on the 868x has been designed to offer some significant range and performance improvements over the standard 3DR telemetry kits.\n\u003c\/p\u003e\n\u003cp\u003e\n These modems feature a powerful ARM 32bit processor allowing for an air data rate of up to 500kbit\/s, with full support for RC PPM pass through. Designed for professional users in mind the modems also feature fully ESC protected and filtered design, allowing for ranges of greater than 40Km with high gain tracking antennas. So if you are looking for a professional level telemetry link and cheaper 433mhz unmanned telemetry kit doesn't cut it, then the RFdesign 868x Telemetry kit is what you need.\n\u003c\/p\u003e\n\u003ch2\u003e\n RFD868x New Features\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  New Processor, ARM 32 bit core.\n \u003c\/li\u003e\n \u003cli\u003e\n  Air data rate: 500kbit\/s.\n \u003c\/li\u003e\n \u003cli\u003e\n  AES Hardware accelerated encryption. *Fully working*\n \u003c\/li\u003e\n \u003cli\u003e\n  RC PPM Passthrough with telemetry at the same time.\n \u003c\/li\u003e\n \u003cli\u003e\n  Fully ESD protected + filtered - Every IO port is protected and filtered.\n \u003c\/li\u003e\n \u003cli\u003e\n  Original SiK point to point, multipoint firmware implemented.\n \u003c\/li\u003e\n \u003cli\u003e\n  Asynchronous multipoint firmware, *Beta release*\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n Key Features\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Long range \u0026gt;40km depending on antennas and GCS setup *80km demonstrated by Edge Research labs on a balloon !, 57km in India, on Dipoles.\n \u003c\/li\u003e\n \u003cli\u003e\n  2 x RP-SMA RF connectors, diversity switched.\n \u003c\/li\u003e\n \u003cli\u003e\n  1 Watt (+30dBm) transmit power.\n \u003c\/li\u003e\n \u003cli\u003e\n  Transmit low pass filter.\n \u003c\/li\u003e\n \u003cli\u003e\n  \u0026gt; 20dB Low noise amplifier, high IP3.\n \u003c\/li\u003e\n \u003cli\u003e\n  RX SAW filter.\n \u003c\/li\u003e\n \u003cli\u003e\n  All I\/O ESD protected and filtered.\n \u003c\/li\u003e\n \u003cli\u003e\n  Re implemented SiK and Multipoint SiK firmware, field upgradeable, easy to configure.\n \u003c\/li\u003e\n \u003cli\u003e\n  Small, light weight.\n \u003c\/li\u003e\n \u003cli\u003e\n  Compatible with 3DR \/ Hope-RF radio modules.\n \u003c\/li\u003e\n \u003cli\u003e\n  License free use in Australia, Canada, USA, NZ\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n Interfaces\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  RF : 2 x RP-SMA connectors\n \u003c\/li\u003e\n \u003cli\u003e\n  Serial: Logic level TTL (+3.3v)\n \u003c\/li\u003e\n \u003cli\u003e\n  Power: +5v, ~800mA max peak (at maximum transmit power)\n \u003c\/li\u003e\n \u003cli\u003e\n  GPIO: 6 General purpose IO (Digital, ADC, PWM capable).\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n Specifications\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Frequency Range:  868-869 MHz\n \u003c\/li\u003e\n \u003cli\u003e\n  Output Power: 1W (+30dBm), controllable in 1dB steps ( +\/- 1dB @=20dBm typical )\n \u003c\/li\u003e\n \u003cli\u003e\n  Air Data transfer rates: 4, 8, 16, 19, 24, 32, 48, 64, 96, 128, 192 and 250, 500 kbit\/sec ( User selectable, 64k default )\n \u003c\/li\u003e\n \u003cli\u003e\n  UART data transfer rates: 9600, 19200, 38400, 57600, 115200, 400k, 921k baud  ( User selectable, 57600 default )\n \u003c\/li\u003e\n \u003cli\u003e\n  Output Power: 1W (+30dBm)\n \u003c\/li\u003e\n \u003cli\u003e\n  Receive Sensitivity: \u0026gt;121 dBm at low data rates, high data rates (TBA)\n \u003c\/li\u003e\n \u003cli\u003e\n  Size: 30 mm (wide) x 57 mm (long) x 12.8 mm (thick) - Including RF Shield, Heatsink and connector extremeties\n \u003c\/li\u003e\n \u003cli\u003e\n  Weight: 14.5g\n \u003c\/li\u003e\n \u003cli\u003e\n  Mounting: 3 x M2.5 screws, 3 x header pin solder points\n \u003c\/li\u003e\n \u003cli\u003e\n  Power Supply: +5 V nominal, (+3.5 V min, +5.5 V max), ~800 mA peak at maximum power\n \u003c\/li\u003e\n \u003cli\u003e\n  Temp. Range: -40 to +85 deg C, tested operational from -73 to +123 deg C.\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n Software \/ GCS Support\n\u003c\/h2\u003e\n\u003cp\u003e\n The software solution is an open source development called \"SiK\".  It has been re implemented to suit the new processor architecture available on the 32bit ARM processor core.  A boot loader and interface is available for further development and field upgrade of the modem firmware via the serial port.\n\u003c\/p\u003e\n\u003cp\u003e\n Most parameters are configurable via AT commands, Eg. baud rate (air\/uart), frequency band, power levels.\n\u003c\/p\u003e\n\u003cp\u003e\n Integrated support for configuring the RFD900 radios is supported by APM Planner.\n\u003c\/p\u003e\n\u003cp\u003e\n The default settings are at 57600 baud, N, 8, 1, and 64k air data rate.\n\u003c\/p\u003e\n\u003cp\u003e\n The RFD868\/900x manual is here:\n \u003ca href=\"http:\/\/files.rfdesign.com.au\/Files\/documents\/RFD900x%20DataSheet.pdf\"\u003e\n  RFD900x Manual\n \u003c\/a\u003e\n\u003c\/p\u003e\n\u003cp\u003e\n The RFD868\/900x SiK software manual is here :\n \u003ca href=\"http:\/\/files.rfdesign.com.au\/Files\/documents\/RFD900x%20Peer-to-peer%20User%20Manual.pdf\"\u003e\n  RFD900x Peer-to-peer Manual\n \u003c\/a\u003e\n\u003c\/p\u003e\n\u003ch3\u003e\n Software features include:\n\u003c\/h3\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Frequency hopping spread spectrum (FHSS)\n \u003c\/li\u003e\n \u003cli\u003e\n  Transparent serial link\n \u003c\/li\u003e\n \u003cli\u003e\n  Point to Point, or Multipoint networking\n \u003c\/li\u003e\n \u003cli\u003e\n  Configuration by simple AT commands for local radio, RT commands for remote radio\n \u003c\/li\u003e\n \u003cli\u003e\n  User