{"title":"Flight Controllers \u0026 Electronics","description":"\u003cp\u003eAdvanced flight controllers, ESC stacks, and FPV electronics from SpeedyBee, T-Motor, and Flywoo. F4\/F7\/H7 processors with DroneCAN, GPS, and telemetry support.\u003c\/p\u003e\u003cp\u003eAll-in-one flight controller stacks, standalone FCs, 4-in-1 ESCs, and video transmitters for custom builds. Compatible with Betaflight, ArduPilot, and iNav firmware with UK technical support.\u003c\/p\u003e","products":[{"product_id":"px4-pixhawk-buzzer-and-safety-switch-1","title":"PX4\/Pixhawk Buzzer and Safety Switch","description":"\u003ch2\u003ePX4 \/ Pixhawk Buzzer and Safety Switch\u003c\/h2\u003e\n\u003cp\u003eGive a compatible Pixhawk setup a voice and a physical safety button. This buzzer and switch set provides audible autopilot feedback and access to the controller’s safety function. Less silent treatment from the flight controller.\u003c\/p\u003e\n\u003ch3\u003eWhat it does\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBuzzer: Provides audible alerts generated by your autopilot. The sounds and their meanings depend on your firmware and settings.\u003c\/li\u003e\n\u003cli\u003eSafety switch: Provides a physical control for the autopilot’s safety state. Arming and disarming are separate functions; this is not a universal arm\/disarm or emergency-stop button.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eIntended for compatible Pixhawk-style autopilots. Check your controller’s connections and pinout before ordering; compatibility varies between boards.\u003c\/p\u003e\n\u003ch3\u003eBefore fitting\u003c\/h3\u003e\n\u003cp\u003eRemove propellers before wiring or bench-testing, and follow your flight controller’s setup instructions.\u003c\/p\u003e","brand":"Unmanned Tech","offers":[{"title":"Default Title","offer_id":56578094727549,"sku":"PX4-Buzzer","price":6.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/download.jpg?v=1753829473"},{"product_id":"ardupilot-apm-2-8-flight-controller-board-1","title":"ArduPilot APM 2.8 Flight Controller Board","description":"\u003cblockquote\u003e\n\u003cp\u003eDue to the age of this product, we are only selling the APM2.8 as a legacy product, APM2.x hardware is no longer supported by current ArduPilot firmware and we will not offer any setup support\/advice. If the unit has a hardware issue out of the box we will help, but otherwise we cannot offer support on this item anymore. We suggest you rather consider the newer pixhawk based autopilots we sell.\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\u003cp\u003eThis is the legacy APM 2.8 flight controller. The sensors are exactly the same as the APM 2.6 flight controller however this has the option to use the built in compass, or external compass via a jumper. This makes the APM 2.8 ideal for use with multicopters and rovers.\u003c\/p\u003e\n\u003cp\u003eThe APM 2.8 is a complete open source autopilot system and the bestselling technology that won the prestigious Outback Challenge UAV competition. It allows the user to turn any fixed, rotary wing or multirotor vehicle (even cars and boats) into a fully autonomous vehicle; capable of performing programmed GPS missions with waypoints.\u003c\/p\u003e\n\u003cp\u003eThis revision of the board has an optional onboard compass, which is designed for vehicles (especially multicopters and rovers) where the compass should be placed as far from power and motor sources as possible to avoid magnetic interference. (On fixed wing aircraft it's often easier to mount APM far enough away from the motors and ESCs to avoid magnetic interference, so this is not as critical, but APM 2.8 gives more flexibility in that positioning and is a good choice for them, too). This is designed to be used with the 3DR uBlox GPS with Compass, so that the GPS\/Compass unit can be mounted further from noise sources than APM itself.\u003c\/p\u003e\n\u003cp\u003eAPM 2.8 requires a GPS unit for full autonomy.\u003c\/p\u003e\n\u003ch3\u003eUsing the built in compass\u003c\/h3\u003e\n\u003cp\u003eTo use the built in compass simply connect the jumper as shown below. If the compass jumper is removed then the APM board will use the external compass which is best for multirotors with a GPS\/compass module mounted externally\u003c\/p\u003e\n\u003cp\u003e\u003cimg width=\"179\" title=\"apm-internal-compass.jpg\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/apm-internal-compass.jpg?v=1754231354\" height=\"135\" class=\"__mce_add_custom__\" alt=\"apm-internal-compass.jpg\"\u003e .\u003c\/p\u003e\n\u003ch3\u003ePOWERFUL GROUND CONTROL SOFTWARE\u003c\/h3\u003e\n\u003cp\u003eThe downloadable mission planner software is what you use to configure and control your Ardupilot board, features include:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePoint-and-click waypoint entry, using Google Maps.\u003c\/li\u003e\n\u003cli\u003eSelect mission commands from drop-down menus\u003c\/li\u003e\n\u003cli\u003eDownload mission log files and analyze them\u003c\/li\u003e\n\u003cli\u003eConfigure APM settings for your airframe\u003c\/li\u003e\n\u003cli\u003eInterface with a PC flight simulator to create a full hardware-in-the-loop UAV simulator.\u003c\/li\u003e\n\u003cli\u003eSee the output from APM's serial terminal\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWHAT CAN THE APM BOARD CONTROL?\u003c\/h3\u003e\n\u003cp\u003eThe ArduPilot Mega board can control Planes, Copters and Rovers. All you need to do is load the appropriate software onto the board with a few clicks\u003c\/p\u003e\n\u003ch3\u003eFEATURES:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eArduino Compatible!\u003c\/li\u003e\n\u003cli\u003eIncludes 3-axis gyro, accelerometer, along with a high-performance barometer\u003c\/li\u003e\n\u003cli\u003eOnboard 4 MegaByte Dataflash chip for automatic datalogging\u003c\/li\u003e\n\u003cli\u003eOptional off-board GPS, uBlox LEA-6H module with Compass.\u003c\/li\u003e\n\u003cli\u003eOne of the first open source autopilot systems to use Invensense's 6 DoF Accelerometer\/Gyro MPU-6000.\u003c\/li\u003e\n\u003cli\u003eBarometric pressure sensor upgraded to MS5607, from Measurement Specialties.\u003c\/li\u003e\n\u003cli\u003eAtmel's ATMEGA2560 and ATMEGA32U-2 chips for processing and usb functions respectively.\u003c\/li\u003e\n\u003cli\u003eWeight: 30g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eRESOURCES:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca rel=\"noopener noreferrer\" href=\"http:\/\/plane.ardupilot.com\/\" target=\"_blank\"\u003e ArduPlane manual \u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca rel=\"noopener noreferrer\" href=\"http:\/\/copter.ardupilot.com\/\" target=\"_blank\"\u003e ArduCopter manual \u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca rel=\"noopener noreferrer\" href=\"http:\/\/rover.ardupilot.com\/\" target=\"_blank\"\u003e ArduRover manual \u003c\/a\u003e\u003c\/li\u003e\n\n\n\n\u003c\/ul\u003e","brand":"Unmanned Tech","offers":[{"title":"Default Title","offer_id":56578112127357,"sku":"APM2.8-1","price":37.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/ArduPilotAPM2.8FlightControllerBoard3.webp?v=1770046932"},{"product_id":"vibration-damping-mounting-set","title":"Vibration Damping Mounting Set","description":"\u003cp title=\"APM anti-vibration mount\"\u003e\n This is a set that allows for the vibration of the motors to be dampened for the flight controller of the copter\/plane. All you need to do is to mount your flight controller ontop of this anti-vibration mount and it will isolate the vibrations on your autopilot sensors. This is very important as this dampening effect can improve the performance significantly. The picture below demonstrates the difference in vibrations before using a vibration damping mount, and after one is applied. Here you have a choice of sizes; a smaller mounting set for flight controller such as the Flip 32+\/CC3D, or a bigger set for controller such as Pixhawks and APM boards.\n\u003c\/p\u003e\n\u003cp title=\"APM anti-vibration mount\"\u003e\n The large mounting set measures 72mm x 45mm which is ideal for Pixhawk\/ APM2.6\/ DJI NAZA size flight controllers, and the smaller one measures 45mm x 45mm and is suitable for CC3D, Flip32, and MiniAPM size flight controllers.\n\u003c\/p\u003e\n\u003cp title=\"APM anti-vibration mount\"\u003e\n \u003cstrong\u003e\n Note:\n \u003c\/strong\u003e\n why not check out the\n \u003ca href=\"https:\/\/www.unmannedtechshop.co.uk\/5-in-1-vibration-damping-plate-with-pdb\/\"\u003e\n 5-in-1 Vibration Damping Plate with PDB\n \u003c\/a\u003e\n that we sell? This is the vibration damping mounting set for the Pixhawk\/APM with an integrated PDB!\n\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003e\n Contents:\n\u003c\/h3\u003e\n\u003cp\u003e\n This pack includes:\n\u003c\/p\u003e\n\u003cul\u003e\n \u003cli\u003e\n 2 x anti-vibration boards\n \u003c\/li\u003e\n \u003cli\u003e\n 4 x anti-vibration balls\n \u003c\/li\u003e\n \u003cli\u003e\n Double-sided adhesive pads.\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n \u003cimg alt=\"APM anti-vibration mount\" height=\"444\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/c9844135-12ff-4816-a119-57a1ac19df18.jpg?v=1754238157\" title=\"APM anti-vibration mount\" width=\"719\"\u003e\n\u003c\/p\u003e\n\u003ch3\u003e\n Resources:\n\u003c\/h3\u003e\n\u003cul\u003e\n \u003cli\u003e\n \u003ca href=\"http:\/\/www.dronetrest.com\/t\/brief-guide-to-the-build-of-the-large-vibration-damping-mounting-set-for-pixhawk-etc\/1016\/1\"\u003e\n Guide for building your large vibration damping mounting set for Pixhawk etc\n \u003c\/a\u003e\n . (same principle can be applied to the small vibration damping mounting set).\n \u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"Unmanned Tech","offers":[{"title":"Large (Pixhawk\/APM)","offer_id":56578175762813,"sku":"ANTIVIB-LAR","price":2.95,"currency_code":"GBP","in_stock":true},{"title":"Small (Flip32+\/CC3D)","offer_id":56578175795581,"sku":"ANTIVIB-SMA","price":2.45,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/51VP10eRELL._AC_SL1001.jpg?v=1790771717"},{"product_id":"skystars-f722-hd-pro-4-flight-controller-3-6s-30x30","title":"SkyStars F722 HD Pro 4 Flight Controller 3-6S 30x30","description":"\u003cp\u003e\n Introducing the\n \u003cstrong\u003e\n SkyStars F722 HD PRO4 Flight Controller\n \u003c\/strong\u003e\n , designed not just to keep your drone in the air, but to dominate it! This isn't your everyday flight controller; it's a compact powerhouse packed with features that make it more akin to the Swiss Army knife of drone tech. Let's dive into what makes the F722 HD PRO4 a must-have for drone enthusiasts and tech aficionados alike.\n\u003c\/p\u003e\n\u003ch4\u003e\n High-Speed MCU \u0026amp; Superior Sensors\n\u003c\/h4\u003e\n\u003cp\u003e\n At the heart of the F722 HD PRO4 lies the\n \u003cstrong\u003e\n STM32F722RGT6 MCU\n \u003c\/strong\u003e\n , operating at a lightning-fast 216MHz. This ensures your flight commands are processed faster than you can say \"lift-off!\" Accompanying the robust MCU is the\n \u003cstrong\u003e\n MPU6000 Gyroscope\n \u003c\/strong\u003e\n , providing stable, smooth, and reliable flight dynamics, perfect for capturing cinematic shots or zipping through race gates.\n\u003c\/p\u003e\n\u003ch4\u003e\n Versatile Connectivity\n\u003c\/h4\u003e\n\u003cp\u003e\n The controller boasts an impressive array of connections:\n\u003c\/p\u003e\n\u003cul\u003e\n \u003cli\u003e\n \u003cstrong\u003e\n Six UART ports\n \u003c\/strong\u003e\n for multifunctional use.\n \u003c\/li\u003e\n \u003cli\u003e\n \u003cstrong\u003e\n PWM Outputs\n \u003c\/strong\u003e\n and\n \u003cstrong\u003e\n I2C\n \u003c\/strong\u003e\n for additional sensor and peripheral integration.\n \u003c\/li\u003e\n \u003cli\u003e\n \u003cstrong\u003e\n USB Type-C\n \u003c\/strong\u003e\n for modern, efficient PC connections.\n \u003c\/li\u003e\n \u003cli\u003e\n \u003cstrong\u003e\n DJI FPV OSD compatibility\n \u003c\/strong\u003e\n via any spare UART, ensuring seamless integration with top-tier visual equipment.\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\n LED and Power Features\n\u003c\/h4\u003e\n\u003cp\u003e\n Light up the skies with\n \u003cstrong\u003e\n 4 LED independent pads\n \u003c\/strong\u003e\n , supporting WS2812 programming for that personal touch in the night sky. The onboard\n \u003cstrong\u003e\n BEC with dual-channel output (5V\/10V 3A max)\n \u003c\/strong\u003e\n ensures a stable power supply, making your flying experience worry-free.\n\u003c\/p\u003e\n\u003ch4\u003e\n Robust Build and Thoughtful Extras\n\u003c\/h4\u003e\n\u003cul\u003e\n \u003cli\u003e\n \u003cstrong\u003e\n Input Voltage Support of 3-6S\n \u003c\/strong\u003e\n caters to a variety of setups, from conservative flyers to power-hungry beasts.\n \u003c\/li\u003e\n \u003cli\u003e\n \u003cstrong\u003e\n Integrated LDO 3.3V\n \u003c\/strong\u003e\n , ensuring delicate accessories get the right amount of power.\n \u003c\/li\u003e\n \u003cli\u003e\n \u003cstrong\u003e\n Compact Dimensions\n \u003c\/strong\u003e\n (30.5mm x 30.5mm installation size) make it a breeze to fit in most drone designs.\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\n In the Box:\n\u003c\/h4\u003e\n\u003cul\u003e\n \u003cli\u003e\n \u003cstrong\u003e\n 1x F722 HD Pro4 FC\n \u003c\/strong\u003e\n : The brain of your drone.\n \u003c\/li\u003e\n \u003cli\u003e\n Accessories Kit\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n Whether you're a dedicated drone racer, a fervent aerial photographer, or somewhere in between, the\n \u003cstrong\u003e\n SkyStars F722 HD PRO4 Flight Controller\n \u003c\/strong\u003e\n turns the sky into your personal playground. With its top-notch control features and robust build, this flight controller isn't just keeping up with the competition—it's flying circles around it!\n\u003c\/p\u003e\n\u003cp\u003e\n \u003cimg alt=\"\" class=\"alignnone size-full wp-image-688733\" height=\"2560\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/Skystars-F722-Hd-pro-4-FC-1-scaled.jpg?v=1754236480\" width=\"1052\"\u003e\n\u003c\/p\u003e\n\u003cp\u003e\n\u003c\/p\u003e\n","brand":"SkyStars","offers":[{"title":"Default Title","offer_id":56578177401213,"sku":"SK-F7WHD","price":44.9,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/Skystars-F722-Hd-pro-4-FC-3.jpg?v=1753830747"},{"product_id":"skystars-f405-mini-hd-v2-20x20-fc","title":"Skystars F405 Mini HD V2 20x20 FC","description":"\u003ch2\u003e\n Specifications\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n Item name: F405HD Mini Betaflight Flight Controller\n \u003c\/li\u003e\n \u003cli\u003e\n Input voltage: 3-6S LiPo(11.1V~22.2V)\n \u003c\/li\u003e\n \u003cli\u003e\n MCU:STM32F705RGT6 168MHz\n \u003c\/li\u003e\n \u003cli\u003e\n IMU: MPU6000 (SPI) \/ BMI270\n \u003c\/li\u003e\n \u003cli\u003e\n OSD: Betaflight OSD or DJI HD OSD (UART6)\n \u003c\/li\u003e\n \u003cli\u003e\n 6 hardware UARTS (UART1,2,3,4,5,6,)\n \u003c\/li\u003e\n \u003cli\u003e\n Receiver: TBS\/PPM\/SBUS\/IBUS\/DSM\n \u003c\/li\u003e\n \u003cli\u003e\n Barometer: YES\n \u003c\/li\u003e\n \u003cli\u003e\n Buzzer Pad: YES\n \u003c\/li\u003e\n \u003cli\u003e\n CURR Pad: YES\n \u003c\/li\u003e\n \u003cli\u003e\n BEC 5V 2A \u0026amp; 10V 2A(Max 3A)\n \u003c\/li\u003e\n \u003cli\u003e\n Blackbox: 8MB\n \u003c\/li\u003e\n \u003cli\u003e\n Firmware: SKYSTARS F405HD\n \u003c\/li\u003e\n \u003cli\u003e\n Mounting Holes: 20mm\/M3\n \u003c\/li\u003e\n \u003cli\u003e\n Weight: 4g\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n Includes\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n 1 x SkyStars F405 Mini HD V2 Flight Controller\n \u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"SkyStars","offers":[{"title":"Default Title","offer_id":56578180809085,"sku":"SK-F405HD2","price":33.8,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/SkystarsF405MiniHDV220x20FC.jpg?v=1770646659"},{"product_id":"t-motor-f7-pro-flight-controller","title":"T-Motor F7 Pro Flight Controller","description":"\u003ch1\u003eT-Motor F7 Pro Flight Controller (WiFi \u0026amp; Bluetooth)\u003c\/h1\u003e\n\u003cp\u003eLet’s be honest: crawling under your desk to plug a USB cable into a buried flight controller is a indignity no pilot should suffer in %current_year%. Enter the \u003cstrong\u003eT-Motor F7 Pro Flight Controller\u003c\/strong\u003e. This isn't just another 30x30 square of PCB; it’s a \u003cstrong\u003ewireless Betaflight tuning\u003c\/strong\u003e powerhouse designed for the \u003cstrong\u003ecinematic FPV\u003c\/strong\u003e professional and the cable-averse hobbyist. With 8 UARTs and support for massive \u003cstrong\u003eX8 cinelifter builds\u003c\/strong\u003e, it’s the brain your heavy-lift rig deserves.\u003c\/p\u003e\n\u003ch3\u003eWhy You Want It\u003c\/h3\u003e\n\u003cp\u003eBecause you value your sanity. The headline feature here is the built-in \u003cstrong\u003eWiFi and Bluetooth\u003c\/strong\u003e. Connect to the SpeedyBee app on your phone and flash firmware, reverse motor directions, or analyze Blackbox data without ever touching a computer. It’s magic, or sufficiently advanced technology, which is the same thing.