configurable serial data rates and air datarates\n \u003c\/li\u003e\n \u003cli\u003e\n  Error correction routines, Mavlink protocol framing (user selectable)\n \u003c\/li\u003e\n \u003cli\u003e\n  Mavlink radio status reporting (Local RSSI, Remote RSSI, Local Noise, Remote Noise)\n \u003c\/li\u003e\n \u003cli\u003e\n  Automatic antenna diversity switching on a packet basis in realtime\n \u003c\/li\u003e\n \u003cli\u003e\n  Automatic duty cycle throttling based on radio temperature to avoid overheating\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\n Compliance\n\u003c\/h3\u003e\n\u003cp\u003e\n The RFD868 is designed to be compliant with the following standards:\n\u003c\/p\u003e\n\u003cul\u003e\n \u003cli\u003e\n  FCC Part 15.247 (Frequency hopping and digitally modulated intentional radiators)\n \u003c\/li\u003e\n \u003cli\u003e\n  AS\/NZS 4268:2012 (Radio equipment and systems - short range devices)\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n The modem is designed for system integrators who will integrate the modem into their own projects and product prototypes.  The user is responsible for compliance with local regulations for radio transmitters.\n\u003c\/p\u003e\n","brand":"RFdesign","offers":[{"title":"Default Title","offer_id":56578192834941,"sku":"MODEM-RFD868x","price":97.53,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/RFD868x_web__67094.1489662892.1280.1280.jpg?v=1753830861"},{"product_id":"rfd-868ux-long-range-telemetry-modem","title":"RFD 868ux Long Range Telemetry Modem","description":"\u003cp\u003e\n This is the RFD868ux on a double sided mini carrier board.  It comes with a mini JST connector and 2x u.Fl RF connectors and heat sink. **It requires the \"ux PIXHAWK2 to RFD900 Telemetry Cable\" - 150\/300mm to interface to your application.\n\u003c\/p\u003e\n\u003ch2\u003e\n RFD868ux New Features:\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Fully compatible with RFD868x modems.\n \u003c\/li\u003e\n \u003cli\u003e\n  Air data rate up to: 500kbit\/s.\n \u003c\/li\u003e\n \u003cli\u003e\n  AES Hardware accelerated encryption.\n \u003c\/li\u003e\n \u003cli\u003e\n  RC PPM Passthrough with telemetry at the same time.\n \u003c\/li\u003e\n \u003cli\u003e\n  SiK point to point firmware.\n \u003c\/li\u003e\n \u003cli\u003e\n  Note: Currently due to the bandwidth limitations of the 868 modems Asynchronous Mesh and Multipoint Firmware are not officially supported for the 868X modems and correct operation of this code cannot be guaranteed\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n Features:\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Long range \u0026gt;40km depending on antennas and GCS setup\n \u003c\/li\u003e\n \u003cli\u003e\n  2 x u.FL RF connectors, diversity switched.\n \u003c\/li\u003e\n \u003cli\u003e\n  1 Watt (+30dBm) transmit power.\n \u003c\/li\u003e\n \u003cli\u003e\n  Transmit low pass filter.\n \u003c\/li\u003e\n \u003cli\u003e\n  \u0026gt; 15dB Low noise amplifier, high IP3.\n \u003c\/li\u003e\n \u003cli\u003e\n  RX SAW filter.\n \u003c\/li\u003e\n \u003cli\u003e\n  All I\/O ESD protected and filtered.\n \u003c\/li\u003e\n \u003cli\u003e\n  Re implemented SiK and Multipoint SiK firmware, field upgradable, easy to configure.\n \u003c\/li\u003e\n \u003cli\u003e\n  Small, light weight.\n \u003c\/li\u003e\n \u003cli\u003e\n  License free use in Europe, India\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n Interfaces:\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  RF : 2x u.FL RF connectors\n \u003c\/li\u003e\n \u003cli\u003e\n  Serial: Logic level TTL (+3.3v)\n \u003c\/li\u003e\n \u003cli\u003e\n  Power: +5v, ~800mA max peak (at maximum transmit power)\n \u003c\/li\u003e\n \u003cli\u003e\n  GPIO: General purpose IO (Digital, ADC, PWM capable).\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n Specifications:\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Frequency Range:  866-869 MHz\n \u003c\/li\u003e\n \u003cli\u003e\n  Output Power: 1W (+30dBm), controllable in 1dB steps ( +\/- 1dB @=20dBm typical )\n \u003c\/li\u003e\n \u003cli\u003e\n  Air Data transfer rates: 12, 56, 64, 100, 125, 200, 224, 500 and 750 kbit\/sec (User settable, 64kbit default)*\n \u003c\/li\u003e\n \u003cli\u003e\n  UART data transfer rates: 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400, 460800, 1M baud (User settable, 57600 default)*\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n *note these values are correct as of version 3.07 SiK firmware\n\u003c\/p\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Output Power: 1W (+30dBm) max\n \u003c\/li\u003e\n \u003cli\u003e\n  Receive Sensitivity: \u0026gt;121 dBm at low data rates, high data rates (TBA)\n \u003c\/li\u003e\n \u003cli\u003e\n  Size: 25 mm (wide) x 33 mm (long) x 10.4 mm (thick) - Including RF Shield, PCB and Heatsink.\n \u003c\/li\u003e\n \u003cli\u003e\n  Weight: 10g\n \u003c\/li\u003e\n \u003cli\u003e\n  Mounting: Stand alone cable connection\n \u003c\/li\u003e\n \u003cli\u003e\n  Power Supply: +5 V nominal, (+3.5 V min, +5.5 V max), ~800 mA peak at maximum power\n \u003c\/li\u003e\n \u003cli\u003e\n  Temp. Range: -40 to +85 deg C\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n Software \/ GCS Support:\n\u003c\/h2\u003e\n\u003cp\u003e\n The software solution is an open source development called \"SiK\".  It has been re implemented to suit the new processor architecture available on the 32bit ARM processor core.  A boot loader and interface is available for further development and field upgrade of the modem firmware via the serial port. Most parameters are configurable via AT commands, Eg. baud rate (air\/uart), frequency band, power levels. Integrated support for configuring the RFD900 radios is supported by APM Planner. The default settings are at 57600 baud, N, 8, 1, and 200k air data rate. The RFD868ux manual is here:\n \u003ca href=\"http:\/\/files.rfdesign.com.au\/Files\/documents\/RFD900ux%20DataSheet%20v1.2.pdf\"\u003e\n  RFD900ux Manual\n \u003c\/a\u003e\n The RFD868ux SiK software manual is here :\n \u003ca href=\"http:\/\/files.rfdesign.com.au\/Files\/documents\/RFD900x%20Peer-to-peer%20V3.X%20User%20Manual%20V1.2.pdf\"\u003e\n  RFD900x Peer-to-peer Manual\n \u003c\/a\u003e\n\u003c\/p\u003e\n\u003ch2\u003e\n Software features include:\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Frequency hopping spread spectrum (FHSS)\n \u003c\/li\u003e\n \u003cli\u003e\n  Transparent serial link\n \u003c\/li\u003e\n \u003cli\u003e\n  Point to Point networking\n \u003c\/li\u003e\n \u003cli\u003e\n  Configuration by simple AT commands for local radio, RT commands for remote radio\n \u003c\/li\u003e\n \u003cli\u003e\n  User configurable serial data rates and air data rates\n \u003c\/li\u003e\n \u003cli\u003e\n  Error correction routines, Mavlink protocol framing (user selectable)\n \u003c\/li\u003e\n \u003cli\u003e\n  Mavlink radio status reporting (Local RSSI, Remote RSSI, Local Noise, Remote Noise)\n \u003c\/li\u003e\n \u003cli\u003e\n  Automatic antenna diversity switching on a packet basis in real time\n \u003c\/li\u003e\n \u003cli\u003e\n  Automatic duty cycle throttling based on radio temperature to avoid overheating\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n Compliance:\n\u003c\/h2\u003e\n\u003cp\u003e\n The modem is designed for system integrators who will integrate the modem into their own projects and product prototypes.  The user is responsible for compliance with local regulations for radio transmitters.\n\u003c\/p\u003e\n","brand":"RFdesign","offers":[{"title":"Default Title","offer_id":56578197651837,"sku":"MODEM-RFD868ux","price":79.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/RFD868ux-front-new__86240.1590081534.1280.1280.webp?v=1753830892"},{"product_id":"rfd900ux-multi-cable-30cm-for-rfd900ux-rfd868ux","title":"RFD900ux Multi Cable 30cm for RFD900ux\/RFD868ux","description":"\u003cp\u003e\n Introducing the Pixhawk 2 Autopilot RFD900ux Interface Cable - designed specifically for UAV drone builders. This cable allows for seamless connection between your RFD900ux or RFD868ux modem and the TELEM port on your PixHawk Carrier board.\n\u003c\/p\u003e\n\u003cp\u003e\n With its longer length of 11.8 inches (300mm), this cable gives you the flexibility to position your modem in the most convenient and tidy location for your installation. It adapts the JST-GH 10 way connector to a 6 way Pixhawk interface, 2 pin external power and 3 pin PPM out connectors, making the connection process simple and hassle-free.\n\u003c\/p\u003e\n\u003cp\u003e\n This cable is designed specifically for the RFD900ux series modems, and is not suitable for the standard RFD900ux RFD868ux series modem. With a lightweight of 4g, this cable is easy to handle and perfect for your UAV drone building needs.\n\u003c\/p\u003e\n\u003cp\u003e\n Eliminate the hassle of messy and complicated wiring with the Pixhawk 2 Autopilot RFD900ux Interface Cable. Order yours today and experience the convenience of a seamless modem-to-autopilot connection.\n\u003c\/p\u003e\n","brand":"RFdesign","offers":[{"title":"Default Title","offer_id":56578319581565,"sku":"CABLE-R9UX-MULTI-300","price":5.76,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/900ux_connections_final__56122.webp?v=1753831780"},{"product_id":"rfd-868ux-900ux-to-8-way-socket-cable-ux","title":"RFD 868ux\/900ux to 8 way socket cable (ux)","description":"\u003cp\u003e\n Introducing the RFD900ux 8 way socket Interface Cable - the essential accessory for drone builders using RFD900ux modems. This cable is specifically designed to connect your APM1, 2 and FTDI cables seamlessly to your RFD900ux modem.\n\u003c\/p\u003e\n\u003cp\u003e\n This cable features DF13 compatible connectors that plug in easily, making your connections effortless and hassle-free. With its compact design, this cable measures 150mm in length and is made of AWG28. It's lightweight, at only 2.3g, making it easy to handle and perfect for your drone building needs.\n\u003c\/p\u003e\n\u003cp\u003e\n It's important to note that the cable has an arrow on the top left-hand corner, indicating the correct side facing up. Inserting the cable the incorrect way can cause damage to the modem, so it's crucial to check the orientation before plugging in.\n\u003c\/p\u003e\n\u003cp\u003e\n Don't let messy wiring get in the way of your drone building projects. Upgrade to the RFD900ux Interface Cable today and enjoy seamless connections and a hassle-free building experience.\n\u003c\/p\u003e\n\u003ch2\u003e\n Features\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Specifically designed for interfacing APM1, 2 and FTDI cables to the RFD900ux modem\n \u003c\/li\u003e\n \u003cli\u003e\n  Utilizes DF13 compatible connectors for easy plug-in connections\n \u003c\/li\u003e\n \u003cli\u003e\n  Compact design, measuring 150mm in length and made of AWG28\n \u003c\/li\u003e\n \u003cli\u003e\n  Lightweight at 2.3g, making it easy to handle and perfect for drone building projects\n \u003c\/li\u003e\n \u003cli\u003e\n  Cable features an arrow on the top left-hand corner indicating the correct side facing up\n \u003c\/li\u003e\n \u003cli\u003e\n  Inserting the cable incorrectly can cause damage to the modem, so proper orientation is crucial.