\u003c\/p\u003e\n\u003cp\u003eBeyond the wireless wizardry, this board is built to work. It natively supports up to \u003cstrong\u003e8 motor outputs\u003c\/strong\u003e (no messy resource remapping needed for Octocopters) and handles input voltage up to \u003cstrong\u003e8S\u003c\/strong\u003e. That means you can run high-voltage setups for maximum efficiency on your cinema rigs. Plus, with a dedicated plug for the DJI Air Unit, you can get video up and running fast—though if you’re rocking the new O3, you might need to warm up the soldering iron (you were going to anyway).\u003c\/p\u003e\n\u003ch2\u003eT-Motor F7 Pro Specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMCU:\u003c\/strong\u003e STM32F722 RET6 (The industry standard for a reason)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGyro:\u003c\/strong\u003e ICM42688P (Newer, faster, better—just make sure your filtering is on point)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWireless:\u003c\/strong\u003e WiFi \u0026amp; Bluetooth (Throw your USB cables in the bin... okay, keep one, just in case)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput Voltage:\u003c\/strong\u003e 3S–8S (11.1V–33.6V for when you need serious power)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor Outputs:\u003c\/strong\u003e 8 PWM outputs (Perfect for X8 Cinelifters or just showing off)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUARTs:\u003c\/strong\u003e 8 (Enough for GPS, VTX, RX, LiDAR, and a coffee machine)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBEC:\u003c\/strong\u003e 5V\/3A \u0026amp; 10V\/2A (Juice for your hungry peripherals)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlackbox:\u003c\/strong\u003e 16MB Onboard Flash (Plenty of space to record your desyncs)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e 30.5×30.5mm (The classic footprint)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 8.1g (Lighter than a pound coin)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFirmware:\u003c\/strong\u003e Supports BetaFlight \u0026amp; INAV\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat’s in the Box*\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1× T-Motor F7 Pro Full Function Flight Controller\u003c\/li\u003e\n\u003cli\u003e1× Accessory Pack (Dampers, cables, and the hope that you wire it correctly)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eDisclaimer\u003c\/h2\u003e\n\u003cp\u003eWireless tuning is amazing, but it requires battery power. If you tune for too long without air cooling, your VTX will overheat and hate you. Plan accordingly.\u003c\/p\u003e\n\u003ch2\u003eStill Here?\u003c\/h2\u003e\n\u003cp\u003eYou’re reading about UART counts while your quad sits on the bench in pieces. We get it, research is procrastination's best friend. But seriously, if you’re building a cinematic rig or an X8, this is the flight controller that makes maintenance bearable. Add the \u003cstrong\u003eT-Motor F7 Pro\u003c\/strong\u003e to your basket and go create something cinematic.\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" class=\"alignnone size-full wp-image-587772\" height=\"840\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/F7-PRO-Details-1.jpg?v=1754237161\" width=\"1920\"\u003e \u003cimg alt=\"\" class=\"alignnone size-full wp-image-587775\" height=\"1067\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/F7-PRO-Details-2.jpg?v=1754237164\" width=\"1920\"\u003e \u003cimg alt=\"\" class=\"alignnone size-full wp-image-587778\" height=\"1032\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/F7-PRO-Details-3.jpg?v=1754237168\" width=\"1920\"\u003e \u003cimg alt=\"\" class=\"alignnone size-full wp-image-587781\" height=\"757\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/F7-PRO-Details-4.jpg?v=1754237171\" width=\"1920\"\u003e \u003cimg alt=\"\" class=\"alignnone size-full wp-image-587784\" height=\"793\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/F7-PRO-Details-5.jpg?v=1754237173\" width=\"1920\"\u003e \u003cimg alt=\"\" class=\"alignnone size-full wp-image-587787\" height=\"972\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/F7-PRO-Details-6.jpg?v=1754237176\" width=\"1920\"\u003e \u003cimg alt=\"\" class=\"alignnone size-full wp-image-587790\" height=\"806\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/F7-PRO-Details-7.jpg?v=1754237180\" width=\"1920\"\u003e \u003cimg alt=\"\" class=\"alignnone size-full wp-image-587793\" height=\"825\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/F7-PRO-Details-8.jpg?v=1754237183\" width=\"1920\"\u003e \u003cimg alt=\"\" class=\"alignnone size-full wp-image-587796\" height=\"818\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/F7-PRO-Details-9.jpg?v=1754237186\" width=\"1920\"\u003e \u003cimg alt=\"\" class=\"alignnone size-full wp-image-587799\" height=\"1226\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/F7-PRO-Details-10.jpg?v=1754237190\" width=\"1920\"\u003e \u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/1709618566790298.jpg?v=1767798868\"\u003e\u003c\/p\u003e","brand":"T-Motor","offers":[{"title":"Default Title","offer_id":56578185888125,"sku":"BFB-FF4-B1D","price":66.89,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/F7-PRO-1.webp?v=1753830804"},{"product_id":"speedybee-adapter-3","title":"SpeedyBee Adapter 3","description":"\u003ch2\u003e\n Features\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n Wireless Firmware Flasher \u0026amp; Configurator\n \u003c\/li\u003e\n \u003cli\u003e\n 30W Fast USB Charger\n \u003c\/li\u003e\n \u003cli\u003e\n Wireless Blackbox Analyser\n \u003c\/li\u003e\n \u003cli\u003e\n Wireless ESC Flasher\n \u003c\/li\u003e\n \u003cli\u003e\n 1-6S LiPo Checker\n \u003c\/li\u003e\n \u003cli\u003e\n iOS \u0026amp; Android Compatible\n \u003c\/li\u003e\n \u003cli\u003e\n USB-C \u0026amp; Micro USB\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n \u003ca href=\"https:\/\/old.unmannedtechshop.co.uk\/wp-content\/uploads\/2021\/11\/Manual_of_Adapter3_EN.pdf\"\u003e\n SpeedyBee Adapter 3 Manual\n \u003c\/a\u003e\n\u003c\/h2\u003e\n\u003cp\u003e\n \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/adapter3_info_90e4df56-1ebf-4e9d-9e5a-9e9d9b91f634.jpg?v=1754236605\"\u003e\n \u003cimg alt=\"\" class=\"alignnone size-full wp-image-555719\" height=\"1600\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/adapter3_info_90e4df56-1ebf-4e9d-9e5a-9e9d9b91f634.jpg?v=1754236605\" width=\"1000\"\u003e\n \u003c\/a\u003e\n\u003c\/p\u003e\n\u003cp\u003e\n \u003cstrong\u003e\n Turn your smartphone into your mobile FPV companion\n \u003c\/strong\u003e\n \u003cbr\u003e\n Connect to the SpeedyBee mobile app, and configure your flight controller anytime, anywhere. Or flash the latest version of Betaflight\/Emuflight\/INAV in just 2 minutes before your flight session. The choice is yours.\n\u003c\/p\u003e\n\u003cp\u003e\n \u003cstrong\u003e\n Analyzing Blackbox data has never been easier\n \u003c\/strong\u003e\n \u003cbr\u003e\n No laptop, no separate app, no hassle. Connect your quad to the SpeedyBee mobile app and analyze your Blackbox data* in just 1.5 minutes after a flight. Get the most out of your practice sessions now.\n \u003cbr\u003e\n \u003cem\u003e\n *Currently supports Betaflight and Emuflight only\n \u003c\/em\u003e\n\u003c\/p\u003e\n\u003cp\u003e\n \u003cstrong\u003e\n Configure your BLHeli_S ESCs wherever you want\n \u003c\/strong\u003e\n \u003cbr\u003e\n Why stop at the flight controller? Change your BLHeli_S ESCs setting or update the firmware anytime, anywhere. Broken motor? Solder it up, take your smartphone out, and configure your motor direction wirelessly with the latest SpeedyBee app\n \u003cbr\u003e\n - now supporting BLHeli_32 and BLHeli_S ESCs.\n\u003c\/p\u003e\n\u003cdiv class=\"title\"\u003e\n \u003cstrong\u003e\n Your LiPo batteries = Powerful 30W power banks\n \u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"subtitle\"\u003e\n Connect SpeedyBee Adapter 3 to a LiPo battery and charge your mobile phone* and tablets when you need them the most. Supports mainstream QC3.0\/AFC\/Apple 2.4A (iPhone 6s and above) and other fast charging protocols with charging power up to 30W. Complete with over-current protection, short-circuit protection and over-temperature protection to protect your gadgets from unwanted accidents.\n\u003c\/div\u003e\n\u003cdiv class=\"subtitle\"\u003e\n \u003cem\u003e\n *Charging function requires 2S LiPo and above.\n \u003c\/em\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"subtitle\"\u003e\n \u003cp\u003e\n \u003cstrong\u003e\n Forgot your LiPo checker? Don't Worry\n \u003c\/strong\u003e\n \u003cbr\u003e\n Connect your 1S - 6S LiPo and the display will immediately show your battery voltage and the remaining power with a specific colour code*. The built-in beeper will alert you if the remaining power is less than 40% to help extend your battery lifespan.\n \u003cbr\u003e\n *GREEN(\u0026gt;80%), WHITE(40-80%) and RED(\u0026lt;40%).\n \u003c\/p\u003e\n \u003cdiv class=\"title\"\u003e\n \u003cstrong\u003e\n WiFi + Bluetooth = the best of both worlds\n \u003c\/strong\u003e\n \u003c\/div\u003e\n \u003cdiv class=\"subtitle\"\u003e\n Use Bluetooth for quick access to your firmware configurator, or switch to Wi-Fi to flash firmware or download Blackbox data at a higher speed.\n \u003c\/div\u003e\n \u003cdiv class=\"subtitle\"\u003e\n \u003c\/div\u003e\n \u003cdiv class=\"subtitle\"\u003e\n \u003cdiv class=\"position-absolute1\"\u003e\n \u003cdiv class=\"title\"\u003e\n \u003cstrong\u003e\n SpeedyBee Adapter 3 VS SpeedyBee Adapter 2 VS OTG\n \u003c\/strong\u003e\n \u003c\/div\u003e\n \u003cdiv class=\"title\"\u003e\n \u003c\/div\u003e\n \u003c\/div\u003e\n \u003ctable class=\"speedybee-table\"\u003e\n \u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003e\n Item\n \u003c\/td\u003e\n \u003ctd\u003e\n SpeedyBee Adapter 3\n \u003c\/td\u003e\n \u003ctd\u003e\n SpeedyBee Adapter 2\n \u003c\/td\u003e\n \u003ctd\u003e\n OTG\n \u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e\n Support 1-6S LiPo input\n \u003c\/td\u003e\n \u003ctd class=\"td-center\"\u003e\n ✔\n \u003c\/td\u003e\n \u003ctd class=\"td-center\"\u003e\n ✔\n \u003c\/td\u003e\n \u003ctd class=\"td-center\"\u003e\n N\/A\n \u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e\n XT60 and PH2.0 connectors\n \u003c\/td\u003e\n \u003ctd class=\"td-center\"\u003e\n ✔\n \u003c\/td\u003e\n \u003ctd class=\"td-center\"\u003e\n ✔\n \u003c\/td\u003e\n \u003ctd class=\"td-center\"\u003e\n N\/A\n \u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e\n BF\/INAV\/EMU configuration\n \u003c\/td\u003e\n \u003ctd class=\"td-center\"\u003e\n ✔\n \u003c\/td\u003e\n \u003ctd class=\"td-center\"\u003e\n ✔\n \u003c\/td\u003e\n \u003ctd class=\"td-center\"\u003e\n ✔\n \u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e\n Flight control firmware upgrade\n \u003c\/td\u003e\n \u003ctd class=\"td-center\"\u003e\n ✔\n \u003c\/td\u003e\n \u003ctd class=\"td-center\"\u003e\n ✔\n \u003c\/td\u003e\n \u003ctd class=\"td-center\"\u003e\n ✘\n \u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e\n Built-in WiFi\n \u003c\/td\u003e\n \u003ctd class=\"td-center\"\u003e\n ✔\n \u003c\/td\u003e\n \u003ctd class=\"td-center\"\u003e\n ✔\n \u003c\/td\u003e\n \u003ctd class=\"td-center\"\u003e\n ✘\n \u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e\n Built-in Bluetooth\n \u003c\/td\u003e\n \u003ctd class=\"td-center\"\u003e\n ✔\n \u003c\/td\u003e\n \u003ctd class=\"td-center\"\u003e\n ✘\n \u003c\/td\u003e\n \u003ctd class=\"td-center\"\u003e\n ✘\n \u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e\n Blackbox downloader and analyzer\n \u003c\/td\u003e\n \u003ctd class=\"td-center\"\u003e\n ✔\n \u003c\/td\u003e\n \u003ctd class=\"td-center\"\u003e\n ✘\n \u003c\/td\u003e\n \u003ctd class=\"td-center\"\u003e\n ✘\n \u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e\n 8-bit BLHeli_S ESC firmware updater\n \u003c\/td\u003e\n \u003ctd class=\"td-center\"\u003e\n ✔\n \u003c\/td\u003e\n \u003ctd class=\"td-center\"\u003e\n ✘\n \u003c\/td\u003e\n \u003ctd class=\"td-center\"\u003e\n ✘\n \u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e\n Built-in MicroUSB and Type C connector\n \u003c\/td\u003e\n \u003ctd class=\"td-center\"\u003e\n ✔\n \u003c\/td\u003e\n \u003ctd class=\"td-center\"\u003e\n ✘\n \u003c\/td\u003e\n \u003ctd class=\"td-center\"\u003e\n ✘\n \u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e\n Fast charging output up to 30W\n \u003c\/td\u003e\n \u003ctd class=\"td-center\"\u003e\n ✔\n \u003c\/td\u003e\n \u003ctd class=\"td-center\"\u003e\n ✘\n \u003c\/td\u003e\n \u003ctd class=\"td-center\"\u003e\n ✘\n \u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e\n Built-In LiPo Voltage Checker\n \u003c\/td\u003e\n \u003ctd class=\"td-center\"\u003e\n ✔\n \u003c\/td\u003e\n \u003ctd class=\"td-center\"\u003e\n ✘\n \u003c\/td\u003e\n \u003ctd class=\"td-center\"\u003e\n ✘\n \u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/tbody\u003e\n \u003c\/table\u003e\n \u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch2\u003e\n Specifications\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n Input Voltage: 1-6S(3.8V+ for 1S)\n \u003c\/li\u003e\n \u003cli\u003e\n Power Input Connector: XT60-Male, PH2.0 male\n \u003c\/li\u003e\n \u003cli\u003e\n Required Mobile Device System Version: Android 7.0+ | iOS 12.0+\n \u003c\/li\u003e\n \u003cli\u003e\n Supported SpeedyBee App Version: V1.6.1 + for iOS | V1.5.6+ for Android\n \u003c\/li\u003e\n \u003cli\u003e\n Maximum Output Current for flight controllers: 700mA @5V\n \u003c\/li\u003e\n \u003cli\u003e\n Fast Charging Output interface: USB A Port\n \u003c\/li\u003e\n \u003cli\u003e\n Minimum Input Voltage for Charging output: 7.4V(2S LiPo)\n \u003c\/li\u003e\n \u003cli\u003e\n Supported Fast Charging Protocol: QC3.0\/QC2.0, AFC, FCP, SCP\/High SCP, PE2.0\/PE1.1, SFCP\n \u003c\/li\u003e\n \u003cli\u003e\n Max Fast Charging Current: 3.5A\n \u003c\/li\u003e\n \u003cli\u003e\n Max Fast Charging Power: 30W\n \u003c\/li\u003e\n \u003cli\u003e\n Case Material: ABS + PC\n \u003c\/li\u003e\n \u003cli\u003e\n Liquid Silicone Cable Length: 12.4cm\n \u003c\/li\u003e\n \u003cli\u003e\n Dimension(Main Body): 24.8x21.8x53.6mm\n \u003c\/li\u003e\n \u003cli\u003e\n Net Weight: 35g\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n Includes\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n 1x Speedy Bee Adapter 3\n \u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"SpeedyBee","offers":[{"title":"Default Title","offer_id":56578186117501,"sku":"47C-F84-29A","price":30.89,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/speedybee-adapter-3_3.webp?v=1753830809"},{"product_id":"tmotor-velox-v45a-v2-4in1-blheli-32-esc","title":"Tmotor Velox V45A V2 4in1 BLheli 32 ESC","description":"\u003cp\u003e\n This velox 45A is an affordable 4in1 ESC built by Tmotor. Part of the velox range, the goal is to make for some budget products while still adhering to the high reliability standard t-motor are known for. Not only does this ESC look the part (if bright colour is your thing) it is also affordable while running the latest blheli32 firmware. V2 uses new MOSFETS which improve performance by up to 15% compared to V1\n\u003c\/p\u003e\n\u003ch2\u003e\n Specifications\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n Input Power: 3-6S\n \u003c\/li\u003e\n \u003cli\u003e\n Continuous current : 4 x 45A\n \u003c\/li\u003e\n \u003cli\u003e\n Burst current : 4 x 55A (10S)\n \u003c\/li\u003e\n \u003cli\u003e\n Size : 44,6x41x7mm\n \u003c\/li\u003e\n \u003cli\u003e\n Weight : 21g\n \u003c\/li\u003e\n \u003cli\u003e\n BEC Output : 10V @ 2.0A\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n \u003cimg alt=\"\" class=\"aligncenter size-full wp-image-457790\" height=\"756\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/1610097585751521.jpg?v=1754237941\" width=\"940\"\u003e\n \u003cimg alt=\"\" class=\"aligncenter size-full wp-image-457772\" height=\"1130\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/1610097585246688.jpg?v=1754237944\" width=\"940\"\u003e\n \u003cimg alt=\"\" class=\"aligncenter size-full wp-image-457787\" height=\"922\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/1610097585749343.jpg?v=1754237946\" width=\"940\"\u003e\n \u003cimg alt=\"\" class=\"aligncenter size-full wp-image-457778\" height=\"869\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/1610097585504222.jpg?v=1754237948\" width=\"940\"\u003e\n \u003cimg alt=\"\" class=\"aligncenter size-full wp-image-457781\" height=\"946\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/1610097585530397.jpg?v=1754237950\" width=\"940\"\u003e\n \u003cimg alt=\"\" class=\"aligncenter size-full wp-image-457784\" height=\"962\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/1610097585616412.jpg?v=1754237953\" width=\"940\"\u003e\n \u003cimg alt=\"\" class=\"aligncenter size-full wp-image-457775\" height=\"748\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/1610097585414666.jpg?v=1754237955\" width=\"940\"\u003e\n \u003cimg alt=\"\" class=\"aligncenter size-full wp-image-457769\" height=\"862\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/1610097585164523.jpg?v=1754237957\" width=\"940\"\u003e\n\u003c\/p\u003e\n\u003ch2\u003e\n Included\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n 1 x T-Motor Velox V45A V2 4in1 ESC\n \u003c\/li\u003e\n \u003cli\u003e\n 4 x Dampers rubbers\n \u003c\/li\u003e\n \u003cli\u003e\n 1 x Input wires 14AWG - 130mm with XT60 soldered\n \u003c\/li\u003e\n \u003cli\u003e\n 1 x signal wire AWG Type\n \u003c\/li\u003e\n \u003cli\u003e\n 1 x capacitor\n \u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"T-Motor","offers":[{"title":"Default Title","offer_id":56578199126397,"sku":"038-B15-13F","price":52.95,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/1610097553889350815.jpg?v=1753830918"},{"product_id":"t-motor-f60a-3-8s-4in1-am32-mini-esc-20x20","title":"T-Motor F60A 4-8S 4in1 AM32 Mini ESC - 20x20","description":"\u003cp\u003e\n Say hello to the\n \u003cstrong\u003e\n T-Motor F60A Mini ESC\n \u003c\/strong\u003e\n - the pint-sized powerhouse every FPV pilot dreams of. Whether you're squeezing every bit of performance out of high KV motors or just love the thrill of 8S madness, this ESC has your back (and your flight stack). Built to handle whatever chaos your freestyle or racing shenanigans throw at it, the F60A proves that size really doesn't matter - unless we're talking about MOSFETs.