\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n Included\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  1pc RFD 868ux\/900ux to 8 way socket cable (ux)\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n\u003c\/p\u003e\n\u003cp\u003e\n\u003c\/p\u003e\n","brand":"RFdesign","offers":[{"title":"Default Title","offer_id":56578320957821,"sku":"CABLE-868-900ux-8W-150","price":5.42,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/R9UX-8W-150_R1-0_900x_socekt_FINAL__91926.jpg?v=1753831793"},{"product_id":"rfd-telemetry-modem-to-pixhawk-2-telemetry-cable-75cm","title":"RFD Telemetry Modem to Pixhawk 2 Telemetry Cable 75cm","description":"\u003cp\u003e\n Introduce your drone building projects to the ultimate interfacing solution - the Pixhawk 2 Autopilot Interface Cable. Specifically designed to connect your Pixhawk 2 Autopilots to the RFD900 modem, this cable offers endless possibilities for a seamless and tidy installation.\n\u003c\/p\u003e\n\u003cp\u003e\n The cable's longer length of 29.5 inches (750mm) offers you the flexibility to position the modem in a variety of ways, ensuring a clean and organized setup. With its JST-GH 6 way to 0.1\" pitch socket, making connections is simple and straightforward.\n\u003c\/p\u003e\n\u003cp\u003e\n This cable is lightweight, weighing in at only 3.9g, making it easy to handle and perfect for your drone building needs. The cable is designed to make sure that the connections are secure and does not get disconnected during the flight.\n\u003c\/p\u003e\n\u003cp\u003e\n Upgrade your drone building projects with the Pixhawk 2 Autopilot Interface Cable and experience the convenience of easy and secure connections.\n\u003c\/p\u003e\n\u003ch2\u003e\n Features\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Specifically designed to interface Pixhawk 2 Autopilots to the RFD900 modem\n \u003c\/li\u003e\n \u003cli\u003e\n  Longer cable length of 29.5 inches (750mm) provides more options for positioning the modem for tidy installations\n \u003c\/li\u003e\n \u003cli\u003e\n  JST-GH 6 way to 0.1\" pitch socket makes connections simple and straightforward\n \u003c\/li\u003e\n \u003cli\u003e\n  Lightweight at 3.9g, easy to handle and perfect for drone building projects\n \u003c\/li\u003e\n \u003cli\u003e\n  Cable is designed to make sure that the connections are secure and does not get disconnected during the flight.\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n Included\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  1pc RFD Telemetry Modem to Pixhawk 2 Telemetry Cable 75cm\n \u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"RFdesign","offers":[{"title":"Default Title","offer_id":56578323448189,"sku":"CABLE-PIXHAWK2-RFD900-750MM","price":6.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/Pixhawk2_300mm_new_FINAL__83680.webp?v=1753831805"},{"product_id":"rfd-868-txmod-bundle-v2","title":"RFD 868x TXMOD Bundle V2","description":"\u003cp\u003e\n The RFDesign TXMOD is an all in one long range telemetry data and RC control system.\n\u003c\/p\u003e\n\u003cp\u003e\n Designed to work in conjunction with any Radio Controller capable of accepting JR Transmitter Modules, the RFD TX Module can transmit the PPM stream from the controller to the vehicle via the RFD868X long range telemetry modem while also receiving telemetry data received from the aircraft.\n\u003c\/p\u003e\n\u003cp\u003e\n The module's built in WiFi link allows for simple webpage based configuration and broadcasting of telemetry data to a computer or smart device.\n\u003c\/p\u003e\n\u003cp\u003e\n It is a JR style module that plugs into any RC transmitter that has can accept JR style modules (Frsky Taranis, JR, Frsky Horus)\n\u003c\/p\u003e\n\u003cp\u003e\n It provides a bridge between the RC transmitter and aircraft while carrying RC PPM data and mavlink telemetry streams at the same time.\n\u003c\/p\u003e\n\u003ch2\u003e\n Features\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Long range using RFD868x telemetry modem\n \u003c\/li\u003e\n \u003cli\u003e\n  2.4GHz WiFi  AP \/ Client modes with TCP + UDP packet support\n \u003c\/li\u003e\n \u003cli\u003e\n  Easy configuration by web-based wizard built in\n \u003c\/li\u003e\n \u003cli\u003e\n  Direct plug in to any RC transmitter with JR style modules (eg. Taranis X9D, Horus, ...)\n \u003c\/li\u003e\n \u003cli\u003e\n  Wide range 5-18V input supply\n \u003c\/li\u003e\n \u003cli\u003e\n  Optimised for use with Mavlink\/Mission Planner\/QGCS\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n Applications\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Long range remote control (RC) via PPM\n \u003c\/li\u003e\n \u003cli\u003e\n  Ground control station (GCS) telemetry gateway over WiFi\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n Resources\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  \u003ca href=\"http:\/\/files.rfdesign.com.au\/\"\u003e\n   Manual, Datasheet and Firmware\n  \u003c\/a\u003e\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n Dimensions\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  52.05 x 66.94 x 38mm\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n Kit Contents\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  The TXMOD kit consists of:\n \u003c\/li\u003e\n \u003cli\u003e\n  1 x RFD TXMOD\n \u003c\/li\u003e\n \u003cli\u003e\n  1 x RFD868x Radio Modem with new version v3.01 or later firmware\n \u003c\/li\u003e\n \u003cli\u003e\n  1 x Antenna, 868-900MHz Quarter wave monopole 2.1dBi\n \u003c\/li\u003e\n \u003cli\u003e\n  1 x Antenna, 868-900MHz Right Angle Quarter wave monopole 2.1dBi\n \u003c\/li\u003e\n \u003cli\u003e\n  4 x Antennas, 868-900MHz Half wave dipole 3dBi\n \u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"RFdesign","offers":[{"title":"Default Title","offer_id":56578338718077,"sku":"66A-86E-72C","price":249.