\n\u003c\/p\u003e\n\u003ch4\u003e\n Why You'll Love It:\n\u003c\/h4\u003e\n\u003cul\u003e\n \u003cli\u003e\n \u003cstrong\u003e\n \"The Hulk of Mini ESCs\"\n \u003c\/strong\u003e\n \u003cbr\u003e\n Packs a punch with\n \u003cstrong\u003e\n 60A constant current\n \u003c\/strong\u003e\n and\n \u003cstrong\u003e\n 70A burst\n \u003c\/strong\u003e\n , making it as tough as your landings.\n \u003c\/li\u003e\n \u003cli\u003e\n \u003cstrong\u003e\n 20x20mm Mounting Pattern\n \u003c\/strong\u003e\n \u003cbr\u003e\n Perfect for builds where space is tighter than your race schedule.\n \u003c\/li\u003e\n \u003cli\u003e\n \u003cstrong\u003e\n 8S Voltage Support\n \u003c\/strong\u003e\n \u003cbr\u003e\n Go big or go home - it's ready for your adrenaline-fueled 8S setups.\n \u003c\/li\u003e\n \u003cli\u003e\n \u003cstrong\u003e\n Desync? What's That?\n \u003c\/strong\u003e\n \u003cbr\u003e\n Real-time temperature monitoring ensures smooth flying, even with those juicy high KV motors.\n \u003c\/li\u003e\n \u003cli\u003e\n \u003cstrong\u003e\n MOSFETs on Steroids\n \u003c\/strong\u003e\n \u003cbr\u003e\n With\n \u003cstrong\u003e\n over 60% more MOSFET heat-dissipation area\n \u003c\/strong\u003e\n , these bad boys keep your ESC cool and extend its lifespan.\n \u003c\/li\u003e\n \u003cli\u003e\n \u003cstrong\u003e\n Low Resistance = High Power\n \u003c\/strong\u003e\n \u003cbr\u003e\n Enjoy buttery-smooth flights without worrying about inefficiency stealing your fun.\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch4\u003e\n Features:\n\u003c\/h4\u003e\n\u003cul\u003e\n \u003cli\u003e\n \u003cstrong\u003e\n Compact 20x20mm Mounting Pattern\n \u003c\/strong\u003e\n : Small frame? No problem.\n \u003c\/li\u003e\n \u003cli\u003e\n \u003cstrong\u003e\n High Voltage Tolerance\n \u003c\/strong\u003e\n : Ready to laugh at voltage spikes.\n \u003c\/li\u003e\n \u003cli\u003e\n \u003cstrong\u003e\n Real-Time Temp Monitoring\n \u003c\/strong\u003e\n : Keeps things cool even when you're on fire.\n \u003c\/li\u003e\n \u003cli\u003e\n \u003cstrong\u003e\n 8S Support\n \u003c\/strong\u003e\n : For when 6S just doesn't cut it anymore.\n \u003c\/li\u003e\n \u003cli\u003e\n \u003cstrong\u003e\n Big MOSFET Energy\n \u003c\/strong\u003e\n : Handles the heat so you can handle the throttle.\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\n Geeky Specifications:\n\u003c\/h4\u003e\n\u003cul\u003e\n \u003cli\u003e\n \u003cstrong\u003e\n PWM Frequency\n \u003c\/strong\u003e\n : 16KHz-96KHz (default 24KHz - but who's counting?)\n \u003c\/li\u003e\n \u003cli\u003e\n \u003cstrong\u003e\n Dimensions\n \u003c\/strong\u003e\n : 36x47mm - small but mighty.\n \u003c\/li\u003e\n \u003cli\u003e\n \u003cstrong\u003e\n Mounting Holes\n \u003c\/strong\u003e\n : 20*20mm, 4mm diameter holes.\n \u003c\/li\u003e\n \u003cli\u003e\n \u003cstrong\u003e\n Input Voltage\n \u003c\/strong\u003e\n : 4-8S (yes, that's eight cells of adrenaline).\n \u003c\/li\u003e\n \u003cli\u003e\n \u003cstrong\u003e\n Constant Current\n \u003c\/strong\u003e\n : 60A, with a\n \u003cstrong\u003e\n burst of 70A\n \u003c\/strong\u003e\n .\n \u003c\/li\u003e\n \u003cli\u003e\n \u003cstrong\u003e\n Firmware\n \u003c\/strong\u003e\n : AM32 - because stock firmware is for mortals.\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch4\u003e\n What's in the Box:\n\u003c\/h4\u003e\n\u003cul\u003e\n \u003cli\u003e\n 1x T-Motor F60A 4-8S 4-in-1 AM32 Mini ESC (because one is all you need).\n \u003c\/li\u003e\n \u003cli\u003e\n 1x Amass XT60H-M Cable (stronger than your throttle finger).\n \u003c\/li\u003e\n \u003cli\u003e\n 1x FC Connector (because wires matter).\n \u003c\/li\u003e\n \u003cli\u003e\n 10x Grommets (you'll probably lose half of them).\n \u003c\/li\u003e\n \u003cli\u003e\n 1x Capacitor (a lifesaver for voltage spikes).\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003e\n Why Wait?\n\u003c\/h3\u003e\n\u003cp\u003e\n Upgrade your rig with the\n \u003cstrong\u003e\n T-Motor F60A Mini ESC\n \u003c\/strong\u003e\n - because your quad deserves the best, and let's face it, you probably need all the help you can get to stick those inverted yaw spins.\n\u003c\/p\u003e\n","brand":"T-Motor","offers":[{"title":"Default Title","offer_id":56578202009981,"sku":"TM-F60A-MINI-ESC","price":79.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/t-motor_mini_f60a_8s_4in1_esc_1.jpg?v=1753830934"},{"product_id":"iflight-blitz-mini-f7-flight-controller","title":"iFlight Blitz Mini F7 Flight Controller","description":"\u003ch2\u003e\n Features\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli style=\"font-weight: 400;\"\u003e\n Improved circuit design, better components, and lower electrical noise!\n \u003c\/li\u003e\n \u003cli style=\"font-weight: 400;\"\u003e\n DJI HD VTX Connector (Plug-and-Play \/ No soldering required)\n \u003c\/li\u003e\n \u003cli style=\"font-weight: 400;\"\u003e\n FC indicator LEDs for visual debugging\n \u003c\/li\u003e\n \u003cli style=\"font-weight: 400;\"\u003e\n With LC filter\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n Specifications\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n MCU: STM32 F722\n \u003c\/li\u003e\n \u003cli\u003e\n Gyro: MPU6000 \/ BMI270\n \u003cstrong\u003e\n (please note this IMU may change from batch to batch due to supply and pricing issues due to current chip shortages with MPU6000)\n \u003c\/strong\u003e\n \u003c\/li\u003e\n \u003cli\u003e\n Barometer: DPS310\n \u003c\/li\u003e\n \u003cli\u003e\n OSD Chip: AT7456E\n \u003c\/li\u003e\n \u003cli\u003e\n Flash: 16MB (Blackbox flash)\n \u003c\/li\u003e\n \u003cli\u003e\n UARTS: 6\n \u003c\/li\u003e\n \u003cli\u003e\n Motor outputs: 4x (SH1.0 connector)\n \u003c\/li\u003e\n \u003cli\u003e\n I2C serial: SDA \/ SLA pads\n \u003c\/li\u003e\n \u003cli\u003e\n Smartaudio \/ IRC Tramp VTX protocol supported\n \u003c\/li\u003e\n \u003cli\u003e\n LED controller: Yes\n \u003c\/li\u003e\n \u003cli\u003e\n Beeper pad: Yes\n \u003c\/li\u003e\n \u003cli\u003e\n Firmware target: IFRC-IFLIGHT_BLITZ_F722\n \u003c\/li\u003e\n \u003cli\u003e\n Mount pattern: 20x20 mm \/ 4mm PCB hole diameter, silicon grommets for M3 screws\n \u003c\/li\u003e\n \u003cli\u003e\n Dimensions: 30.5x27 mm\n \u003c\/li\u003e\n \u003cli\u003e\n Weight: 5g\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n Wiring Guide\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n \u003cspan style=\"color: #636363; font-family: sans-serif;\"\u003e\n UART 1 for VTX HD \/ Analog\n \u003c\/span\u003e\n \u003c\/li\u003e\n \u003cli\u003e\n \u003cspan style=\"color: #636363; font-family: sans-serif;\"\u003e\n UART 2 for a Receiver\n \u003c\/span\u003e\n \u003c\/li\u003e\n \u003cli\u003e\n \u003cspan style=\"color: #636363; font-family: sans-serif;\"\u003e\n UART 3\/4\/5 for GPS or other sensors that require a serial port\n \u003c\/span\u003e\n \u003c\/li\u003e\n \u003cli\u003e\n \u003cspan style=\"color: #636363; font-family: sans-serif;\"\u003e\n UART 6 for ESC Telemetry\n \u003c\/span\u003e\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n Tips\n\u003c\/h2\u003e\n\u003cp\u003e\n \u003cspan style=\"color: #636363; font-family: sans-serif;\"\u003e\n 1. F722 MCU has an inner inverter.\n \u003c\/span\u003e\n\u003c\/p\u003e\n\u003cp\u003e\n \u003cspan style=\"color: #636363; font-family: sans-serif;\"\u003e\n 2. SBUS、CRSF、ELRS、IBUS、DSM ETC... can be connected to any unused UART_RX ,we suggest you connect to Uart_RX2\n \u003c\/span\u003e\n\u003c\/p\u003e\n\u003cp\u003e\n \u003cspan style=\"color: #636363; font-family: sans-serif;\"\u003e\n 3. Frsky SmartPort，Tramp \u0026amp; Smartaudio can be connected to any unused UART_TX, we suggest you connect to Uart_TX1\n \u003c\/span\u003e\n\u003c\/p\u003e\n\u003cp\u003e\n \u003cspan style=\"color: #636363; font-family: sans-serif;\"\u003e\n 4. F.port can be connected to any unused UART_TX, we suggest you connect to Uart_TX2\n \u003c\/span\u003e\n\u003c\/p\u003e\n\u003cp\u003e\n \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/BF11373-BLITZ-MINI-F7.png?v=1754234292\"\u003e\n\u003c\/p\u003e\n","brand":"iFlight RC","offers":[{"title":"Default Title","offer_id":56578207089021,"sku":"695-957-A67","price":39.95,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/BLITZ-Mini-F7-FC-1000x1000-1.jpg?v=1753830958"},{"product_id":"iflight-blitz-mini-f4-flight-controller","title":"iFlight Blitz Mini F4 Flight Controller","description":"\u003ch2\u003e\n Features\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli style=\"font-weight: 400;\"\u003e\n Improved circuit design, better components, and lower electrical noise!\n \u003c\/li\u003e\n \u003cli style=\"font-weight: 400;\"\u003e\n DJI HD VTX Connector (Plug-and-Play \/ No soldering required)\n \u003c\/li\u003e\n \u003cli style=\"font-weight: 400;\"\u003e\n FC indicator LEDs for visual debugging\n \u003c\/li\u003e\n \u003cli style=\"font-weight: 400;\"\u003e\n With LC filter\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n Specifications\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n MCU：STM32F405\n \u003c\/li\u003e\n \u003cli\u003e\n Gyro: MPU6000 \/ BMI270\n \u003cstrong\u003e\n (please note this IMU may change from batch to batch due to supply and pricing issues due to current chip shortages with MPU6000)\n \u003c\/strong\u003e\n \u003c\/li\u003e\n \u003cli\u003e\n Barometer: No\n \u003c\/li\u003e\n \u003cli\u003e\n OSD Chip: AT7456E\n \u003c\/li\u003e\n \u003cli\u003e\n Flash: 16MB (Blackbox flash)\n \u003c\/li\u003e\n \u003cli\u003e\n UARTS: 6\n \u003c\/li\u003e\n \u003cli\u003e\n Motor outputs: 4x (SH1.0 connector)\n \u003c\/li\u003e\n \u003cli\u003e\n I2C serial: SDA \/ SCL pads\n \u003c\/li\u003e\n \u003cli\u003e\n Smartaudio \/ IRC Tramp VTX protocol supported\n \u003c\/li\u003e\n \u003cli\u003e\n LED controller: Yes\n \u003c\/li\u003e\n \u003cli\u003e\n Beeper pad: Yes\n \u003c\/li\u003e\n \u003cli\u003e\n Firmware target: IFRC-IFLIGHT_BLITZ_F405\n \u003c\/li\u003e\n \u003cli\u003e\n Mount pattern: 20x20 mm \/ 4mm PCB hole diameter\n \u003c\/li\u003e\n \u003cli\u003e\n Dimensions: 30.5x27 mm\n \u003c\/li\u003e\n \u003cli\u003e\n Weight: 5g\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n Included\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n 1x Flight Controller\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n Wiring Guide\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n \u003cspan style=\"color: #636363; font-family: sans-serif;\"\u003e\n UART 1 for VTX HD \/ Analog\n \u003c\/span\u003e\n \u003c\/li\u003e\n \u003cli\u003e\n \u003cspan style=\"color: #636363; font-family: sans-serif;\"\u003e\n UART 2 for a Receiver\n \u003c\/span\u003e\n \u003c\/li\u003e\n \u003cli\u003e\n \u003cspan style=\"color: #636363; font-family: sans-serif;\"\u003e\n UART 3\/4\/5 for GPS or other sensors that require a serial port\n \u003c\/span\u003e\n \u003c\/li\u003e\n \u003cli\u003e\n \u003cspan style=\"color: #636363; font-family: sans-serif;\"\u003e\n UART 6 for ESC Telemetry\n \u003c\/span\u003e\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n Tips\n\u003c\/h2\u003e\n\u003cp\u003e\n \u003cspan style=\"color: #636363; font-family: sans-serif;\"\u003e\n 1. F405 MCU has not inner UART inverter\n \u003c\/span\u003e\n\u003c\/p\u003e\n\u003cp\u003e\n \u003cspan style=\"color: #636363; font-family: sans-serif;\"\u003e\n 2. SBUS、CRSF、ELRS、IBUS、DSM ETC... can be connected to any unused UART_RX ,we suggest you connect to Uart_RX2\n \u003c\/span\u003e\n\u003c\/p\u003e\n\u003cp\u003e\n \u003cspan style=\"color: #636363; font-family: sans-serif;\"\u003e\n 3. Frsky SmartPort，Tramp \u0026amp; Smartaudio can be connected to any unused UART_TX, we suggest you connect to Uart_TX1\n \u003c\/span\u003e\n\u003c\/p\u003e\n\u003cp\u003e\n \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/BLITZ-F4-Mimi.png?v=1754234288\"\u003e\n\u003c\/p\u003e\n","brand":"iFlight RC","offers":[{"title":"Default Title","offer_id":56578208563581,"sku":"7D9-3AA-7B9","price":29.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/BLITZ-Mini-F4-Flight-Controller-1000x1000-1.jpg?v=1753830975"},{"product_id":"tmotor-f4-6a-aio-5in1-flight-controller","title":"TMotor F4 6A AIO 5in1 Flight Controller","description":"\u003cp\u003e\n The T-Motor F4 6A 1S AIO board is a compact and lightweight electronic speed control (ESC) board that is perfect for building small drones. It is designed to support a single cell input voltage of 1S and can handle a continuous current of 6A and a peak current of 7A. The board features the BlueJay ESC firmware, an STM32F411 MCU, a BMI270 gyro, and an ELRS 2.4GHz V2 receiver. The board also includes a 48CH 50mW Smartaudio 1.0 video transmitter (VTX) for transmitting video signals. It measures 29.5x29.5mm and weighs just 6.7g, making it easy to install in a variety of drone frames. The board has 25.5x25.5mm M2 holes for mounting.\n\u003c\/p\u003e\n\u003ch2\u003e\n Specifications\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n Input Voltage: 1S\n \u003c\/li\u003e\n \u003cli\u003e\n Continuous Current: 6A\n \u003c\/li\u003e\n \u003cli\u003e\n Peak Current: 7A\n \u003c\/li\u003e\n \u003cli\u003e\n ESC Firmware: BlueJay\n \u003c\/li\u003e\n \u003cli\u003e\n MCU: STM32F411\n \u003c\/li\u003e\n \u003cli\u003e\n Gyro: BMI270\n \u003c\/li\u003e\n \u003cli\u003e\n Receiver: SPI ELRS 2.4GHz V2\n \u003c\/li\u003e\n \u003cli\u003e\n VTX: 48CH 50mW Smartaudio 1.0\n \u003c\/li\u003e\n \u003cli\u003e\n Size: 29.5x29.5mm\n \u003c\/li\u003e\n \u003cli\u003e\n Weight: 6.7g\n \u003c\/li\u003e\n \u003cli\u003e\n Mounting Hole: 25.5x25.5mm (M2 Holes)\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n Included\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n 1x T-Motor F4 6A 1S AIO With VTX + ELRS\n \u003c\/li\u003e\n \u003cli\u003e\n Accessories (Gummies, Cable, Antenna)\n \u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"T-Motor","offers":[{"title":"Default Title","offer_id":56578219606397,"sku":"TM-06A-AIO","price":65.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/tmotor-06A-AIO-FC2.jpg?v=1753831052"},{"product_id":"pixhawk-base-carrier-board","title":"Pixhawk Base Carrier Board (Baseboard V2A)","description":"\u003cp\u003e\n This is the standard size base carrier board for the Pixhawk 6X, 5X FMU that has a few extra I\/O ports\n\u003c\/p\u003e\n\u003ch2\u003e\n Dimensions\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n Standard Baseboard: 92.3x40.2mm\n \u003c\/li\u003e\n \u003cli\u003e\n Weight\n \u003cul\u003e\n \u003cli\u003e\n Standard Baseboard: 51g\n \u003c\/li\u003e\n \u003c\/ul\u003e\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n Included\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n 1x Pixhawk Standard Baseboard V2A\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n Resources\n\u003c\/h2\u003e\n\u003cp\u003e\n \u003ca href=\"https:\/\/docs.holybro.com\/autopilot\/pixhawk-baseboards\/pixhawk-baseboard-v2-ports\"\u003e\n Pixhawk Baseboard v2 Ports | Holybro Docs\n \u003c\/a\u003e\n\u003c\/p\u003e\n","brand":"HolyBro","offers":[{"title":"Default Title","offer_id":56578220163453,"sku":"H18117","price":104.95,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/SKU18117_8.webp?v=1753831058"},{"product_id":"t-motor-13a-aio-flight-controller-sl4","title":"T Motor 13A AIO Flight Controller [SL4]","description":"\u003ch2\u003e\n Specifications\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n Input Voltage: 1S\n \u003c\/li\u003e\n \u003cli\u003e\n Continuous Current: 13A\n \u003c\/li\u003e\n \u003cli\u003e\n ESC Firmware: BLHeli32\n \u003c\/li\u003e\n \u003cli\u003e\n PWM Frequency: 24-96K\n \u003c\/li\u003e\n \u003cli\u003e\n MCU: STM32F411\n \u003c\/li\u003e\n \u003cli\u003e\n Gyro: BMI270\n \u003c\/li\u003e\n \u003cli\u003e\n Size: 29.5x29.5mm\n \u003c\/li\u003e\n \u003cli\u003e\n Weight: 5.7g\n \u003c\/li\u003e\n \u003cli\u003e\n Mounting Hole: 25.5x25.5mm (M2 Holes)\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n Included\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n 1x T-Motor F4 13A 1S AIO Board\n \u003c\/li\u003e\n \u003cli\u003e\n Accessories Kit (Gummies, Cables)\n \u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"T-Motor","offers":[{"title":"Default Title","offer_id":56578223243645,"sku":"TM-13A-AIO","price":83.34,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/TM-13A-AIO.jpg?v=1753831104"},{"product_id":"hglrc-specter-f722-40a-aio-flight-controller-mpu6000","title":"HGLRC Specter F722 40A AIO Flight Controller MPU6000","description":"\u003cp\u003e\n Elevate your drone flying experience with the HGLRC Specter F722 4-6S AIO Whoop\/Toothpick Flight Controller, featuring a robust 40A 8Bit 4in1 ESC. This high-performance controller is a fusion of advanced technology and user-friendly design, making it a must-have for drone enthusiasts.\n\u003c\/p\u003e\n\u003ch3\u003e\n Product Overview:\n\u003c\/h3\u003e\n\u003cul\u003e\n \u003cli\u003e\n \u003cstrong\u003e\n High-Performance Processor\n \u003c\/strong\u003e\n : Equipped with an STM32F722 MCU for smooth and reliable operation.\n \u003c\/li\u003e\n \u003cli\u003e\n \u003cstrong\u003e\n Advanced Gyroscope\n \u003c\/strong\u003e\n : Features the MPU6000 gyroscope, ensuring stable and responsive flight dynamics.\n \u003c\/li\u003e\n \u003cli\u003e\n \u003cstrong\u003e\n Versatile Interfaces\n \u003c\/strong\u003e\n : Includes a camera, receiver, and a unique HD\/analog two-in-one direct plug interface for seamless connectivity.\n \u003c\/li\u003e\n \u003cli\u003e\n \u003cstrong\u003e\n GPS Compatibility\n \u003c\/strong\u003e\n : Fully supports GPS modules, enhancing your navigation capabilities.\n \u003c\/li\u003e\n \u003cli\u003e\n \u003cstrong\u003e\n Firmware Flexibility\n \u003c\/strong\u003e\n : Comes with BLS firmware pre-installed and the option to flash Bluejay firmware for improved flight efficiency.\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\n Key Specifications:\n\u003c\/h3\u003e\n\u003cul\u003e\n \u003cli\u003e\n \u003cstrong\u003e\n MCU\n \u003c\/strong\u003e\n : STM32F722 for top-notch processing power.\n \u003c\/li\u003e\n \u003cli\u003e\n \u003cstrong\u003e\n MPU\n \u003c\/strong\u003e\n : MPU6000, providing accurate and stable gyroscopic feedback.\n \u003c\/li\u003e\n \u003cli\u003e\n \u003cstrong\u003e\n BEC\n \u003c\/strong\u003e\n : Reliable 5V2A output.\n \u003c\/li\u003e\n \u003cli\u003e\n \u003cstrong\u003e\n OSD and LED Support\n \u003c\/strong\u003e\n : Enhances user interface and visibility.\n \u003c\/li\u003e\n \u003cli\u003e\n \u003cstrong\u003e\n Bee Narrator\n \u003c\/strong\u003e\n : A unique feature for flight status feedback.\n \u003c\/li\u003e\n \u003cli\u003e\n \u003cstrong\u003e\n Current Ratings\n \u003c\/strong\u003e\n : Continuous current at 40A, with a peak of 50A for 10 seconds.\n \u003c\/li\u003e\n \u003cli\u003e\n \u003cstrong\u003e\n Protocols Supported\n \u003c\/strong\u003e\n : DSHOT600, Oneshot, Multishot.\n \u003c\/li\u003e\n \u003cli\u003e\n \u003cstrong\u003e\n Firmware\n \u003c\/strong\u003e\n : HGLRCF722AIO Flight Controller Firmware; BLS Electrochemical Firmware.\n \u003c\/li\u003e\n \u003cli\u003e\n \u003cstrong\u003e\n Electrical Specs\n \u003c\/strong\u003e\n : 8-bit electric with 4-6S 14.8V-22.2V (lipo) input voltage.\n \u003c\/li\u003e\n \u003cli\u003e\n \u003cstrong\u003e\n Dimensions\n \u003c\/strong\u003e\n : Compact size at 34x34mm, with 25.5x25.5mm.m2 mounting holes.\n \u003c\/li\u003e\n \u003cli\u003e\n \u003cstrong\u003e\n Weight\n \u003c\/strong\u003e\n : Lightweight at just 9.8g.\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n \u003cimg class=\"alignnone size-medium\" height=\"14567\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/HGLRC-Specter-40aio_26fbed3c-67ab-421a-89a8-3c741eba6936.webp?v=1754234053\" width=\"1200\"\u003e\n\u003c\/p\u003e\n\u003ch3\u003e\n In the Box:\n\u003c\/h3\u003e\n\u003cul\u003e\n \u003cli\u003e\n 1x HGLRC Specter 40A 4-6S AIO Flight Controller.\n \u003c\/li\u003e\n \u003cli\u003e\n Various cables and connectors including XT60 power cable, camera and receiver lines, and HD map passing lines.\n \u003c\/li\u003e\n \u003cli\u003e\n Mounting accessories: shock reduction columns, screws, and self-lock M2 nuts.\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n This HGLRC Specter F722 AIO controller is ideal for 2-4 inch ring machines and toothpick racks, supporting a wide range of drones. Its inclusion of all necessary accessories ensures you have everything you need for a quick and easy setup. Whether you're a seasoned pilot or a beginner, this flight controller will take your flying to new heights!\n\u003c\/p\u003e\n","brand":"HGLRC","offers":[{"title":"Default Title","offer_id":56578224456061,"sku":"HG-SPK722-45A","price":68.94,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/HGLRCSpecterF7224-6SAIOWhoopToothpickFlightController_w40A8Bit4in1ESC_-MPU6000_1200x1200_72e49195-0082-409f-9951-aec994a748cb.jpg?v=1753831110"},{"product_id":"replacement-flight-controller-for-cetus-brushed","title":"Replacement Flight Controller for Cetus (Brushed)","description":"\u003cp\u003e\n This is a replacement flight controller for the Cetus FPV Drone. Only to be used as a replacement part for the official Cetus drone should you crash or damage something.\n\u003c\/p\u003e\n\u003cp\u003e\n We will not offer any support for this if you want to use the board on your own custom drone\/project and is sold as is with no documentation.\n\u003c\/p\u003e\n","brand":"BetaFPV","offers":[{"title":"Default Title","offer_id":56578232713597,"sku":"B01040004_1","price":14.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/18999-20220211-3.webp?v=1772643072"},{"product_id":"kakute-h7-bluetooth-flight-controller","title":"Kakute H7 Bluetooth Flight Controller","description":"\u003cp\u003e\n \u003cstrong\u003e\n Ready to Ascend to New Heights? Meet the Holybro Kakute H7 V1.3 Flight Controller\n \u003c\/strong\u003e\n\u003c\/p\u003e\n\u003cp\u003e\n Tired of wrestling with flight controllers that feel like they're from the Stone Age? Stuck with wired connections that create more mess than they're worth? We hear your woes, dear FPV pilot. We know the struggle of the tangled wire, the unreliability of outdated tech, and the craving for seamless integration with the modern world.\n\u003c\/p\u003e\n\u003cp\u003e\n It's 2023, for crying out loud! Shouldn't flight controllers evolve like everything else? Why suffer with yesterday's technology, when your passion is pushing the limits and soaring through the skies? We feel your pain, and we're not just going to pat you on the back. We have the antidote to your air-borne ailments!\n\u003c\/p\u003e\n\u003cp\u003e\n \u003cstrong\u003e\n Solution:\n \u003c\/strong\u003e\n Introducing the\n \u003cstrong\u003e\n Holybro Kakute H7 V1.3 Flight Controller\n \u003c\/strong\u003e\n , the answer to all your FPV flying frustrations. It's so advanced; it might as well have a degree in aeronautical engineering!\n\u003c\/p\u003e\n\u003ch2\u003e\n Key Product Highlights:\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n \u003cstrong\u003e\n USB-C Connectivity:\n \u003c\/strong\u003e\n Leave the old connections behind, embrace the future!\n \u003c\/li\u003e\n \u003cli\u003e\n \u003cstrong\u003e\n 9V 3A BEC for VTX:\n \u003c\/strong\u003e\n Ideal for HD video transmitters like DJI\/Caddx FPV Air Unit \u0026amp; Caddx Vista. We've got your view covered in HD!\n \u003c\/li\u003e\n \u003cli\u003e\n \u003cstrong\u003e\n Integrated Bluetooth:\n \u003c\/strong\u003e\n Tune wirelessly on your phone with the SpeedyBee App. Because cables are for grandpas' radios!\n \u003c\/li\u003e\n \u003cli\u003e\n \u003cstrong\u003e\n 6x UARTs \u0026amp; Full Blackbox MicroSD Slot:\n \u003c\/strong\u003e\n It's like a Swiss army knife for your FPV needs, minus the awkward weight!\n \u003c\/li\u003e\n \u003cli\u003e\n \u003cstrong\u003e\n Betaflight Configuration:\n \u003c\/strong\u003e\n Information at your fingertips. Literally!\n \u003c\/li\u003e\n \u003cli\u003e\n \u003cstrong\u003e\n Autonomous Flight Ready:\n \u003c\/strong\u003e\n You'll feel like Tony Stark with this onboard barometer.\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n Whether you're an FPV rookie or a seasoned pilot, the Holybro Kakute H7 v1.3 has been engineered to perfection with the\n \u003cstrong\u003e\n latest specifications\n \u003c\/strong\u003e\n such as MCU - STM32H743, IMU - MPU6000, and Barometer - BMP280, among others. But wait, did we mention the professional underfill epoxy for mechanical reinforcement? It's like putting on a suit of armor, without the clunkiness.\n\u003c\/p\u003e\n\u003cp\u003e\n Worry no more about compatibility, as it supports\n \u003cstrong\u003e\n BetaFlight\n \u003c\/strong\u003e\n ,\n \u003cstrong\u003e\n INAV\n \u003c\/strong\u003e\n , and\n \u003cstrong\u003e\n ArduPilot\n \u003c\/strong\u003e\n . No more time wasted on head-scratching software issues.\n\u003c\/p\u003e\n\u003cp\u003e\n And if you order now, we'll throw in a packet of our patented anti-tangle thoughts, absolutely free! (Note: Thoughts are metaphorical, do not attempt to install them into the flight controller.)\n\u003c\/p\u003e\n\u003cp\u003e\n \u003cimg alt=\"\" class=\"alignnone size-full wp-image-671381\" height=\"1047\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/KakuteH7_v.13_Overview.webp?v=1754234734\" width=\"1440\"\u003e\n\u003c\/p\u003e\n\u003ch2\u003e\n Specifications\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n MCU - STM32H743 32-bit processor running at 480 MHz\n \u003cul\u003e\n \u003cli\u003e\n Professional underfill epoxy for mechanical reinforcement\n \u003c\/li\u003e\n \u003c\/ul\u003e\n \u003c\/li\u003e\n \u003cli\u003e\n IMU - MPU6000\n \u003c\/li\u003e\n \u003cli\u003e\n Barometer - BMP280\n \u003c\/li\u003e\n \u003cli\u003e\n OSD - AT7456E\n \u003c\/li\u003e\n \u003cli\u003e\n Onboard Bluetooth chip - ESP32-C3\n \u003cul\u003e\n \u003cli\u003e\n SpeedyBee IOS \u0026amp; Android App Compatible\n \u003c\/li\u003e\n \u003cli\u003e\n Note: The Bluetooth onboard is set to automatically turn off when the flight controller is unlocked (arm) and turn on automatically when the flight controller is locked (disarm) in Betaflight\n \u003c\/li\u003e\n \u003c\/ul\u003e\n \u003c\/li\u003e\n \u003cli\u003e\n 6x UARTs (1,2,3,4,6,7; UART2 is used for Bluetooth telemetry)\n \u003c\/li\u003e\n \u003cli\u003e\n 9x PWM Outputs (8 Motor Output, 1 LED)\n \u003c\/li\u003e\n \u003cli\u003e\n 2x JST-SH1.0 8pin ESC port (4in1 ESCs, x8\/Octocopter compatible)\n \u003c\/li\u003e\n \u003cli\u003e\n 1x JST-SH1.0 6pin VTX port (For HD System like Caddx Vista \u0026amp; Air Unit)\n \u003c\/li\u003e\n \u003cli\u003e\n Battery input voltage: 2S - 8S\n \u003c\/li\u003e\n \u003cli\u003e\n BEC 5V 2A Cont.\n \u003c\/li\u003e\n \u003cli\u003e\n BEC 9V 3A Cont\n \u003c\/li\u003e\n \u003cli\u003e\n USB Type-C\n \u003c\/li\u003e\n \u003cli\u003e\n Mounting - 30.5 x 30.5mm\/Φ4mm hole with Φ3mm Grommets\n \u003c\/li\u003e\n \u003cli\u003e\n Dimension - 35x35mm\n \u003c\/li\u003e\n \u003cli\u003e\n Weight - 8g\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n Included in the Package:\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n 1x Kakute H7 V1.3 Flight Controller\n \u003c\/li\u003e\n \u003cli\u003e\n 4x M3 Silicon Grommets\n \u003c\/li\u003e\n \u003cli\u003e\n 2x JST-SH1.0_8pin 150mm Cable (For ESCs)\n \u003c\/li\u003e\n \u003cli\u003e\n 2x JST-SH1.0_6pin 80mm \u0026amp; 150mm Cable (For DJI Air Unit)\n \u003c\/li\u003e\n \u003cli\u003e\n 1x JST-SH1.0_6pin Colored Silicon 150mm Cable (For Caddx HD System and other VTX)\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n Stop wallowing in wire-filled woes. Click that 'Add to Cart' button and fly your FPV to the future with the\n \u003cstrong\u003e\n Holybro Kakute H7 V1.3 Flight Controller\n \u003c\/strong\u003e\n . After all, why should birds have all the fun?\n\u003c\/p\u003e\n","brand":"HolyBro","offers":[{"title":"Default Title","offer_id":56578233106813,"sku":"300-D03-6E5","price":41.95,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/Kakute-H7-3.webp?v=1753831142"},{"product_id":"holybro-tekko32-f4-50a-4in1-esc","title":"Holybro Tekko32 F4 50A 4in1 ESC","description":"\u003ch1\u003eHolybro Tekko32 F4 4in1 50A ESC (30x30)\u003c\/h1\u003e\n\u003cp\u003eLooking to buy the Holybro Tekko32 F4 4in1 50A ESC in the UK? Since BLHeli_32 folded, open-source 32-bit speed has found its true home. This 30x30 4in1 ESC pairs a screaming 150MHz F4 MCU with native AM32 firmware to wipe out motor desyncs and throttle delay on 4S to 6S quadcopters. Supporting variable 16kHz–96kHz PWM frequencies and DShot1200 protocol execution, it keeps your Betaflight PID loop clean without overloading processor cycles. Backed by our 10 years of experience in the manufacturing and delivery of commercial FPV systems at Unmanned Tech, we bring you battle-tested hardware built to survive hard crashes while keeping the magic smoke safely trapped inside your MOSFETs.\u003c\/p\u003e\n\u003ch3\u003eKey Highlights\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e150MHz F4 Processing Power:\u003c\/strong\u003e Drastically outperforms legacy F3 (108MHz) and F0 (48MHz) MCUs for ultra-fast motor response and zero control lag.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNative AM32 Open-Source Firmware:\u003c\/strong\u003e Pre-flashed with target AM32_TEKKO32_4IN1_F421; adjust settings easily via the \u003ca href=\"https:\/\/am32.ca\/\"\u003eAM32 portal\u003c\/a\u003e or directly using the web-based \u003ca href=\"https:\/\/am32.ca\/configurator\"\u003eAM32 configurator\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGalvanic Isolation Architecture:\u003c\/strong\u003e Features separate drive and control circuits, expanding current-handling headroom while shielding sensitive logic lines from high-voltage motor electrical interference.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/Tekko32F44in150AESC_AM32_13_1800x1800_1fb7eec8-a688-4292-81af-9b2fb4daffc0.webp?v=1784805833\" alt=\"\"\u003e\u003c\/p\u003e\n\u003ch3\u003eWhy You Want It\u003c\/h3\u003e\n\u003cp\u003eIf you've spent one too many late nights nursing a soldering iron burn while staring blankly at Betaflight motor tabs trying to hunt down mid-throttle oscillations, the Tekko32 F4 is your ticket off the pain train. Holybro built this 30.5x30.5mm stack unit with physical separation between its high-power drive circuits and delicate logic controller. Pushing up to 96kHz PWM output, it makes your motors run noticeably smoother, cooler, and quieter across aggressive 6S freestyle flips and race gates. With a rating of 50A continuous (60A burst per channel), native telemetry, and an onboard analog current sensor, your OSD readout stays accurate down to the final battery cell drop.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eContinuous Current:\u003c\/strong\u003e 50A × 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBurst Current:\u003c\/strong\u003e 60A × 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput Voltage:\u003c\/strong\u003e 4–6S LiPo\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMCU:\u003c\/strong\u003e F4 MCU @ 150MHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePWM Frequency Range:\u003c\/strong\u003e 16kHz to 96kHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFirmware Target:\u003c\/strong\u003e AM32_TEKKO32_4IN1_F421\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupported Protocols:\u003c\/strong\u003e DShot 150\/300\/600\/1200, MultiShot, OneShot, Proshot, PWM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurrent Sensor:\u003c\/strong\u003e Onboard analog (Scale ratio: 120 - V1.9 Version)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eESC Telemetry:\u003c\/strong\u003e Supported\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBEC Output:\u003c\/strong\u003e No output BEC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Pattern:\u003c\/strong\u003e 30.5 x 30.5mm (M4 holes, M3 silicone anti-vibration grommets included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 48 x 37 x 6 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 13.8g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003ch4\u003eWhat firmware does the Holybro Tekko32 F4 4in1 50A ESC use?