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/RFD-868-TXmod-V2.jpg?v=1753831873"},{"product_id":"rfd868ux-txmod-v2-bundle-rc-transmitter-module","title":"RFD868ux TXMOD V2 Bundle (RC Transmitter Module)","description":"\u003ch2\u003e\n RFD868ux TXMOD V2 Bundle: Long-Range RC Control \u0026amp; Telemetry Powerhouse\n\u003c\/h2\u003e\n\u003cp\u003e\n Tired of your connection dropping faster than your enthusiasm on a Monday morning? Upgrade your setup with the\n \u003cstrong\u003e\n  RFD868ux TXMOD V2 Bundle\n \u003c\/strong\u003e\n , the all-in-one solution for robust,\n \u003cstrong\u003e\n  long-range telemetry data\n \u003c\/strong\u003e\n and\n \u003cstrong\u003e\n  RC control\n \u003c\/strong\u003e\n . Stop shouting commands at your drone from afar and start commanding respect (and your aircraft) from impressive distances.\n\u003c\/p\u003e\n\u003cp\u003e\n Designed for pilots who demand reliable performance, this\n \u003cstrong\u003e\n  JR style module\n \u003c\/strong\u003e\n seamlessly integrates with popular RC transmitters like FrSky Taranis, Horus, JR, and RadioMaster TX16S (if they accept JR modules, obviously). The TXMOD V2 acts as a sophisticated bridge, transmitting your PPM control inputs to your vehicle via the included\n \u003cstrong\u003e\n  RFD868ux modem\n \u003c\/strong\u003e\n , while simultaneously pulling vital\n \u003cstrong\u003e\n  Mavlink telemetry\n \u003c\/strong\u003e\n data back. And with V2, you now get\n \u003cstrong\u003e\n  SPORT telemetry\n \u003c\/strong\u003e\n support flowing back to your RC transmitter display!\n\u003c\/p\u003e\n\u003cp\u003e\n Forget clunky cables for setup. The built-in\n \u003cstrong\u003e\n  WiFi link\n \u003c\/strong\u003e\n allows for straightforward, web-based configuration and even lets you broadcast telemetry data directly to a ground station computer or smart device. It's like giving your drone a voice, without the awkward small talk.\n\u003c\/p\u003e\n\u003cp\u003e\n \u003cstrong\u003e\n  Key Features You'll Actually Care About:\n \u003c\/strong\u003e\n\u003c\/p\u003e\n\u003cul\u003e\n \u003cli\u003e\n  \u003cstrong\u003e\n   Go the Distance:\n  \u003c\/strong\u003e\n  Achieve reliable long-range RC control and telemetry links.\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003cstrong\u003e\n   JR Module Compatibility:\n  \u003c\/strong\u003e\n  Plugs directly into transmitters with a standard JR module bay. Easy peasy.\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003cstrong\u003e\n   Dual Stream Power:\n  \u003c\/strong\u003e\n  Handles your PPM RC commands and Mavlink telemetry streams concurrently.\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003cstrong\u003e\n   SPORT Telemetry Support (V2):\n  \u003c\/strong\u003e\n  Get that juicy flight data displayed right on your compatible transmitter.\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003cstrong\u003e\n   WiFi Enabled:\n  \u003c\/strong\u003e\n  Simple web configuration and telemetry broadcasting. Because it's the 21st century.\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003cstrong\u003e\n   All-Inclusive Bundle:\n  \u003c\/strong\u003e\n  Comes packed with the necessary modem, antennas, and cables to get you started.\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003cstrong\u003e\n   Crucial Compatibility Note:\n  \u003c\/strong\u003e\n  This system is designed specifically for use with RFDesign\n  \u003cstrong\u003e\n   X and UX series modems ONLY\n  \u003c\/strong\u003e\n  . Please double-check your existing gear or grab the right modem! Don't be\n  \u003cem\u003e\n   that\n  \u003c\/em\u003e\n  pilot.\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n \u003cstrong\u003e\n  Specifications:\n \u003c\/strong\u003e\n\u003c\/p\u003e\n\u003cul\u003e\n \u003cli\u003e\n  \u003cstrong\u003e\n   Frequency Band:\n  \u003c\/strong\u003e\n  868MHz ISM Band (Check local regulations!)\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003cstrong\u003e\n   Compatibility:\n  \u003c\/strong\u003e\n  RFDesign X and UX Series Modems\n  \u003cstrong\u003e\n   ONLY\n  \u003c\/strong\u003e\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003cstrong\u003e\n   RC Input:\n  \u003c\/strong\u003e\n  PPM Stream via JR Module Interface\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003cstrong\u003e\n   Telemetry:\n  \u003c\/strong\u003e\n  Mavlink, SPORT (V2 feature)\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003cstrong\u003e\n   Configuration Interface:\n  \u003c\/strong\u003e\n  WiFi Webpage\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003cstrong\u003e\n   Module Type:\n  \u003c\/strong\u003e\n  JR Standard Footprint\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003cstrong\u003e\n   Modem Included:\n  \u003c\/strong\u003e\n  RFD868ux (with v3.15+ firmware)\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n \u003cstrong\u003e\n  What's In The Box:\n \u003c\/strong\u003e\n\u003c\/p\u003e\n\u003cul\u003e\n \u003cli\u003e\n  1 x RFD868 TXMOD V2 RC Transmitter Module\n \u003c\/li\u003e\n \u003cli\u003e\n  1 x RFD868ux Radio Modem (running v3.15 or later firmware)\n \u003c\/li\u003e\n \u003cli\u003e\n  1 x Antenna, 868-900MHz Quarter wave monopole 2.1dBi\n \u003c\/li\u003e\n \u003cli\u003e\n  1 x Antenna, 868-900MHz Right Angle Quarter wave monopole 2.1dBi\n \u003c\/li\u003e\n \u003cli\u003e\n  4 x Antennas, 868-900MHz Half wave dipole 3dBi\n \u003c\/li\u003e\n \u003cli\u003e\n  1 x RFD868ux to 8-way socket cable\n \u003c\/li\u003e\n \u003cli\u003e\n  4 x RFD900u antenna cable (RPSMA)\n \u003c\/li\u003e\n \u003cli\u003e\n  1 x Pixhawk 2 to RFD868ux Telemetry Cable (150mm)\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003cstrong\u003e\n   Disclaimer:\n  \u003c\/strong\u003e\n  While we aim for consistency, the included accessories might occasionally vary slightly due to supply chain shenanigans. Rest assured, the core functionality remains awesome.