\u003c\/h4\u003e\n\u003cp\u003eThe Tekko32 F4 comes pre-flashed with open-source AM32 firmware using the AM32_TEKKO32_4IN1_F421 target. You can customize motor timing, rotation, and PWM parameters via Betaflight passthrough on Chromium browsers using the web-based \u003ca href=\"https:\/\/am32.ca\/configurator\"\u003eAM32 configurator\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eWhat’s in the Box*\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1× Holybro Tekko32 F4 4in1 50A ESC\u003c\/li\u003e\n\u003cli\u003e4× M3 Anti-Vibration Silicone Grommet Inserts\u003c\/li\u003e\n\u003cli\u003e1× 1000uF 35V Electrolytic Capacitor\u003c\/li\u003e\n\u003cli\u003e1× 8-pin to 8-pin 1mm Pitch 65mm Cable\u003c\/li\u003e\n\u003cli\u003e1× 8-pin to 8-pin 1mm Pitch 25mm Cable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eDisclaimer\u003c\/h2\u003e\n\u003cp\u003eHint: Always use a power filter device with TVS diodes when pairing this ESC with low KV motors or running high-voltage 6S setups to guard against inductive voltage spikes. We strongly advise soldering the included 1000uF 35V capacitor directly to the main XT60 battery pads before applying power.\u003c\/p\u003e\n\u003ch2\u003eStill Here?\u003c\/h2\u003e\n\u003cp\u003eYou could easily waste another three hours reading Discord flame wars about BLHeli_32 vs AM32 or re-watching your last desync crash in slow motion, but your quad frame isn't going to build itself. Grab this 150MHz F4 powerhouse today, solder those motor leads clean, and let us pay our UK light bill.\u003c\/p\u003e","brand":"HolyBro","offers":[{"title":"Default Title","offer_id":56578235662717,"sku":"AB0-D2C-3DB","price":52.9,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/SKU31102_1_1800x1800_9266ce4f-1ce3-4e29-b3a5-60af37d89c92.webp?v=1784805833"},{"product_id":"zeez-f7-2020-betaflight-flight-controller-v3-sl4","title":"Zeez F7 2020 Betaflight Flight Controller V3 [SL4]","description":"\u003cp\u003e\n Attention all drone enthusiasts! Get ready to take your drone to new heights with the ZEEZ F7 V3 2020 flight controller - the ultimate upgrade for your DJI HD system. This powerhouse controller features 8 motor output and an on-board 9V@3A regulator to power your DJI Air Unit, with a simple plug and play configuration. Plus, with a 5V@3A regulator to power all peripherals, you'll have everything you need to take off and fly like a pro!\n\u003c\/p\u003e\n\u003cp\u003e\n We didn't stop there - we packed the ZEEZ F7 V3 2020 with top-of-the-line hardware, including a powerful F7 processor, ICM42688P Gyro, and BMP388 Barometer. With a separate power rail for the cleanest data, you'll have the most accurate and reliable readings. And with a standard 20x20 form factor, it's easy to integrate into your existing setup.\n\u003c\/p\u003e\n\u003cp\u003e\n But that's not all - the ZEEZ F7 V3 2020 also features 5 UARTS and an I2C port, 16MB FLASH for Blackbox data recording, an OSD chip for analog video, and is compatible with both DJI and Caddx Vista. And with 8 motor compatibility and bigger pads for easy assembly, you'll be flying high in no time.\n\u003c\/p\u003e\n\u003ch2\u003e\n Key product highlights:\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n 8 motor output and on-board 9V@3A regulator for DJI Air Unit compatibility\n \u003c\/li\u003e\n \u003cli\u003e\n Powerful F7 processor, ICM42688P Gyro, and BMP388 Barometer for top-of-the-line performance and accuracy\n \u003c\/li\u003e\n \u003cli\u003e\n 5 UARTS, I2C port, 16MB FLASH for Blackbox data recording, and OSD chip for analog video for unbeatable versatility\n \u003c\/li\u003e\n \u003cli\u003e\n Compatible with DJI and Caddx Vista for maximum convenience and ease of use\n \u003c\/li\u003e\n \u003cli\u003e\n Standard 20x20 form factor and bigger pads for hassle-free assembly.\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n \u003cimg alt=\"\" class=\"alignnone size-full wp-image-656918\" height=\"1000\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/2020_FCV3_Top_4x_d07525ac-29b7-4f23-b6df-224a6688aa8f.webp?v=1754238466\" width=\"866\"\u003e\n \u003cimg alt=\"\" class=\"alignnone size-full wp-image-656919\" height=\"1669\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/2020_FCV3_Bottom_4x_c87e9491-1c3f-4cc2-bc06-94094a5731b3.webp?v=1754238468\" width=\"785\"\u003e\n\u003c\/p\u003e\n\u003ch2\u003e\n Specifications\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n Mounting holes: 20x20mm\n \u003c\/li\u003e\n \u003cli\u003e\n LiPo Power input: 3S-6S\n \u003c\/li\u003e\n \u003cli\u003e\n 8 Motor output\n \u003c\/li\u003e\n \u003cli\u003e\n BEC 5V-3A \/ 9V-3A\n \u003c\/li\u003e\n \u003cli\u003e\n STM32F722 MCU\n \u003c\/li\u003e\n \u003cli\u003e\n ICM42688P Gyro\/ACC\n \u003c\/li\u003e\n \u003cli\u003e\n BMP388 Barometer\n \u003c\/li\u003e\n \u003cli\u003e\n 5 available UARTs\n \u003c\/li\u003e\n \u003cli\u003e\n HD Plug for DJI Air Unit or Caddx Vista\n \u003c\/li\u003e\n \u003cli\u003e\n Bigger pads\n \u003c\/li\u003e\n \u003cli\u003e\n Onboard 16MB flash\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n Included\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n 1x Zeez F7 V3 2020 Flight Controller\n \u003c\/li\u003e\n \u003cli\u003e\n 1x Connector Cable Pack\n \u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"Zeez Design","offers":[{"title":"Default Title","offer_id":56578238185853,"sku":"399-F14-D7C","price":39.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/Zeez-FC2020_Top-2.webp?v=1753831181"},{"product_id":"lumenier-lux-f4-hd-ultimate-flight-controller","title":"Lumenier LUX F4 HD Ultimate Flight Controller","description":"\u003cp\u003e\n The Lumenier LUX F4 HD Ultimate Flight Controller is an advanced and powerful flight controller from Lumenier. It uses a fast and relaible F4 processor along with premium hardware components. Unleash the capabilities of your Cinema (Cine-Lifter) drone or FPV Racing Quadcopter with the Lumenier LUX F4 Ultimate Flight Controller. The LUX F4 is packed full of features including a plug for DJI HD system, 3rd generation IMU ICM42688-P, dual plug-and-play 4in1 ESC ports, 12x PWM outputs, barometer, OSD, 6x UARTs, 9-16V BEC, dual analog camera inputs, easy soldering layout, and so much more!\n\u003c\/p\u003e\n\u003cp\u003e\n The LUX F4 builds on all the best features of its predecessors and further improves on hardware components and layout. You get an incredible 6x dedicated UART ports along with an onboard memory for black-box data logging. In addition, the LUX F4 can connect up to 12 PWM signals at once! That means it can easily support an Octo-copter, X8, or something even more creative with up to 12 PWM outputs. Eight of these outputs are plug-and-play ready with dual 4in1 ESC connectors right on the flight controller. Dual 4in1 ESC stacks + FC is super simple and clean now with the plug and play configuration.\n\u003c\/p\u003e\n\u003cp\u003e\n The integrated BetaFlight OSD makes it super simple to display important information on your FPV display like battery voltage, flight time, warnings, RSSI, smart audio features and more. Going digital instead? No problem, simply output the OSD data via an open UART on the plug and play harness for DJI FPV Air Unit.\n\u003c\/p\u003e\n\u003cp\u003e\n The features don't stop there! The LUX F4 has the ability to run 2 analog camera signals, with a built switching ability. This means you can run 2 cameras simultaneously and assign a switch via the PINIO feature in Betaflight to alternate between the 2 feeds at the flip of a switch. Installing a front and rear camera has never been easier!\n\u003c\/p\u003e\n\u003cp\u003e\n Have you ever been in an FPV race where you need to plug in your quad, but you don't want to broadcast an FPV signal to knock your friends out of the air? Or how about you crash, and need to save your VTX from burning up while baking in the hot sun. With the LUX F4 you can remotely turn your VTX on or off via a switch on your radio! The LUX features an on-board 3A 9-16V regulated power pad designed to power your video transmitter (Like DJI FPV Air Unit). Using the PINIO resource, you can assign this pad to a switch on your radio, remotely controlling the power source to your video transmitter.\n\u003c\/p\u003e\n\u003cp\u003e\n Long range quad and FPV plane pilots will also love the Lumenier LUX F4 . It has all the features you need to take full advantage of the long range and autonomous flight technology. The LUX F4 has an on-board barometer, buzzer pad, I2C pad, Ardupilot support, iNAV support, GPS\/compass pads, and up to 12 PWM inputs for a ton of servo and motor control.\n\u003c\/p\u003e\n\u003cp\u003e\n The Lumenier LUX F4 Ultimate is a very low profile board allowing it to be mounted in a variety of ways. Signal wires can be soldered directly to the break-out pads to save on size and weight or use the included plug and play cables. The LUX supports PPM or Serial RX (including FrSky, S.BUS, DSMX, etc.).\n\u003c\/p\u003e\n\u003cdiv data-appearance=\"contained\" data-content-type=\"row\" data-element=\"main\"\u003e\n \u003cdiv data-background-images=\"{}\" data-background-type=\"image\" data-element=\"inner\" data-enable-parallax=\"0\" data-parallax-speed=\"0.5\" data-pb-style=\"JYT2TNA\" data-video-fallback-src=\"\" data-video-lazy-load=\"true\" data-video-loop=\"true\" data-video-play-only-visible=\"true\"\u003e\n \u003ch2 data-appearance=\"default\" data-content-type=\"heading\" data-element=\"main\"\u003e\n Features\n \u003c\/h2\u003e\n \u003cdiv data-appearance=\"default\" data-content-type=\"text\" data-element=\"main\"\u003e\n \u003cul\u003e\n \u003cli\u003e\n STM32F405 has 1MB flash which can run ArduPilot\/INAV\/BetaFlight\n \u003c\/li\u003e\n \u003cli\u003e\n InvenSense the 3rd generation IMU ICM42688-P\n \u003c\/li\u003e\n \u003cli\u003e\n 9-60V(3~12S LiPo) wide input voltage and voltage sense. and a 9~16V BEC for DJI OSD or analog VTX.\n \u003c\/li\u003e\n \u003cli\u003e\n 8motors+3servos in INAV\/BF multirotor mixer.\n \u003c\/li\u003e\n \u003cli\u003e\n 2x SH1.0_8pin connector for PnP with 2x 4in1 ESC\n \u003c\/li\u003e\n \u003cli\u003e\n 1x SH1.0_6pin connector for PnP with HD System(Caddx Vista \u0026amp; Air Unit)\n \u003c\/li\u003e\n \u003cli\u003e\n USB pin breakout for connecting to external USB adapter.\n \u003c\/li\u003e\n \u003c\/ul\u003e\n \u003c\/div\u003e\n \u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv data-appearance=\"contained\" data-content-type=\"row\" data-element=\"main\"\u003e\n \u003cdiv data-background-images=\"{}\" data-background-type=\"image\" data-element=\"inner\" data-enable-parallax=\"0\" data-parallax-speed=\"0.5\" data-pb-style=\"S9OVTO9\" data-video-fallback-src=\"\" data-video-lazy-load=\"true\" data-video-loop=\"true\" data-video-play-only-visible=\"true\"\u003e\n \u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv data-appearance=\"contained\" data-content-type=\"row\" data-element=\"main\"\u003e\n \u003cdiv data-background-images=\"{}\" data-background-type=\"image\" data-element=\"inner\" data-enable-parallax=\"0\" data-parallax-speed=\"0.5\" data-pb-style=\"CTGBI3G\" data-video-fallback-src=\"\" data-video-lazy-load=\"true\" data-video-loop=\"true\" data-video-play-only-visible=\"true\"\u003e\n \u003ch2 data-appearance=\"default\" data-content-type=\"heading\" data-element=\"main\"\u003e\n Specifications\n \u003c\/h2\u003e\n \u003cdiv data-appearance=\"default\" data-content-type=\"text\" data-element=\"main\"\u003e\n \u003cul\u003e\n \u003cli\u003e\n MCU: STM32F405RGT6\n \u003c\/li\u003e\n \u003cli\u003e\n IMU: ICM42688-P\n \u003c\/li\u003e\n \u003cli\u003e\n OSD: AT7456E, DJI OSD\n \u003c\/li\u003e\n \u003cli\u003e\n Baro: SPL06-001 (I2C)\n \u003c\/li\u003e\n \u003cli\u003e\n Blackbox: 16M-byte Flash memory\n \u003c\/li\u003e\n \u003cli\u003e\n 6x UARTs, 1x Softserial_Tx option\n \u003c\/li\u003e\n \u003cli\u003e\n 12x PWM outputs (8x Dshot)\n \u003c\/li\u003e\n \u003cli\u003e\n 1x I2C\n \u003c\/li\u003e\n \u003cli\u003e\n 4x ADC (VBAT, Current, RSSI, Airspeed)\n \u003c\/li\u003e\n \u003cli\u003e\n 2x PINIO\n \u003c\/li\u003e\n \u003cli\u003e\n 2x SH1.0_8pin connector for 4in1 ESC\n \u003c\/li\u003e\n \u003cli\u003e\n 1x SH1.0_6pin connector for HD System(Caddx Vista \u0026amp; Air Unit)\n \u003c\/li\u003e\n \u003cli\u003e\n 3x LEDs for FC STATUS (Blue, Green) and 3.3V indicator(Red)\n \u003c\/li\u003e\n \u003c\/ul\u003e\n \u003ch2\u003e\n Power\n \u003c\/h2\u003e\n \u003cul\u003e\n \u003cli\u003e\n Input: 9~60V (3~12S LiPo)\n \u003c\/li\u003e\n \u003cli\u003e\n BEC: 5V 1.5A\n \u003c\/li\u003e\n \u003cli\u003e\n BEC: Vx, 9~16V\/1~2A (3S IN\/9V 2A, 4S IN\/12V 2A, 6S IN\/16V 2A, 8S IN\/16V 1.5A, 12S IN\/16V 1A)\n \u003c\/li\u003e\n \u003cli\u003e\n Battery Voltage Sensor: 1K:20K (INAV scale 2100, BF scale 210)\n \u003c\/li\u003e\n \u003cli\u003e\n No Current Sensor built-in, supports external current sensor of PDB\/4in1\n \u003c\/li\u003e\n \u003c\/ul\u003e\n \u003ch2\u003e\n Firmware\n \u003c\/h2\u003e\n \u003cul\u003e\n \u003cli\u003e\n INAV: MATEKF405TE (Pre-loaded by default)\n \u003cul\u003e\n \u003cli\u003e\n \u003cem\u003e\n With INAV firmware, DSHOT can not work on S3, S5,S7 because of DMA clash, use ONESHOT or MULTISHOT and calibrate ESC PWM range.\n \u003c\/em\u003e\n \u003c\/li\u003e\n \u003c\/ul\u003e\n \u003c\/li\u003e\n \u003cli\u003e\n BetaFlight: MATEKF405TE\n \u003c\/li\u003e\n \u003cli\u003e\n ArduPilot: MatekF405-TE\n \u003c\/li\u003e\n \u003c\/ul\u003e\n \u003ch2\u003e\n Physical\n \u003c\/h2\u003e\n \u003cul\u003e\n \u003cli\u003e\n Mounting: 30.5 x 30.5mm, Φ4mm with Grommets Φ3mm\n \u003c\/li\u003e\n \u003cli\u003e\n Dimensions: 36 x 36 x 5 mm (9mm max height including regulator board)\n \u003c\/li\u003e\n \u003cli\u003e\n Weight: 8.5g\n \u003c\/li\u003e\n \u003c\/ul\u003e\n \u003ch2 data-appearance=\"default\" data-content-type=\"heading\" data-element=\"main\"\u003e\n Download Links\n \u003c\/h2\u003e\n \u003cdiv data-appearance=\"default\" data-content-type=\"text\" data-element=\"main\"\u003e\n \u003cul\u003e\n \u003cli\u003e\n \u003cstrong\u003e\n Manual:\n \u003c\/strong\u003e\n \u003cul\u003e\n \u003cli\u003e\n \u003ca href=\"https:\/\/getfpv-media.s3.amazonaws.com\/wysiwyg\/files\/Lumenier_LUX-F4HD_Manual_web.pdf\" rel=\"noopener\" tabindex=\"0\" target=\"_blank\"\u003e\n Download the LUX F4 Ultimate Flight Controller User Manual\n \u003c\/a\u003e\n \u003c\/li\u003e\n \u003c\/ul\u003e\n \u003c\/li\u003e\n \u003cli\u003e\n \u003cstrong\u003e\n Firmware:\n \u003c\/strong\u003e\n \u003cul\u003e\n \u003cli\u003e\n \u003cstrong\u003e\n INAV\n \u003c\/strong\u003e\n : MATEKF405TE -\n \u003ca href=\"https:\/\/github.com\/iNavFlight\/inav-configurator\/releases\" rel=\"noopener\" tabindex=\"0\" target=\"_blank\"\u003e\n Download iNav Configurator\n \u003c\/a\u003e\n -\n \u003ca href=\"https:\/\/github.com\/iNavFlight\/inav\/releases\" rel=\"noopener\" tabindex=\"0\" target=\"_blank\"\u003e\n Latest iNav Firmware\n \u003c\/a\u003e\n \u003c\/li\u003e\n \u003cli\u003e\n \u003cstrong\u003e\n BetaFlight\n \u003c\/strong\u003e\n : MATEKF405TE -\n \u003ca href=\"https:\/\/github.com\/betaflight\/betaflight-configurator\/releases\" rel=\"noopener\" tabindex=\"0\" target=\"_blank\"\u003e\n Download Betaflight Configurator\n \u003c\/a\u003e\n -\n \u003ca href=\"https:\/\/github.com\/betaflight\/betaflight\/releases\" rel=\"noopener\" tabindex=\"0\" target=\"_blank\"\u003e\n Latest Betaflight Firmware\n \u003c\/a\u003e\n \u003c\/li\u003e\n \u003cli\u003e\n \u003cstrong\u003e\n ArduPilot:\n \u003c\/strong\u003e\n MatekF405-TE -\n \u003ca href=\"https:\/\/ardupilot.org\/copter\/docs\/initial-setup.html\" rel=\"noopener\" tabindex=\"0\" target=\"_blank\"\u003e\n Download ArduPilot Configurator\n \u003c\/a\u003e\n -\n \u003ca href=\"https:\/\/ardupilot.org\/copter\/docs\/common-loading-firmware-onto-chibios-only-boards.html\" rel=\"noopener\" tabindex=\"0\" target=\"_blank\"\u003e\n Latest ArduPilot Firmware\n \u003c\/a\u003e\n \u003c\/li\u003e\n \u003c\/ul\u003e\n \u003c\/li\u003e\n \u003c\/ul\u003e\n \u003c\/div\u003e\n \u003ch2 data-appearance=\"default\" data-content-type=\"heading\" data-element=\"main\"\u003e\n Includes\n \u003c\/h2\u003e\n \u003cdiv data-appearance=\"default\" data-content-type=\"text\" data-element=\"main\"\u003e\n \u003cul\u003e\n \u003cli\u003e\n 1x Lumenier LUX F4 HD Ultimate Flight Controller\n \u003c\/li\u003e\n \u003cli\u003e\n 1x Connecting Wire Set\n \u003c\/li\u003e\n \u003c\/ul\u003e\n \u003c\/div\u003e\n \u003c\/div\u003e\n \u003c\/div\u003e\n\u003c\/div\u003e\n","brand":"Lumenier","offers":[{"title":"Default Title","offer_id":56578248278397,"sku":"GFPV-18131","price":65.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/lumenier-lux-f4-hd-ultimate-flight-controller.jpg?v=1753831251"},{"product_id":"matek-f405-hdte-flight-controller","title":"Matek F405-HDTE Flight Controller","description":"\u003ch2\u003e\n Features\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n STM32F405 has 1MB flash which can run ArduPilot\/INAV\/BetaFlight\n \u003c\/li\u003e\n \u003cli\u003e\n InvenSense the 3rd generation IMU ICM42688-P\n \u003c\/li\u003e\n \u003cli\u003e\n 9-60V(3~12S LiPo) wide input voltage and voltage sense. and a 9~16V BEC for DJI OSD or analog VTX.\n \u003c\/li\u003e\n \u003cli\u003e\n 8motors+3servos in INAV\/BF multirotor mixer.\n \u003c\/li\u003e\n \u003cli\u003e\n 2x SH1.0_8pin connector for PnP with 2x 4in1 ESC\n \u003c\/li\u003e\n \u003cli\u003e\n 1x SH1.0_6pin connector for PnP with HD System(Caddx Vista \u0026amp; Air Unit)\n \u003c\/li\u003e\n \u003cli\u003e\n USB pin breakout for connecting to external USB adapter.\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n \u003cimg alt=\"\" class=\"alignnone size-medium wp-image-605262\" height=\"600\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/F405-HDTE_1_a1cabae0-e134-45b0-91be-96c5b5550b27.jpg?v=1754234955\" width=\"1500\"\u003e\n\u003c\/p\u003e\n\u003cp\u003e\n \u003cimg alt=\"\" class=\"alignnone size-full wp-image-605256\" height=\"2155\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/F405-HDTE_L_667c26d7-ad26-466c-99c4-2386202aa2dd.jpg?v=1754234959\" width=\"1500\"\u003e\n\u003c\/p\u003e\n\u003ch2\u003e\n Specifications\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n MCU: STM32F405RGT6\n \u003c\/li\u003e\n \u003cli\u003e\n IMU: ICM42688-P\n \u003c\/li\u003e\n \u003cli\u003e\n OSD: AT7456E, DJI OSD\n \u003c\/li\u003e\n \u003cli\u003e\n Baro: SPL06-001 (I2C)\n \u003c\/li\u003e\n \u003cli\u003e\n Blackbox: 16M-byte Flash memory\n \u003c\/li\u003e\n \u003cli\u003e\n 6x UARTs, 1x Softserial_Tx option\n \u003c\/li\u003e\n \u003cli\u003e\n 12x PWM outputs (8x Dshot)\n \u003c\/li\u003e\n \u003cli\u003e\n 1x I2C\n \u003c\/li\u003e\n \u003cli\u003e\n 4x ADC (VBAT, Current, RSSI, Airspeed)\n \u003c\/li\u003e\n \u003cli\u003e\n 2x PINIO\n \u003c\/li\u003e\n \u003cli\u003e\n 2x SH1.0_8pin connector for 4in1 ESC\n \u003c\/li\u003e\n \u003cli\u003e\n 1x SH1.0_6pin connector for HD System(Caddx Vista \u0026amp; Air Unit)\n \u003c\/li\u003e\n \u003cli\u003e\n 3x LEDs for FC STATUS (Blue, Green) and 3.3V indicator(Red)\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n \u003cli\u003e\n 9~16V(Vxs) output ON\/OFF switchable\n \u003c\/li\u003e\n \u003cli\u003e\n Dual analog camera signal switchable\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n Power\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n Input: 9~60V (3~12S LiPo)\n \u003c\/li\u003e\n \u003cli\u003e\n BEC: 5V 1.5A\n \u003c\/li\u003e\n \u003cli\u003e\n BEC: Vx, 9~16V\/1~2A (3S IN\/9V 2A, 4S IN\/12V 2A, 6S IN\/16V 2A, 8S IN\/16V 1.5A, 12S IN\/16V 1A)\n \u003c\/li\u003e\n \u003cli\u003e\n Battery Voltage Sensor: 1K:20K (INAV scale 2100, BF scale 210)\n \u003c\/li\u003e\n \u003cli\u003e\n No Current Sensor built-in, supports external current sensor of PDB\/4in1\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n Firmware\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n ArduPilot: MatekF405-TE\n \u003c\/li\u003e\n \u003cli\u003e\n INAV: MATEKF405TE\n \u003c\/li\u003e\n \u003cli\u003e\n BetaFlight: MATEKF405TE\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n Physical\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n Mounting: 30.5 x 30.5mm, Φ4mm with Grommets Φ3mm\n \u003c\/li\u003e\n \u003cli\u003e\n Dimensions: 36 x 36 x 5 mm\n \u003c\/li\u003e\n \u003cli\u003e\n Weight: 7g\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n Included\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n 1x FC F405-HDTE\n \u003c\/li\u003e\n \u003cli\u003e\n 6x Silicon grommets M4 to M3\n \u003c\/li\u003e\n \u003cli\u003e\n 1x SH1.0_8pin cable 5cm, 2x SH1.0_8pin connectors\n \u003c\/li\u003e\n \u003cli\u003e\n 1x SH1.0_6pin to GH1.25_8pin cable 8cm for HD System(Caddx Vista \u0026amp; Air Unit)\n \u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"Matek Systems","offers":[{"title":"Default Title","offer_id":56578258272637,"sku":"M-F405-HDTE","price":44.29,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/F405-HDTE_front.jpg?v=1753831321"},{"product_id":"t-motor-f7-hd-flight-controller","title":"T-Motor F7 HD Flight Controller","description":"\u003cp\u003e\n The HD version of the T-Motor F7 Flight Controller is specially designed to work directly with the DJI HD FPV System without soldering. Plug-and-play with the DJI HD System has never been easier!\n\u003c\/p\u003e\n\u003ch2\u003e\n Specifications\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n Brand name: T-motor\n \u003c\/li\u003e\n \u003cli\u003e\n Item name: F7 HD Flight Controller\n \u003c\/li\u003e\n \u003cli\u003e\n MCU: STMF722RET6\n \u003c\/li\u003e\n \u003cli\u003e\n Gyro: MPU6000\/BMI270 depending on supply\n \u003c\/li\u003e\n \u003cli\u003e\n RAM: on board 16Mb\n \u003c\/li\u003e\n \u003cli\u003e\n Input Voltage: 12V-25-2V (3-6S)\n \u003c\/li\u003e\n \u003cli\u003e\n BEC: 5V\/2A(Receiver), 10V\/2A(VTX)\n \u003c\/li\u003e\n \u003cli\u003e\n Dimensions: 37mm x 37mm\n \u003c\/li\u003e\n \u003cli\u003e\n Mounting Holes: 30.5mm x 30.5mm\n \u003c\/li\u003e\n \u003cli\u003e\n Firmware Target: TMOTORF7 (Betaflight)\n \u003c\/li\u003e\n \u003cli\u003e\n Weight: 8.4g\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n Includes\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n 1 x T-Motor F7 HD Flight Controller\n \u003c\/li\u003e\n \u003cli\u003e\n 2 x FC to ESC Cable\n \u003c\/li\u003e\n \u003cli\u003e\n 4 x Vibration Dampeners\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/F7-HD.jpg?v=1754237157\"\u003e\n \u003cimg alt=\"\" class=\"aligncenter size-full wp-image-337904\" height=\"2200\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/F7-HD.jpg?v=1754237157\" width=\"1200\"\u003e\n \u003c\/a\u003e\n\u003c\/p\u003e\n","brand":"T-Motor","offers":[{"title":"Default Title","offer_id":56578258993533,"sku":"BA1-F47-E9B","price":66.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/t-motor-f7-hd-flight-controller.jpg?v=1753831331"},{"product_id":"matek-h743-wlite-wing-flight-controller","title":"Matek H743-WLITE Wing Flight Controller","description":"\u003cp\u003e\n \u003cimg alt=\"\" class=\"alignnone size-full wp-image-607168\" height=\"600\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/H743-WLITE_1_473cd8f1-bd9b-4377-b1d0-800bfa55da7b.jpg?v=1754235009\" width=\"1500\"\u003e\n\u003c\/p\u003e\n\u003ch2\u003e\n FC Specifications\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n MCU: STM32H743VIH6, 480MHz , 512KB RAM, 2MB Flash\n \u003c\/li\u003e\n \u003cli\u003e\n IMU: ICM42688-P\n \u003c\/li\u003e\n \u003cli\u003e\n Baro: DPS310 (I2C2)\n \u003c\/li\u003e\n \u003cli\u003e\n OSD: AT7456E\n \u003c\/li\u003e\n \u003cli\u003e\n Blackbox: MicroSD card slot (SDIO)\n \u003c\/li\u003e\n \u003cli\u003e\n 7x Uarts (1,2,3,4,6,7,8) with built-in inversion.\n \u003c\/li\u003e\n \u003cli\u003e\n 13x PWM outputs(12+LED)\n \u003c\/li\u003e\n \u003cli\u003e\n 6x ADC (VBAT, Current, RSSI, Analog AirSpeed, VB2, CU2)\n \u003c\/li\u003e\n \u003cli\u003e\n 3x LEDs for FC STATUS (Blue, Red) and 3.3V indicator(Red)\n \u003c\/li\u003e\n \u003cli\u003e\n 2x I2C\n \u003c\/li\u003e\n \u003cli\u003e\n 1x CAN\n \u003c\/li\u003e\n \u003cli\u003e\n USB\/Beep Extender with Type-C(USB2.0)\n \u003c\/li\u003e\n \u003cli\u003e\n Dual Camera Inputs switch\n \u003c\/li\u003e\n \u003cli\u003e\n 9V(12V) for VTX power switch\n \u003c\/li\u003e\n \u003cli\u003e\n High-precision Current Sense, 220A range\n \u003c\/li\u003e\n \u003cli\u003e\n ADC VB2 voltage divider: 1K:20K\n \u003c\/li\u003e\n \u003cli\u003e\n ADC AirSpeed voltage divider: 20K:20K\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n \u003cstrong\u003e\n FC Firmware\n \u003c\/strong\u003e\n\u003c\/p\u003e\n\u003cul\u003e\n \u003cli\u003e\n INAV: MATEKH743\n \u003c\/li\u003e\n \u003cli\u003e\n ArduPilot: MATEKH743\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n \u003cstrong\u003e\n PDB\n \u003c\/strong\u003e\n\u003c\/p\u003e\n\u003cul\u003e\n \u003cli\u003e\n Input voltage range: 6.8~30V (2~6S LiPo)\n \u003c\/li\u003e\n \u003cli\u003e\n 1x ESC power pads\n \u003c\/li\u003e\n \u003cli\u003e\n Battery Voltage divider 1K:20K (Scale 2100 in INAV, BATT_VOLT_MULT 21.0 in ArduPilot)\n \u003c\/li\u003e\n \u003cli\u003e\n Current Senor: 220A, 3.3V ADC (Scale 150 in INAV, 66.7 A\/V in ArduPilot)\n \u003c\/li\u003e\n \u003cli\u003e\n Sense resistor: 90A continuous, 220A peak\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n \u003cstrong\u003e\n BEC 5V output\n \u003c\/strong\u003e\n\u003c\/p\u003e\n\u003cul\u003e\n \u003cli\u003e\n Designed for Flight controller, Receiver, OSD, Camera, Buzzer, 2812 LED_Strip, Buzzer, GPS module, AirSpeed\n \u003c\/li\u003e\n \u003cli\u003e\n Continuous current: 2 Amps, Max.3A\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n \u003cstrong\u003e\n BEC 9V \/12V output\n \u003c\/strong\u003e\n\u003c\/p\u003e\n\u003cul\u003e\n \u003cli\u003e\n Designed for Video Transmitter, Camera, Gimbal ect.\n \u003c\/li\u003e\n \u003cli\u003e\n Continuous current: 2 Amps, Max.3A\n \u003c\/li\u003e\n \u003cli\u003e\n 12V option with Jumper pad\n \u003c\/li\u003e\n \u003cli\u003e\n for stable 9V\/12V output, input voltage should \u0026gt; output voltage +1V\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n \u003cstrong\u003e\n BEC Vx output\n \u003c\/strong\u003e\n\u003c\/p\u003e\n\u003cul\u003e\n \u003cli\u003e\n Designed for Servos\n \u003c\/li\u003e\n \u003cli\u003e\n Voltage adjustable, 5V Default, 6V or 7.2V via jumper\n \u003c\/li\u003e\n \u003cli\u003e\n Continuous current: 8 Amps, Max.10A\n \u003c\/li\u003e\n \u003cli\u003e\n for stable Vx output, input voltage should \u0026gt; Vx voltage +1V\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n \u003cstrong\u003e\n BEC 3.3V output\n \u003c\/strong\u003e\n\u003c\/p\u003e\n\u003cul\u003e\n \u003cli\u003e\n Designed for Baro \/ Compass module and external 3.3V peripherals\n \u003c\/li\u003e\n \u003cli\u003e\n Linear Regulator\n \u003c\/li\u003e\n \u003cli\u003e\n Continuous current: 200mA\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n \u003cstrong\u003e\n Physical\n \u003c\/strong\u003e\n\u003c\/p\u003e\n\u003cul\u003e\n \u003cli\u003e\n Mounting: 25 x 25mm, Φ2mm\n \u003c\/li\u003e\n \u003cli\u003e\n Dimensions: 44 x 29 x 14.5 mm\n \u003c\/li\u003e\n \u003cli\u003e\n Weight: 22g w\/ USB\/buzzer adapter\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n Layout\n\u003c\/h2\u003e\n\u003cp\u003e\n \u003cimg alt=\"\" class=\"alignnone size-full wp-image-607171\" height=\"1819\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/H743-WLITE-layout_9b686389-aab4-4ca1-a2e1-b279d4cd29e8.jpg?v=1754235013\" width=\"1500\"\u003e\n\u003c\/p\u003e\n\u003ch2\u003e\n Included\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n 1x H743-WLITE\n \u003c\/li\u003e\n \u003cli\u003e\n 1x USB(Type-C)\/Beep (Passive buzzer) Extender\n \u003c\/li\u003e\n \u003cli\u003e\n 1x 20cm JST-SH-6P to JST-SH-6P cable for USB extender.\n \u003c\/li\u003e\n \u003cli\u003e\n 2x 20cm JST-GH-4P to JST-GH-4P cable for CAN \u0026amp; I2C port\n \u003c\/li\u003e\n \u003cli\u003e\n 1x Rubycon ZLH 35V 470uF capacitor\n \u003c\/li\u003e\n \u003cli\u003e\n Dupont 2.54 pins\n \u003cstrong\u003e\n (Board is shipped unsoldered)\n \u003c\/strong\u003e\n \u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"Matek Systems","offers":[{"title":"Default Title","offer_id":56578259583357,"sku":"M-H743-WLITE","price":79.89,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/H743-WLITE-main.webp?v=1753831337"},{"product_id":"matek-f405-wte-elrs-wing-flight-controller","title":"Matek F405-WTE ELRS Wing Flight Controller","description":"\u003cp\u003e\n \u003cimg alt=\"\" class=\"alignnone size-full wp-image-607249\" height=\"600\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/F405-WTE_1_a7155aff-3e71-4bc4-add3-492b5ff09402.jpg?v=1754234991\" width=\"1500\"\u003e\n\u003c\/p\u003e\n\u003cp\u003e\n \u003cstrong\u003e\n FC Specifications\n \u003c\/strong\u003e\n\u003c\/p\u003e\n\u003cul\u003e\n \u003cli\u003e\n MCU: STM32F405RGT6, 168MHz , 1MB Flash\n \u003c\/li\u003e\n \u003cli\u003e\n IMU: ICM42688-P\n \u003c\/li\u003e\n \u003cli\u003e\n Baro: SPL06-001\n \u003c\/li\u003e\n \u003cli\u003e\n OSD: AT7456E\n \u003c\/li\u003e\n \u003cli\u003e\n Blackbox: MicroSD card slot\n \u003c\/li\u003e\n \u003cli\u003e\n ESP WiFi Telemetry(MAVLink, 14dBm)\n \u003c\/li\u003e\n \u003cli\u003e\n ExpressLRS 2.4G receiver(CRSF protocol, Telemetry 12dBm)\n \u003c\/li\u003e\n \u003cli\u003e\n 6x UARTs, 1x Softserial_Tx option(INAV)\n \u003c\/li\u003e\n \u003cli\u003e\n 12x PWM outputs\n \u003c\/li\u003e\n \u003cli\u003e\n 1x I2C\n \u003c\/li\u003e\n \u003cli\u003e\n 4x ADC (VBAT, Current, RSSI, Airspeed)\n \u003c\/li\u003e\n \u003cli\u003e\n USB\/Beep Extender with Type-C(USB2.0)\n \u003c\/li\u003e\n \u003cli\u003e\n Dual Camera Inputs switch\n \u003c\/li\u003e\n \u003cli\u003e\n 9V(12V) for VTX power switch\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n \u003cstrong\u003e\n FC Firmware\n \u003c\/strong\u003e\n\u003c\/p\u003e\n\u003cul\u003e\n \u003cli\u003e\n ArduPilot: MatekF405-TE\n \u003c\/li\u003e\n \u003cli\u003e\n INAV: MATEKF405TE_SD (not available in INAV configurator 4.x)\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n \u003cstrong\u003e\n PDB\n \u003c\/strong\u003e\n\u003c\/p\u003e\n\u003cul\u003e\n \u003cli\u003e\n Input voltage range: 6.8~30V (2~6S LiPo)\n \u003c\/li\u003e\n \u003cli\u003e\n 1x ESC power pads\n \u003c\/li\u003e\n \u003cli\u003e\n Battery Voltage divider 1K:20K (Scale 2100 in INAV, BATT_VOLT_MULT 21.0 in ArduPilot)\n \u003c\/li\u003e\n \u003cli\u003e\n Current Senor: 220A, 3.3V ADC (Scale 150 in INAV, 66.7 A\/V in ArduPilot)\n \u003c\/li\u003e\n \u003cli\u003e\n Sense resistor: 90A continuous, 220A peak\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n \u003cstrong\u003e\n BEC 5V output\n \u003c\/strong\u003e\n\u003c\/p\u003e\n\u003cul\u003e\n \u003cli\u003e\n Designed for Flight controller, Receiver, OSD, Camera, Buzzer, 2812 LED_Strip, Buzzer, GPS module, AirSpeed\n \u003c\/li\u003e\n \u003cli\u003e\n Continuous current: 2 Amps, Max.3A\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n \u003cstrong\u003e\n BEC 9V \/12V output\n \u003c\/strong\u003e\n\u003c\/p\u003e\n\u003cul\u003e\n \u003cli\u003e\n Designed for Video Transmitter, Camera, Gimbal ect.\n \u003c\/li\u003e\n \u003cli\u003e\n Continuous current: 2 Amps, Max.3A\n \u003c\/li\u003e\n \u003cli\u003e\n 12V option with Jumper pad\n \u003c\/li\u003e\n \u003cli\u003e\n for stable 9V\/12V output, input voltage should \u0026gt; output voltage +1V\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n \u003cstrong\u003e\n BEC Vx output\n \u003c\/strong\u003e\n\u003c\/p\u003e\n\u003cul\u003e\n \u003cli\u003e\n Designed for Servos\n \u003c\/li\u003e\n \u003cli\u003e\n Voltage adjustable, 5V Default, 6V or 7.2V via jumper\n \u003c\/li\u003e\n \u003cli\u003e\n Continuous current: 8 Amps, Max.10A\n \u003c\/li\u003e\n \u003cli\u003e\n for stable Vx output, input voltage should \u0026gt; Vx voltage +1V\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n \u003cstrong\u003e\n BEC 3.3V output\n \u003c\/strong\u003e\n\u003c\/p\u003e\n\u003cul\u003e\n \u003cli\u003e\n Designed for Baro \/ Compass module and external 3.3V peripherals\n \u003c\/li\u003e\n \u003cli\u003e\n Linear Regulator\n \u003c\/li\u003e\n \u003cli\u003e\n Continuous current: 200mA\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n \u003cstrong\u003e\n Physical\n \u003c\/strong\u003e\n\u003c\/p\u003e\n\u003cul\u003e\n \u003cli\u003e\n Mounting: 25 x 25mm, Φ2mm\n \u003c\/li\u003e\n \u003cli\u003e\n Dimensions: 44 x 29 x 12.7mm\n \u003c\/li\u003e\n \u003cli\u003e\n Weight: 22g w\/ USB\/buzzer adapter\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n Layout\n\u003c\/h2\u003e\n\u003cp\u003e\n \u003cimg alt=\"\" class=\"alignnone size-full wp-image-607255\" height=\"1784\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/F405-WTE_layout_de4745a6-5166-4523-9092-38ed68981b65.jpg?v=1754234994\" width=\"1500\"\u003e\n\u003c\/p\u003e\n\u003ch2\u003e\n Included\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n 1x F405-WTE\n \u003c\/li\u003e\n \u003cli\u003e\n 1x USB(Type-C)\/Beep (Passive buzzer) Extender + 20cm JST-SH-6P to JST-SH-6P cable for USB extender.\n \u003c\/li\u003e\n \u003cli\u003e\n 2x IPEX-MHF1 2.4G Antennas\n \u003c\/li\u003e\n \u003cli\u003e\n 1x Rubycon ZLH 35V 470uF capacitor\n \u003c\/li\u003e\n \u003cli\u003e\n Dupont 2.54 pins\n \u003cstrong\u003e\n (Board is shipped unsoldered)\n \u003c\/strong\u003e\n \u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"Matek Systems","offers":[{"title":"Default Title","offer_id":56578260402557,"sku":"M-F405-WTE","price":56.39,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/F405-WTE-main.jpg?v=1753831352"},{"product_id":"matek-f405-minite-betaflight-flight-controller","title":"Matek F405-MiniTE BetaFlight Flight Controller","description":"\u003cp\u003e\n \u003cimg alt=\"\" class=\"alignnone size-full wp-image-568026\" height=\"600\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/F405-miniTE_1_b1ec9190-014e-472a-a7e6-fa11f1b25f92.jpg?v=1754234977\" width=\"1500\"\u003e\n\u003c\/p\u003e\n\u003ch2\u003e\n Key Features\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n F405 has 1MB flash which can run with ArduPilot. even with INAV firmware, some features will be removed on F722 due to limited flash.