\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n Need more technical deep-dives, datasheets, or setup guides? Head over to the official RFDesign documentation library: files.rfdesign.com.au\n\u003c\/p\u003e\n","brand":"RFdesign","offers":[{"title":"Default Title","offer_id":56578365227389,"sku":"RFD868UX-TXMODV2","price":279.91,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/868ux_bundle_final__64136.jpg?v=1753832008"},{"product_id":"rfd900x-us-modem-bundle-fcc-approved","title":"RFD900x-US Modem Bundle (FCC Approved)","description":"\u003ch2\u003e\n RFD900x Modem Bundle - Long-Range Telemetry Kit\n\u003c\/h2\u003e\n\u003cp\u003e\n When your drone's range anxiety kicks in, the\n \u003cstrong\u003e\n  RFD900x Modem Bundle\n \u003c\/strong\u003e\n is here to whisper sweet, uninterrupted telemetry across kilometers of airspace. Whether you're building a UAV, UGV, or just like sending data over absurdly long distances for fun, this high-performance radio modem kit is your go-to comms sidekick.\n\u003c\/p\u003e\n\u003cp\u003e\n Engineered for serious users of\n \u003cstrong\u003e\n  long-range telemetry\n \u003c\/strong\u003e\n , the\n \u003cstrong\u003e\n  RFD900x\n \u003c\/strong\u003e\n series delivers robust, low-latency communication with advanced networking capabilities. Pair that with a buffet of antennas and the necessary cables, and you've got a plug-and-play setup that's about as close to telepathic control as the laws of physics allow.\n\u003c\/p\u003e\n\u003ch3\u003e\n Key Features:\n\u003c\/h3\u003e\n\u003cul\u003e\n \u003cli\u003e\n  \u003cstrong\u003e\n   RFD900x Modems (v6.1)\n  \u003c\/strong\u003e\n  - Upgraded for reliability and higher power output\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003cstrong\u003e\n   900MHz Frequency\n  \u003c\/strong\u003e\n  - Ideal for telemetry over long distances\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003cstrong\u003e\n   High-gain Antennas\n  \u003c\/strong\u003e\n  - Including dipole and monopole options for flexible setup\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003cstrong\u003e\n   FTDI USB Cable\n  \u003c\/strong\u003e\n  - For direct connection to your ground station\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003cstrong\u003e\n   Pixhawk 2.1 Cable\n  \u003c\/strong\u003e\n  - Seamlessly integrates with popular flight controllers\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n \u003cimg alt=\"\" class=\"alignnone size-full wp-image-723201\" height=\"852\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/RFD900V2_1531dd25-2060-45df-b905-67c5fef64ead.jpg?v=1754235871\" width=\"1574\"\u003e\n\u003c\/p\u003e\n\u003ch3\u003e\n Specifications:\n\u003c\/h3\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Frequency: 902-928 MHz ISM Band\n \u003c\/li\u003e\n \u003cli\u003e\n  Output Power: Up to 1W (30dBm)\n \u003c\/li\u003e\n \u003cli\u003e\n  Range: 40+ km (line-of-sight, antenna dependent)\n \u003c\/li\u003e\n \u003cli\u003e\n  Data Rate: Up to 250kbps\n \u003c\/li\u003e\n \u003cli\u003e\n  Interface: UART, USB via FTDI\n \u003c\/li\u003e\n \u003cli\u003e\n  Antenna Ports: 2x RP-SMA\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\n What's in the Box:\n\u003c\/h3\u003e\n\u003cul\u003e\n \u003cli\u003e\n  2 x RFD900x-US Radio Modems (1.4)\n \u003c\/li\u003e\n \u003cli\u003e\n  1 x Antenna, 900MHz Quarter wave monopole 2.1dBi (8.3)\n \u003c\/li\u003e\n \u003cli\u003e\n  1 x Antenna, 900MHz Right Angle Quarter wave monopole 2.1dBi (8.2)\n \u003c\/li\u003e\n \u003cli\u003e\n  4 x Antennas, 900MHz Half wave dipole 3dBi (8.4)\n \u003c\/li\u003e\n \u003cli\u003e\n  1 x FTDI USB cable (8.1)\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n \u003cstrong\u003e\n  Disclaimer:\n \u003c\/strong\u003e\n Contents may vary depending on current stock. If your antenna's a slightly different length than expected, it's not a glitch in the matrix—it's just supply chain gymnastics.\n\u003c\/p\u003e\n\u003cp\u003e\n \u003cstrong\u003e\n  Heads-up:\n \u003c\/strong\u003e\n Some newer FTDI VCP driver versions (specifically 2.12.36.1) have been known to throw tantrums with FTDI cables. If you're seeing issues, try rolling back to version 2.12.28 or earlier.\n\u003c\/p\u003e\n","brand":"RFdesign","offers":[{"title":"Default Title","offer_id":56578486010237,"sku":"BUNDLE-RFD900x-US","price":216.09,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/RFD900x-US-Modem-Bundle-1.webp?v=1753832801"},{"product_id":"rfd-900x-us-modem-fcc-approvedhs-8517-62-00-90","title":"RFD 900x-US Modem (FCC approved)(HS 8517.62.00.90)","description":"\u003cp\u003e\n \u003cspan style=\"font-weight: 400;\"\u003e\n  ​The\n \u003c\/span\u003e\n \u003cb\u003e\n  RFD900x Radio Modem V2\n \u003c\/b\u003e\n \u003cspan style=\"font-weight: 400;\"\u003e\n  is a high-performance, long-range wireless communication module operating in the 902-928 MHz ISM band. Designed for applications requiring robust data links over extended distances, it offers a line-of-sight range exceeding 40 km, depending on antenna configuration and environmental conditions.\n \u003c\/span\u003e\n\u003c\/p\u003e\n\u003cp\u003e\n \u003cimg alt=\"\" class=\"alignnone size-full wp-image-723102\" height=\"363\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/Screenshot-2025-03-31-221254.png?v=1754235866\" width=\"629\"\u003e\n\u003c\/p\u003e\n\u003cp\u003e\n \u003cb\u003e\n  Key Features:\n \u003c\/b\u003e\n\u003c\/p\u003e\n\u003cul\u003e\n \u003cli style=\"font-weight: 400;\"\u003e\n  \u003cb\u003e\n   Extended Range:\n  \u003c\/b\u003e\n  \u003cspan style=\"font-weight: 400;\"\u003e\n   Capable of maintaining communication links over 40 km, with potential for greater distances under optimal conditions.​\n  \u003c\/span\u003e\n \u003c\/li\u003e\n \u003cli style=\"font-weight: 400;\"\u003e\n  \u003cb\u003e\n   High Data Throughput:\n  \u003c\/b\u003e\n  \u003cspan style=\"font-weight: 400;\"\u003e\n   Supports air data rates up to 500 kbps, facilitating efficient data transmission.​\n  \u003c\/span\u003e\n \u003c\/li\u003e\n \u003cli style=\"font-weight: 400;\"\u003e\n  \u003cb\u003e\n   Flexible Networking:\n  \u003c\/b\u003e\n  \u003cspan style=\"font-weight: 400;\"\u003e\n   Compatible with various firmware options, including Point-to-Point and Multipoint SiK firmware, allowing for diverse network topologies.​\n  \u003c\/span\u003e\n \u003c\/li\u003e\n \u003cli style=\"font-weight: 400;\"\u003e\n  \u003cb\u003e\n   Enhanced Security:\n  \u003c\/b\u003e\n  \u003cspan style=\"font-weight: 400;\"\u003e\n   Incorporates AES hardware-accelerated encryption to ensure secure data communication.​\n  \u003c\/span\u003e\n \u003c\/li\u003e\n \u003cli style=\"font-weight: 400;\"\u003e\n  \u003cb\u003e\n   Diverse Firmware Options:\n  \u003c\/b\u003e\n  \u003cspan style=\"font-weight: 400;\"\u003e\n   Compatible with Peer-to-Peer (SiK), Asynchronous Mesh, and Multipoint Network firmware, allowing for flexible network architectures\n  \u003c\/span\u003e\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n \u003cimg alt=\"\" class=\"alignnone size-full wp-image-723201\" height=\"852\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/RFD900V2_95a9a807-c732-493d-b950-d5d6835f2c76.jpg?v=1754235868\" width=\"1574\"\u003e\n\u003c\/p\u003e\n\u003cp\u003e\n \u003cb\u003e\n  Specifications:\n \u003c\/b\u003e\n\u003c\/p\u003e\n\u003cul\u003e\n \u003cli style=\"font-weight: 400;\"\u003e\n  \u003cb\u003e\n   Frequency Range:\n  \u003c\/b\u003e\n  \u003cspan style=\"font-weight: 400;\"\u003e\n   902-928 MHz​\n  \u003c\/span\u003e\n \u003c\/li\u003e\n \u003cli style=\"font-weight: 400;\"\u003e\n  \u003cb\u003e\n   Transmit Power:\n  \u003c\/b\u003e\n  \u003cspan style=\"font-weight: 400;\"\u003e\n   Adjustable up to 1 Watt (+30 dBm) in 1 dBm increments​\n  \u003c\/span\u003e\n \u003c\/li\u003e\n \u003cli style=\"font-weight: 400;\"\u003e\n  \u003cb\u003e\n   Receiver Sensitivity:\n  \u003c\/b\u003e\n  \u003cspan style=\"font-weight: 400;\"\u003e\n   Better than -121 dBm at lower data rates\n  \u003c\/span\u003e\n \u003c\/li\u003e\n \u003cli style=\"font-weight: 400;\"\u003e\n  \u003cb\u003e\n   Dimensions:\n  \u003c\/b\u003e\n  \u003cspan style=\"font-weight: 400;\"\u003e\n   30 mm x 57 mm x 12.8 mm​\n  \u003c\/span\u003e\n \u003c\/li\u003e\n \u003cli style=\"font-weight: 400;\"\u003e\n  \u003cb\u003e\n   Weight:\n  \u003c\/b\u003e\n  \u003cspan style=\"font-weight: 400;\"\u003e\n   Approximately 14 grams\n  \u003c\/span\u003e\n \u003c\/li\u003e\n \u003cli style=\"font-weight: 400;\"\u003e\n  \u003cb\u003e\n   Operating Voltage:\n  \u003c\/b\u003e\n  \u003cspan style=\"font-weight: 400;\"\u003e\n   5V nominal (5V min, 5.5V max)​\n  \u003c\/span\u003e\n \u003c\/li\u003e\n \u003cli style=\"font-weight: 400;\"\u003e\n  \u003cb\u003e\n   Current Consumption:\n  \u003c\/b\u003e\n  \u003cspan style=\"font-weight: 400;\"\u003e\n   ~1A peak at +30 dBm transmit power; 60 mA typical in receive mode​\n  \u003c\/span\u003e\n \u003c\/li\u003e\n \u003cli style=\"font-weight: 400;\"\u003e\n  \u003cb\u003e\n   Operating Temperature:\n  \u003c\/b\u003e\n  \u003cspan style=\"font-weight: 400;\"\u003e\n   -40°C to +85°C​\n  \u003c\/span\u003e\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n \u003cb\u003e\n  In the Box:\n \u003c\/b\u003e\n\u003c\/p\u003e\n\u003cul\u003e\n \u003cli style=\"font-weight: 400;\"\u003e\n  \u003cspan style=\"font-weight: 400;\"\u003e\n   1x RFD900x Radio Modem​\n  \u003c\/span\u003e\n \u003c\/li\u003e\n \u003cli style=\"font-weight: 400;\"\u003e\n  \u003cspan style=\"font-weight: 400;\"\u003e\n   2x RP-SMA Antennas​\n  \u003c\/span\u003e\n \u003c\/li\u003e\n \u003cli style=\"font-weight: 400;\"\u003e\n  \u003cspan style=\"font-weight: 400;\"\u003e\n   1x FTDI Cable for configuration and firmware updates​\n  \u003c\/span\u003e\n \u003c\/li\u003e\n \u003cli style=\"font-weight: 400;\"\u003e\n  \u003cspan style=\"font-weight: 400;\"\u003e\n   Assorted mounting hardware​\n  \u003c\/span\u003e\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n \u003cb\u003e\n  Disclaimer:\n \u003c\/b\u003e\n \u003cspan style=\"font-weight: 400;\"\u003e\n  Accessories may vary depending on supply.​\n \u003c\/span\u003e\n\u003c\/p\u003e\n","brand":"RFdesign","offers":[{"title":"Default Title","offer_id":56578490564989,"sku":"RFD-MODEM-RFD900x-US","price":97.53,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/RFD-900x-Modem-1_23d18d65-0422-4549-a2c5-28bc4d555b42.webp?v=1753832830"},{"product_id":"rfd-868-txmod-rc-transmitter-jr-long-range-module","title":"RFD 868 TXMOD (RC transmitter JR long range module)","description":"\u003cp\u003e\n The RFDesign TXMOD is an all in one long range telemetry data and RC control system.\n\u003c\/p\u003e\n\u003cp\u003e\n Designed to work in conjunction with any Radio Controller capable of accepting JR Transmitter Modules, the RFD TX Module can transmit the PPM stream from the controller to the vehicle via the RFD868X long range telemetry modem while also receiving telemetry data received from the aircraft.\n\u003c\/p\u003e\n\u003cp\u003e\n The module's built in WiFi link allows for simple webpage based configuration and broadcasting of telemetry data to a computer or smart device.\n\u003c\/p\u003e\n\u003cp\u003e\n It is a JR style module that plugs into any RC transmitter that has can accept JR style modules (Frsky Taranis, JR, Frsky Horus)\n\u003c\/p\u003e\n\u003cp\u003e\n It provides a bridge between the RC transmitter and aircraft while carrying RC PPM data and mavlink telemetry streams at the same time.\n\u003c\/p\u003e\n\u003ch2\u003e\n Features\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Long range using RFD868x telemetry modem\n \u003c\/li\u003e\n \u003cli\u003e\n  2.4GHz WiFi  AP \/ Client modes with TCP + UDP packet support\n \u003c\/li\u003e\n \u003cli\u003e\n  Easy configuration by web-based wizard built in\n \u003c\/li\u003e\n \u003cli\u003e\n  Direct plug in to any RC transmitter with JR style modules (eg. Taranis X9D, Horus, ...)