\n \u003c\/li\u003e\n \u003cli\u003e\n The advantage of F722 is all UARTs have builtin inversion which is not needed when CRSF protocol is widely used on new receivers.\n \u003c\/li\u003e\n \u003cli\u003e\n Redesigned target MATEKF405TE support 8x bi-directional DSHOT.\n \u003c\/li\u003e\n \u003cli\u003e\n Support DJI air unit PnP, and a 10V BEC for DJI OSD or analog VTX\n \u003c\/li\u003e\n \u003cli\u003e\n Compared with F722-miniSE 8motors or 6motor+2servos, F405-miniTE support 8motors+3servos in INAV\/BF multirotor mixer\n \u003c\/li\u003e\n \u003cli\u003e\n InvenSense GEN3 IMU ICM42605\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n Specifications:\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n MCU: STM32F405RGT6\n \u003c\/li\u003e\n \u003cli\u003e\n IMU: ICM42605\n \u003c\/li\u003e\n \u003cli\u003e\n OSD: AT7456E\n \u003c\/li\u003e\n \u003cli\u003e\n Baro: Goertek SPL06-001 (I2C)\n \u003c\/li\u003e\n \u003cli\u003e\n Blackbox: 16M-byte Flash memory\n \u003c\/li\u003e\n \u003cli\u003e\n 6x UARTs, 1x Softserial_Tx option\n \u003c\/li\u003e\n \u003cli\u003e\n 12x PWM outputs (8x Dshot)\n \u003c\/li\u003e\n \u003cli\u003e\n 1x I2C\n \u003c\/li\u003e\n \u003cli\u003e\n 4x ADC (VBAT, Current, RSSI, Airspeed)\n \u003c\/li\u003e\n \u003cli\u003e\n 2x PINIO\n \u003c\/li\u003e\n \u003cli\u003e\n 1x SH1.0_8pin connector (Vbat\/G\/Curr\/R3\/S1\/S2\/S3\/S4)\n \u003c\/li\u003e\n \u003cli\u003e\n 1x SH1.0_6pin connector for DJI FPV Air Unit\n \u003c\/li\u003e\n \u003cli\u003e\n 3x LEDs for FC STATUS (Blue, Green) and 3.3V indicator(Red)\n \u003c\/li\u003e\n \u003cli\u003e\n Dual BEC, 5V 1.7A \u0026amp; 10V 1.4A\n \u003c\/li\u003e\n \u003cli\u003e\n 10V output ON\/OFF switchable\n \u003c\/li\u003e\n \u003cli\u003e\n Convertible 20mm to 30.5mm mounting\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\n \u003cstrong\u003e\n Power\n \u003c\/strong\u003e\n\u003c\/h4\u003e\n\u003cul\u003e\n \u003cli\u003e\n Input: 6~30V (2~S LiPo)\n \u003c\/li\u003e\n \u003cli\u003e\n BEC: 5V 1.7A, Max.2A\n \u003c\/li\u003e\n \u003cli\u003e\n BEC: 10V 1.4A for VTX or DJI Air Unit\n \u003c\/li\u003e\n \u003cli\u003e\n Battery Voltage Sensor: 1K:20K (INAV scale 2100, BF scale 210)\n \u003c\/li\u003e\n \u003cli\u003e\n No Current Sensor built-in, supports external current sensor of PDB\/4in1\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\n \u003cstrong\u003e\n Firmware\n \u003c\/strong\u003e\n\u003c\/h4\u003e\n\u003cul\u003e\n \u003cli\u003e\n ArduPilot: MatekF405-TE\n \u003c\/li\u003e\n \u003cli\u003e\n INAV: MATEKF405TE\n \u003c\/li\u003e\n \u003cli\u003e\n BetaFlight: MATEKF405TE\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\n \u003cstrong\u003e\n Physical\n \u003c\/strong\u003e\n\u003c\/h4\u003e\n\u003cul\u003e\n \u003cli\u003e\n Mounting\n \u003cul\u003e\n \u003cli\u003e\n 20 x 20mm\/Φ3mm with Silicon Grommets\n \u003c\/li\u003e\n \u003cli\u003e\n 20 x 20mm\/Φ2mm with Silicon \u0026amp; Brass Grommets\n \u003c\/li\u003e\n \u003cli\u003e\n 30.5 x 30.5mm\/Φ3mm with Conversion Plate and Silicon Grommets\n \u003c\/li\u003e\n \u003c\/ul\u003e\n \u003c\/li\u003e\n \u003cli\u003e\n Dimensions: 28 x 28 mm\n \u003c\/li\u003e\n \u003cli\u003e\n Weight: 5g\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n \u003cimg alt=\"\" class=\"alignnone size-full wp-image-568035\" height=\"2004\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/F405-miniTE_layout_b54f5f8e-641e-4401-a4d9-4e0911bdbb6f.jpg?v=1754234981\" width=\"1500\"\u003e\n\u003c\/p\u003e\n\u003ch2\u003e\n Included\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n 1x FC F405-miniTE\n \u003c\/li\u003e\n \u003cli\u003e\n 1x 20mm to 30.5mm conversion plate(blue PCB)\n \u003c\/li\u003e\n \u003cli\u003e\n 6x Silicon grommets M4 to M3\n \u003c\/li\u003e\n \u003cli\u003e\n 6x Brass grommets M3 to M2\n \u003c\/li\u003e\n \u003cli\u003e\n 1x SH1.0_8pin cable 5cm (including 2x 8pin connectors) for 4in1 ESC\n \u003c\/li\u003e\n \u003cli\u003e\n 1x SH1.0_6pin to GH1.25_8pin cable 8cm for DJI Air Unit\n \u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"Matek Systems","offers":[{"title":"Default Title","offer_id":56578267513213,"sku":"101-ABC-AB7","price":50.7,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/F405-miniTE_top.jpg?v=1753831399"},{"product_id":"emax-tinyhawk-iii-aio-flight-controller","title":"Emax Tinyhawk III AIO Flight Controller","description":"\u003cp\u003e\n This is a replacement part all in one flight controller for the Emax tinyhawk III quadcopter.\n\u003c\/p\u003e\n\u003ch2\u003e\n Specifications\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n Brand Name: Emax\n \u003c\/li\u003e\n \u003cli\u003e\n Item Name: F4 OSD Flight Controller AIO\n \u003c\/li\u003e\n \u003cli\u003e\n F4 OSD Flight Controller AIO 25mW VTX \u0026amp; Receiver\n \u003c\/li\u003e\n \u003cli\u003e\n Built-in Receiver: EMAX Tiny RX ( Compatible with Frsky D8 \/ D16)\n \u003c\/li\u003e\n \u003cli\u003e\n Built-in VTX: 37CH 25\/100\/200mw VTX\n \u003c\/li\u003e\n \u003cli\u003e\n Original part for Emax Tinyhawk III FPV Racing Drone\n \u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"Emax","offers":[{"title":"Default Title","offer_id":56578274165117,"sku":"135-B2D-188","price":78.07,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/AIO2.jpg?v=1753831467"},{"product_id":"happymodel-x12-elrs-5in1-aio-flight-controller","title":"Happymodel X12 ELRS 5in1 AIO Flight Controller","description":"\u003cp\u003e\n The world first 5-IN-1 AIO flight controller, OPENVTX(up to 400mw), 12A Brushless Blheli_S ESC and Betaflight OSD coming out recently. It comes with onboard SPI ELRS receiver which support ELRS TX module 2.x firmware, and also provide other receiver option like SPI Frsky receiver which support Frsky D8\/D16 , REDPINE and SFHSS. This is an amazing flight controller for Brushless whoop. You could get unbelievable RX and VTX range by using this flight controller.\n\u003c\/p\u003e\n\u003cp\u003e\n \u003cimg alt=\"\" class=\"alignnone size-full wp-image-622983\" height=\"212\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/X12-Diff.jpg?v=1754233950\" width=\"1000\"\u003e\n\u003c\/p\u003e\n\u003cp\u003e\n \u003cimg alt=\"\" class=\"alignnone size-full wp-image-609095\" height=\"485\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/X12-ELRS-V2-4_765c0884-1cbb-4dbd-b08b-7a4081a2f586.jpg?v=1754233953\" width=\"1000\"\u003e\n\u003c\/p\u003e\n\u003ch2\u003e\n Specification\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n Brand Name: Happymodel\n \u003c\/li\u003e\n \u003cli\u003e\n Item Name: X12 AIO 5-IN-1 Flight controller built-in 12A ESC and OPENVTX\n \u003c\/li\u003e\n \u003cli\u003e\n Betaflight firmware target:\n \u003cul\u003e\n \u003cli\u003e\n ELRS Version: CRAZYBEEF4SX1280\n \u003c\/li\u003e\n \u003c\/ul\u003e\n \u003c\/li\u003e\n \u003cli\u003e\n VTX antenna: U.FL\n \u003c\/li\u003e\n \u003cli\u003e\n Weight: 5.1g\n \u003c\/li\u003e\n \u003cli\u003e\n Support\n \u003cstrong\u003e\n 1-2S\n \u003c\/strong\u003e\n Lipo\/LIHV battery\n \u003c\/li\u003e\n \u003cli\u003e\n Size: 30mm*30mm*8mm\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ctable width=\"785\"\u003e\n \u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd width=\"170\"\u003e\n \u003cstrong\u003e\n Flight controller\n \u003c\/strong\u003e\n \u003c\/td\u003e\n \u003ctd width=\"615\"\u003e\n X12 ELRS V2.0 flight controller built-in ELRS 2.4G receiver Target: CRAZYBEEF4SX1280\n \u003cbr\u003e\n MCU:STM32F411CEU6 (100MHZ, 512K FLASH)\n \u003cbr\u003e\n Sensor: MPU6000 or ICM20689 or BMI270(SPI connection)\n \u003cbr\u003e\n Mount hole size: 25.5mm*25.5mm\n \u003cbr\u003e\n Power supply: 1-2S battery input (DC 2.9V-8.7V)\n \u003cbr\u003e\n Built-in 12A(each) Blheli_S 4in1 ESC\n \u003cbr\u003e\n Built-in Betaflight OSD(SPI Control)\n \u003cbr\u003e\n Built-in 5.8G OpenVTX 0mw~400mw\n \u003cbr\u003e\n Built-in ExpressLRS 2.4G,Frsky D8\/D16\n \u003cbr\u003e\n Built-in voltage meter sensor , voltage meter scale 110Built-in current meter sensor , current meter scale 470\n \u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd width=\"170\"\u003e\n \u003cstrong\u003e\n Onboard 4in1 ESC\n \u003c\/strong\u003e\n \u003c\/td\u003e\n \u003ctd width=\"615\"\u003e\n Power supply: 1-2S LiPo\/LiPo HV\n \u003cbr\u003e\n Current: 12A continuous peak 15A (3 seconds)\n \u003cbr\u003e\n Support BLHeliSuite programmable\n \u003cbr\u003e\n Factory firmware: Z_H_30_REV16_7.HEX\n \u003cbr\u003e\n Default protocol: DSHOT300\n \u003cbr\u003e\n Support Bluejay firmware\n \u003cbr\u003e\n When use Blujay firmware with 48khz, should set startup power to 1100\/1200\n \u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd width=\"170\"\u003e\n \u003cstrong\u003e\n Onboard SPI ExpressLRS 2.4GHz Receiver\n \u003c\/strong\u003e\n \u003c\/td\u003e\n \u003ctd width=\"615\"\u003e\n Packet Rate option: 50Hz\/150Hz\/250Hz\/500Hz\n \u003cp\u003e\n ExpressLRS Firmware version: V2.0\n \u003cbr\u003e\n RF Frequency: 2.4GHz\n \u003cbr\u003e\n Antenna : SMD antenna\n \u003cbr\u003e\n Telemetry output Power: \u0026lt;12dBm\n \u003cbr\u003e\n Receiver protocol: SPI ExpressLRS\n \u003cbr\u003e\n Compatible with ExpressLRS V2.0 TX Module\n \u003cbr\u003e\n Couldn't flash separately ExpressLRS firmware\n \u003c\/p\u003e\n \u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd width=\"170\"\u003e\n \u003cstrong\u003e\n Onboard Frsky SPI D8\/D16 receiver Version\n \u003c\/strong\u003e\n \u003c\/td\u003e\n \u003ctd width=\"615\"\u003e\n SPI BUS receiver\n \u003cbr\u003e\n CC2500 RF\n \u003cbr\u003e\n Compatible Non EU transmitter D8 model Channels: 8ch\n \u003cbr\u003e\n No ground interference ( Transmitter and receiver 1 m from the ground): 200meterFailsafe support\n \u003cbr\u003e\n Support Frsky D8\/ D16 , Redpine , SFHSS\n \u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd width=\"170\"\u003e\n \u003cstrong\u003e\n Onboard 5.8g OPENVTX\n \u003c\/strong\u003e\n \u003c\/td\u003e\n \u003ctd width=\"615\"\u003e\n Firmware version: OPENVTX\n \u003cbr\u003e\n Smartaudio v2.1\n \u003cbr\u003e\n PIT Mode support\n \u003cbr\u003e\n RCE Mode support\n \u003cbr\u003e\n Channels:48ch\n \u003cbr\u003e\n Transmitting Power: 0\/RCE\/25mw\/100mw\/400mw\n \u003cbr\u003e\n Power supply: DC 5V\n \u003cbr\u003e\n Current (5v): \u0026lt;650ma (400mw)\n \u003cbr\u003e\n Antenna connector: U.FL\n \u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\n\u003c\/p\u003e\n\u003ch2\u003e\n Included\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n 1 x ELRS X12 ERLS AIO Flight Controller Board\n \u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"HappyModel","offers":[{"title":"Default Title","offer_id":56578278392189,"sku":"BAB-A69-0BA","price":47.9,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/X12-ELRS-V2-3.jpg?v=1753831482"},{"product_id":"speedybee-bt-nano-3","title":"SpeedyBee BT Nano 3","description":"\u003cp\u003e\n Are you tired of having to physically connect to your betaflight FC and ESC to make configuration changes?\n\u003c\/p\u003e\n\u003cp\u003e\n Introducing the SpeedyBee BT nano 3 - a small board that allows you to wirelessly configure your betaflight FC and ESC using the speedybee app.\n\u003c\/p\u003e\n\u003cp\u003e\n The SpeedyBee BT nano 3 has a number of convenient features, including the ability to automatically turn off Bluetooth to avoid interference when you arm your drone and password protection to prevent malicious changes to your parameters. Plus, it's super tiny and easy to install, making it a hassle-free solution for managing your drone's settings.\n\u003c\/p\u003e\n\u003cp\u003e\n Don't waste any more time fumbling with cables. Add the SpeedyBee BT nano 3 to your cart now and enjoy the convenience of wireless configuration.\n\u003c\/p\u003e\n\u003ch2\u003e\n Features\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n SpeedyBee BT nano 3 is a small board that lets you configure your betaflight FC, ESC wirelessly via the speedybee app.\n \u003c\/li\u003e\n \u003cli\u003e\n Bluetooth automatically turns off to avoid any interference when you arm your drone\n \u003c\/li\u003e\n \u003cli\u003e\n Password protection to avoid any parameters being changes maliciously\n \u003c\/li\u003e\n \u003cli\u003e\n Nano Size, super tiny and easy to install\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n \u003cimg class=\"alignnone size-medium\" height=\"13865\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/Speedybee_20BT_20nano3.jpg?v=1754236612\" width=\"1021\"\u003e\n\u003c\/p\u003e\n\u003ch2\u003e\n Specifications\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n Product Name: SpeedyBee BT Nano 3\n \u003c\/li\u003e\n \u003cli\u003e\n Operating Voltage: 5V\n \u003c\/li\u003e\n \u003cli\u003e\n Working Current: ~10mA\n \u003c\/li\u003e\n \u003cli\u003e\n Bluetooth Low Energy: Supports\n \u003c\/li\u003e\n \u003cli\u003e\n WiFi: Supports (turned on automatically only when upgrading firmware)\n \u003c\/li\u003e\n \u003cli\u003e\n Communication Port: UART\n \u003c\/li\u003e\n \u003cli\u003e\n Baudrate: 115200\n \u003c\/li\u003e\n \u003cli\u003e\n Bluetooth Automatically Turns Off: Enabled by default, module detects armed\/disarmed status of FC and disables Bluetooth during flight to prevent interference\n \u003c\/li\u003e\n \u003cli\u003e\n BT Switch Pad: Disables Bluetooth when receiving Low signal\n \u003c\/li\u003e\n \u003cli\u003e\n Power Indicator: Solid Red (powered)\n \u003c\/li\u003e\n \u003cli\u003e\n Working Status Indicator: Flashing white (UART communication with FC abnormal), Solid White (communication with FC normal), Flashing green (wireless signal being connected), Solid Green (connection with App successful)\n \u003c\/li\u003e\n \u003cli\u003e\n Size: 14\n \u003cem\u003e\n 11\n \u003c\/em\u003e\n 0.8mm\n \u003c\/li\u003e\n \u003cli\u003e\n Weight: 5g\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n Included\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n 1x SpeedyBee BT Nano 3 Wireless FC Config board\n \u003c\/li\u003e\n \u003cli\u003e\n 1x Accessories Kit (contents may vary from images based on supply)\n \u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"SpeedyBee","offers":[{"title":"Default Title","offer_id":56578289467773,"sku":"SB-BTNANO3","price":7.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/Speedybee-BT-Nano-3-2.jpg?v=1753831564"},{"product_id":"vifly-finder-mini-drone-buzzer","title":"Vifly Finder Mini Drone Buzzer","description":"\u003cp\u003e\n Are you tired of constantly searching for your lost drone? Say goodbye to stressful searches with the VIFLY Finder Mini.\n\u003c\/p\u003e\n\u003cp\u003e\n The Finder Mini is a tiny yet powerful drone buzzer that can reach volumes up to 100 dB. Its compact size and lightweight of only 2.7g makes it perfect for compact builds, and its integrated 1S 40mAh LiPo battery guarantees a beep time of up to 7 hours, even after a crash or battery failure. With its maintenance-free 5V connection, the internal battery of the Finder Mini is always charged and ready to use.\n\u003c\/p\u003e\n\u003cp\u003e\n The Finder Mini is a compact and lightweight version of the\n \u003ca href=\"https:\/\/www.unmannedtechshop.co.uk\/product\/vifly-finder-v2-lost-model-buzzer-alarm\/\"\u003e\n VIFLY Finder 2\n \u003c\/a\u003e\n , and is perfect for micro quads and form factor-sensitive builds.\n\u003c\/p\u003e\n\u003cp\u003e\n Don't settle for a standard buzzer, upgrade to the VIFLY Finder Mini and never lose your drone again. Make sure you have peace of mind and fly with confidence.\n\u003c\/p\u003e\n\u003cp\u003e\n \u003c\/p\u003e\u003cdiv style=\"position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; margin: 10px 0;\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/eEzaXgdRPBg\" frameborder=\"0\" allowfullscreen style=\"position: absolute; top: 0; left: 0; width: 100%; height: 100%;\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\n\u003ch2\u003e\n Includes\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n 1 x VIFLY Finder Mini Drone Buzzer\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n \u003cstrong\u003e\n \u003cem\u003e\n Please note, because this item includes a built in lithium battery there are some restrictions as to what postage methods you can use when ordering this.