\n \u003c\/li\u003e\n \u003cli\u003e\n  Wide range 5-18V input supply\n \u003c\/li\u003e\n \u003cli\u003e\n  Optimised for use with Mavlink\/Mission Planner\/QGCS\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n Applications\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Long range remote control (RC) via PPM\n \u003c\/li\u003e\n \u003cli\u003e\n  Ground control station (GCS) telemetry gateway over WiFi\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n Resources\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  \u003ca href=\"http:\/\/files.rfdesign.com.au\/\"\u003e\n   Manual, Datasheet and Firmware\n  \u003c\/a\u003e\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n Dimensions\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  52.05 x 66.94 x 38mm\n \u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"RFdesign","offers":[{"title":"Default Title","offer_id":56613096587645,"sku":"2F9-C88-860","price":165.5,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/TXmod1_final__59551.1560314224.1280.1280_a0c5ffbd-c008-4233-bcac-41c94580a83e.jpg?v=1754233166"},{"product_id":"rfd-telemetry-modem-to-pixhawk-2-telemetry-cable-15cm","title":"RFD Telemetry Modem to Pixhawk 2 Telemetry Cable 15cm","description":"\u003cp\u003e\n This is a cable designed to interface Pixhawk 2 Autopilots to the RFD series telemetry modems.\n\u003c\/p\u003e\n\u003cp\u003e\n The longer length of this cable gives more options in positioning the modem for tidy installations.\n\u003c\/p\u003e\n\u003cp\u003e\n It makes connection simple, with JST-GH 6 way to, 0.1\" pitch socket.\n\u003c\/p\u003e\n\u003cp\u003e\n Length : 5.9\"  (150mm)\n\u003c\/p\u003e\n","brand":"RFdesign","offers":[{"title":"Default Title","offer_id":56613210161533,"sku":"CABLE-PIXHAWK2-RFD900-150mm","price":5.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/Pixhawk2_150mm_final2__11718.1503375976.1280.1280.jpg?v=1754233499"},{"product_id":"rfd-telemetry-modem-to-pixhawk-1-telemetry-cable-15cm","title":"RFD Telemetry Modem to Pixhawk 1 Telemetry Cable 15cm","description":"\u003cp\u003e\n This is a cable designed to interface Pixhawk v1 Autopilots to the RFD series telemetry modems.\n\u003c\/p\u003e\n\u003cp\u003e\n The longer length of this cable gives more options in positioning the modem for tidy installations.\n\u003c\/p\u003e\n\u003cp\u003e\n It makes connection simple, with DF13 6 way to, 0.1\" pitch socket.\n\u003c\/p\u003e\n\u003cp\u003e\n Length : 5.9\"  (150mm)\n\u003c\/p\u003e\n","brand":"RFdesign","offers":[{"title":"Default Title","offer_id":56613211603325,"sku":"CABLE-PIXHAWK-RFD900","price":5.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/Pixhawk1_100mm_new_FINAL__40302.1518582669.1280.1280.jpg?v=1754233511"},{"product_id":"rfd900x-multi-cable-30cm-for-rfd900x-rfd868x","title":"RFD900x Multi Cable 30cm for RFD900x\/RFD868x","description":"\u003cp\u003e\n Introducing the RFD900x TELEM Interface Cable - the perfect solution for connecting your RFD900x or RFD868x modem to your PixHawk Carrier board. With this cable, you can easily establish an external SBUS\/PPM connection and connect to an external 5V power supply.\n\u003c\/p\u003e\n\u003cp\u003e\n The 5V power supply is provided from a separate header, ensuring that your modem has access to the full transmit power (30dBm) it requires for optimal performance. The SBUS\/PPM I\/O cable is 3.3v tolerant and can act as a source or sink for both PPM and SBUS formats, making it versatile and adaptable to your needs.\n\u003c\/p\u003e\n\u003cp\u003e\n To ensure proper function and avoid damage to your modem, please note that the orientation of the cable is important. The black triangle on the cable should be aligned with the PIN 1 label on the 16w header on the RFD900x PCB, and the red wire should be on pin 4 of the modem.\n\u003c\/p\u003e\n\u003cp\u003e\n Measuring 300mm in length and weighing only 4g, this cable is lightweight and easy to handle, making it perfect for your UAV drone building needs. Don't settle for messy and complicated wiring - upgrade to the RFD900x TELEM Interface Cable today.\n\u003c\/p\u003e\n\u003ch2\u003e\n Features\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Allows for connection between RFD900x or RFD868x modem and TELEM port on PixHawk Carrier board\n \u003c\/li\u003e\n \u003cli\u003e\n  Provides external SBUS\/PPM connection\n \u003c\/li\u003e\n \u003cli\u003e\n  Allows for connection to external 5V power supply\n \u003c\/li\u003e\n \u003cli\u003e\n  5V power supply is provided from separate header for full transmit power (30dBm) use\n \u003c\/li\u003e\n \u003cli\u003e\n  SBUS\/PPM I\/O cable is 3.3v tolerant and can act as a source or sink for both PPM and SBUS formats\n \u003c\/li\u003e\n \u003cli\u003e\n  Cable orientation is important for proper function and to avoid damage to modem\n \u003c\/li\u003e\n \u003cli\u003e\n  Length: 300mm\n \u003c\/li\u003e\n \u003cli\u003e\n  Weight: 4g\n \u003c\/li\u003e\n \u003cli\u003e\n  Suitable for UAV drone building\n \u003c\/li\u003e\n \u003cli\u003e\n  Cable is designed specifically for the RFD900x series modems, and is not suitable for the standard RFD900u modem.\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n\u003c\/p\u003e\n","brand":"RFdesign","offers":[{"title":"Default Title","offer_id":56614484115837,"sku":"CABLE-R900X-MULTI-30CM","price":5.45,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/Cable-r9x-multi-300__86601.jpg?v=1754245474"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/collections\/RFD_cover.webp?v=1774374950","url":"https:\/\/www.unmannedtechshop.co.uk\/collections\/rfdesign.oembed","provider":"Unmanned Tech","version":"1.0","type":"link"}