\n \u003c\/em\u003e\n \u003c\/strong\u003e\n\u003c\/p\u003e\n\u003ch2\u003e\n Vifly Finder 2 VS Finder Mini\n\u003c\/h2\u003e\n\u003ctable\u003e\n \u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003e\n \u003c\/td\u003e\n \u003ctd\u003e\n Vifly Finder V2\n \u003c\/td\u003e\n \u003ctd\u003e\n Vifly Finder Mini\n \u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e\n Weight\n \u003c\/td\u003e\n \u003ctd\u003e\n 4.9g\n \u003c\/td\u003e\n \u003ctd\u003e\n 2.7g\n \u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e\n Size (mm)\n \u003c\/td\u003e\n \u003ctd\u003e\n 24x16x13\n \u003c\/td\u003e\n \u003ctd\u003e\n 19x11x12\n \u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e\n Battery Capacity\n \u003c\/td\u003e\n \u003ctd\u003e\n 80mAh\n \u003c\/td\u003e\n \u003ctd\u003e\n 40mAh\n \u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e\n Run Time (up to)\n \u003c\/td\u003e\n \u003ctd\u003e\n 30 hours\n \u003c\/td\u003e\n \u003ctd\u003e\n 7 hours\n \u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e\n Light Sensor\n \u003c\/td\u003e\n \u003ctd\u003e\n Yes\n \u003c\/td\u003e\n \u003ctd\u003e\n No\n \u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e\n Volume (My Data)\n \u003c\/td\u003e\n \u003ctd\u003e\n 106dB\n \u003c\/td\u003e\n \u003ctd\u003e\n 90dB\n \u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/tbody\u003e\n\u003c\/table\u003e\n","brand":"ViFly","offers":[{"title":"Default Title","offer_id":56578297397629,"sku":"VFINDER2-MINI","price":8.7,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/vifly_finder_mini.jpg?v=1753831639"},{"product_id":"t-motor-mini-racer-20x20-f7-flight-controller","title":"T-Motor Mini Racer 20x20 F7 Flight Controller","description":"\u003cp\u003e\n Introducing the T-Motor Mini Racer F7: Your Tiny Titan for Terrific Flights!\n\u003c\/p\u003e\n\u003cp\u003e\n Are you tired of bulky flight controllers weighing down your drone? Fear not, for the T-Motor Mini Racer F7 is here to save the day! This 3-6S 20x20 mini flight controller is packed with impressive features and designed for easy maintenance, giving you the perfect blend of power and convenience.\n\u003c\/p\u003e\n\u003cp\u003e\n 🚀 Ladies and gentlemen, hold on to your propellers, because this pint-sized powerhouse comes with a 16MB Blackbox flash memory, a 5V.2A BEC, and an ultra-precise BMI270 gyro. It's like having a tiny superhero on board, ready to make your drone flights smoother and more stable than ever before.\n\u003c\/p\u003e\n\u003cp\u003e\n 🏁 Now, let's dive into the nitty-gritty. The T-Motor Mini Racer F7 boasts some seriously impressive features:\n\u003c\/p\u003e\n\u003col\u003e\n \u003cli\u003e\n USB Power Support: No LiPo? No problem! Power it up via USB.\n \u003c\/li\u003e\n \u003cli\u003e\n Lightweight Design: Less weight means more fun in the air!\n \u003c\/li\u003e\n \u003cli\u003e\n 16M Blackbox Flash Memory: Store your flight data like a boss.\n \u003c\/li\u003e\n \u003cli\u003e\n Gyro Low Dropout Regulator: Ensures a stable performance for your drone.\n \u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\n 🤓 Still not convinced? Well, how about a USB-C connection, IMU BMI270, and 4 UARTS for all your drone's communication needs? With this flight controller, you'll be the envy of every drone pilot in the neighbourhood!\n\u003c\/p\u003e\n\u003cp\u003e\n 💥 Get ready to elevate your drone experience with the T-Motor Mini Racer F7. Included in your purchase are: 1x T-Motor Mini Racer 20x20 F7 Flight Controller 1x Connector Wire 4x Damping Grommets (Pre-Installed)\n\u003c\/p\u003e\n\u003ch2\u003e\n Specifications:\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n Mounting Hole: 20x20mm M3\n \u003c\/li\u003e\n \u003cli\u003e\n MCU: STM32F722RET6\n \u003c\/li\u003e\n \u003cli\u003e\n BEC: 5V\/2A (Peak 2.5A)\n \u003c\/li\u003e\n \u003cli\u003e\n Dimensions: 31x30mm\n \u003c\/li\u003e\n \u003cli\u003e\n Blackbox: YES (16MB)\n \u003c\/li\u003e\n \u003cli\u003e\n Input Voltage: 3-6S\n \u003c\/li\u003e\n \u003cli\u003e\n Gyro: BMI270\n \u003c\/li\u003e\n \u003cli\u003e\n Weight: 4.7g\n \u003c\/li\u003e\n \u003cli\u003e\n OSD: YES\n \u003c\/li\u003e\n \u003cli\u003e\n UARTs: 4\n \u003c\/li\u003e\n \u003cli\u003e\n FIrmware Target: TMPacerF7Mini\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n Don't miss out on the fun, and grab your T-Motor Mini Racer F7 today from Unmanned Tech. Let the drone adventures begin!\n\u003c\/p\u003e\n\u003cp\u003e\n \u003cimg alt=\"\" class=\"alignnone size-full wp-image-573368\" height=\"1373\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/T-Motor-Mini-Racer-20x20-F7-Flight-Controller-Infographic1.jpg?v=1754237235\" width=\"940\"\u003e\n \u003cimg alt=\"\" class=\"alignnone size-full wp-image-573371\" height=\"1336\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/T-Motor-Mini-Racer-20x20-F7-Flight-Controller-Infographic2.jpg?v=1754237237\" width=\"940\"\u003e\n \u003cimg alt=\"\" class=\"alignnone size-full wp-image-573365\" height=\"907\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/T-Motor-Mini-Racer-20x20-F7-Flight-Controller-Infographic.jpg?v=1754237240\" width=\"940\"\u003e\n\u003c\/p\u003e\n\u003cp\u003e\n Please note, the firmware target for this FC is\n \u003cstrong\u003e\n TMPacer F7 Mini\n \u003c\/strong\u003e\n\u003c\/p\u003e\n\u003ch2\u003e\n Includes\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n 1x T-Motor Mini Racer 20x20 F7 Flight Controller\n \u003c\/li\u003e\n \u003cli\u003e\n 1x Connector Wire\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n\u003c\/p\u003e\n","brand":"T-Motor","offers":[{"title":"Default Title","offer_id":56578297332093,"sku":"A97-70D-B08","price":51.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/Tmotor-Mini-Racer-FC-1.jpg?v=1753831640"},{"product_id":"furiousfpv-bluetooth-module-racepit-stealth-vtx-f-35","title":"FuriousFPV Bluetooth Module (Racepit, Stealth VTX, F-35)","description":"\u003cp\u003e\n One of the cool features of FuriousFPV gear is that they have a pluggable Bluetooth module and companion app (IOS\/Android) that let you configure your various devices remotely.\n\u003c\/p\u003e\n\u003ch2\u003e\n FurousFPV Bluetooth Module Device Compatibility\n\u003c\/h2\u003e\n\u003cp\u003e\n There are a load of different Bluetooth modules available that can make buying one very confusing. But the truth is they are all largely the same module with different baud rates for the various devices. But when you look at the details it boils down to two baud rates as shown in the table below. So depending on what device you plan you use you can buy the appropriate one. The VTX units all run on 115200 and this means the bluetooth module is interchangeable between them. The F-35 uses a slower baud rate so there is a separate module for this.\n\u003c\/p\u003e\n\u003cp\u003e\n If you plan to connect your bluetooth module directly to your FC, then you can use any one. Just set the correct baud rate in Betaflight.\n\u003c\/p\u003e\n\u003cp\u003e\n \u003cimg alt=\"\" class=\"aligncenter size-full wp-image-182128\" height=\"418\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/FFPV-Bluetooth.jpg?v=1754233470\" width=\"541\"\u003e\n\u003c\/p\u003e\n\u003cp\u003e\n \u003cimg alt=\"\" class=\"aligncenter size-full wp-image-182122\" height=\"1485\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/bluetooth-STEALTH-MINI-1.jpg?v=1754233473\" width=\"797\"\u003e\n\u003c\/p\u003e\n","brand":"Furious FPV","offers":[{"title":"115200","offer_id":56578302181757,"sku":"FPV-0368-S","price":11.95,"currency_code":"GBP","in_stock":false},{"title":"57600","offer_id":56578302214525,"sku":"0A7-5FA-A32","price":15.18,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/bluetoth.jpg?v=1753831662"},{"product_id":"vifly-gps-mate-gps-power-module-w-finder-2-buzzer","title":"Vifly GPS-Mate GPS Power Module \/w Finder 2 Buzzer","description":"\u003cp\u003e\n Introducing the VIFLY GPS-mate, the ultimate solution for all your GPS power needs. This external power module is equipped with an on\/off switch and a built-in VIFLY Finder 2 lost drone alarm. The GPS-mate ensures that your GPS never loses power during your flying session, eliminating the need for requiring GPS fixes while swapping battery packs. With this device even if you crash your drone, the GPS will should still have power and you will be able to locate it faster.\n\u003c\/p\u003e\n\u003cp\u003e\n We understand the struggles that drone pilots face with slow and easily interfered GPS modules. That's why we designed the GPS-mate, to fix the pain and ensure that your GPS is always powered and ready to go. With the GPS-mate, once you are ready to fly, simply flip the switch and power on only your GPS. The drone LiPo will power the drone and recharge the GPS battery, eliminating the need for a hot-start fix and preventing any potential overheating issues.\n\u003c\/p\u003e\n\u003cp\u003e\n In addition to its power capabilities, the GPS-mate also features a VIFLY Finder 2 function. This can work as a standard buzzer that is controlled via your radio when the quad battery is connected, or as a standalone buzzer to help you find your lost drone when the main battery has been ejected.\n\u003c\/p\u003e\n\u003cp\u003e\n Say goodbye to the hassle of constantly waiting for GPS fixes and hello to the convenience and reliability of the VIFLY GPS-mate. Order yours today and take your flying experience to the next level, even if you crash your drone, you will be able to locate it with the power of the GPS-mate.\n\u003c\/p\u003e\n\u003cp\u003e\n \u003c\/p\u003e\u003cdiv style=\"position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; margin: 10px 0;\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/TUMP4AnLk-M\" frameborder=\"0\" allowfullscreen style=\"position: absolute; top: 0; left: 0; width: 100%; height: 100%;\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\n\u003ch2\u003e\n Specifications\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n Buzzer Working Time: Up to 4 hours\n \u003c\/li\u003e\n \u003cli\u003e\n Output Current: Up to 80mA\n \u003c\/li\u003e\n \u003cli\u003e\n Buzzer Volume: Up to 90dB\n \u003c\/li\u003e\n \u003cli\u003e\n Charging Time: 1.5 Hours\n \u003c\/li\u003e\n \u003cli\u003e\n Input Voltage: 4.5-5.5V\n \u003c\/li\u003e\n \u003cli\u003e\n Size: 26 X 20 X 8 mm\n \u003c\/li\u003e\n \u003cli\u003e\n LiPo Voltage: 3.7V\n \u003c\/li\u003e\n \u003cli\u003e\n LiPo Size: 50mAh\n \u003c\/li\u003e\n \u003cli\u003e\n Weight: 3.5g\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n Includes\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n 1x VIFLY GPS-mate External GPS Power Module w\/ Built-In Finder 2 Buzzer\n \u003c\/li\u003e\n \u003cli\u003e\n 1x Plastic Wrap\n \u003c\/li\u003e\n \u003cli\u003e\n 1x 5pin Cable\n \u003c\/li\u003e\n \u003cli\u003e\n 1x 4pin Cable\n \u003c\/li\u003e\n \u003cli\u003e\n 1x Manual\n \u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"ViFly","offers":[{"title":"Default Title","offer_id":56578303000957,"sku":"VF-GPSMATE","price":9.34,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/vifly-gps-mate-external-gps-power-module-w-built-in-finder-2-buzzer-main.jpg?v=1753831666"},{"product_id":"vifly-beacon-drone-buzzer","title":"Vifly Beacon Drone Buzzer","description":"\u003cp\u003e\n \u003cstrong\u003e\n Note: Vifly has changed the standard operation of this buzzer so that it will only start to beep after 30 minutes of inactivity. For more info as to why, please see this\n \u003ca href=\"https:\/\/www.dronetrest.com\/t\/vifly-beacon-drone-buzzer-has-stopped-working-properly\/10716\/2?u=unmannedtech1\"\u003e\n Forum Post\n \u003c\/a\u003e\n \u003c\/strong\u003e\n\u003c\/p\u003e\n\u003cp\u003e\n Introducing the VIFLY Beacon drone buzzer, the ultimate safeguard for your drone. With this small investment, you can save yourself hundreds of dollars in potential losses. The VIFLY Beacon is different from other drone buzzers on the market. It has a built-in motion sensor and lipo battery that automatically detects a crash and sounds an alarm to help you locate your lost drone. Plus, it works wirelessly and requires no soldering, making it easy to attach anywhere on your drone.\n\u003c\/p\u003e\n\u003cp\u003e\n The VIFLY Beacon's alarm is super loud, with a volume of over 100 dB, making it easy to locate your drone even in long distances. Plus, its bright LED light flashes automatically in the dark, making it even easier to spot. Additionally, it has anti-theft technology, beeping continuously to warn anyone who tries to take your drone while it's in alarm status. The VIFLY Beacon is also equipped with a position light at night to make your drone visible when the built-in light sensor detects the darkness. Weighing in at only 6 grams, it has almost no impact on your drone's flight performance.\n\u003c\/p\u003e\n\u003cp\u003e\n Activating the VIFLY Beacon is easy, just hold the button for 2-5 seconds to turn it on or off. When turned on, the buzzer will sound 2 whispers continuously and the LED will be on briefly. When turned off, the buzzer will sound 3 whispers continuously. The sensitivity of the motion sensor can also be adjusted using the micro USB cable and pressing the button shortly to enter the sensitivity setting within 10 seconds. The VIFLY Beacon can be charged via micro USB cable and has a charge time of 1.5 hours and a working time of up to 30 hours. The VIFLY Beacon's size is 25x14x15mm and weighs 6 grams.\n\u003c\/p\u003e\n\u003cp\u003e\n \u003cstrong\u003e\n Operation\n \u003c\/strong\u003e\n\u003c\/p\u003e\n\u003cul\u003e\n \u003cli\u003e\n How to Activate: Hold the button for 2-5 seconds to turn on or off. When turning on, the buzzer will sound 2 whispers continuously and LED is on shortly. When turning off, the buzzer will sound 3 whispers continuously.\n \u003c\/li\u003e\n \u003cli\u003e\n How to Alarm: When detecting a big crash, VIFLY Beacon will enter pre-alarm status that it will sound 1 whistle every 3 seconds. If another movement is detected in 30 seconds, the pre-alarm status will be released. If no movement is detected in 30 seconds, it will enter alarm status. The buzzer will beep 2 loud sounds continuously every 6 or 12 seconds. LED will flash when detecting the light darkness.\n \u003c\/li\u003e\n \u003cli\u003e\n Stealing Alert: Stealing alert function will be activated when VIFLY Beacon enters the alarm status. If detecting quick movement, it will beep continuously to warn the picker. Hold the button for 2-5 seconds to turn off the buzzer and release the warning status.\n \u003c\/li\u003e\n \u003cli\u003e\n Motion Sensitivity Setting: Plugin the micro USB cable and hold the power button for 2-5 seconds that the LED starts to blink, press the button shortly to enter the sensitivity setting within 10 seconds.LED blinks one time, the sensitivity is high, LED blinks two times, the sensitivity is medium, LED blinks three times, the sensitivity is low. Hold the button 2-5 seconds to save the setting.\n \u003c\/li\u003e\n \u003cli\u003e\n How to Charge: When the battery voltage is low, the buzzer will beep 2 low sounds every 1 second. Charging via Micro USB cable, the LED light will be off when it is fully charged.\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n Specifications\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n Size (L x W x H) 25x14x15 mm\n \u003c\/li\u003e\n \u003cli\u003e\n Weight 6 grams\n \u003c\/li\u003e\n \u003cli\u003e\n Volume Up to 105 dB\n \u003c\/li\u003e\n \u003cli\u003e\n Working Time Up to 30 hours\n \u003c\/li\u003e\n \u003cli\u003e\n Charge Time 1.5 hours\n \u003c\/li\u003e\n \u003cli\u003e\n Battery 80mAh LiPo\n \u003c\/li\u003e\n \u003cli\u003e\n Input Voltage 4.5 - 5.5 V\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n \u003cstrong\u003e\n Alarm Pattern\n \u003c\/strong\u003e\n\u003c\/p\u003e\n\u003ctable border=\"1\" cellspacing=\"1\"\u003e\n \u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003e\n First 30 seconds\n \u003c\/td\u003e\n \u003ctd\u003e\n 30s to 2 hours\n \u003c\/td\u003e\n \u003ctd\u003e\n After 2 hours\n \u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e\n Low volume\n \u003c\/td\u003e\n \u003ctd\u003e\n Max volume every 6s\n \u003c\/td\u003e\n \u003ctd\u003e\n every 12s \/ idle until dawn\n \u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003e\n Includes\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n 1x Vifly Beacon Drone Buzzer\n \u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"ViFly","offers":[{"title":"Default Title","offer_id":56578306408829,"sku":"VF-BEACON","price":11.98,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/51yorcu5cxl._sl1000__1.jpg?v=1753831679"},{"product_id":"hobbywing-xrotor-f7-convertible-flight-controller","title":"Hobbywing XRotor F7 Convertible Flight Controller","description":"\u003cp\u003eGet ready to fly like a pro with the XRotor F7 Convertible Flight Controller from Hobbywing! This bad boy is packed with super hardware and lightning fast running speed, thanks to its STM32F722 MCU and high sensitivity ICM20602 six-axis motion sensor. Plus, it's fully equipped to support bidirectional DShot digital throttle communication.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note, since this is quite an old FC, new versions of Betaflight may not support the target using the GUI, you will need to create the config yourself using betaflight CLI.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv style=\"position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; margin: 10px 0;\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/o1SzRl8v85o\" style=\"position: absolute; top: 0; left: 0; width: 100%; height: 100%;\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003cp\u003eBut that's not all, this flight controller also comes with a special interface for the DJI image transmission system, allowing for seamless plug-and-play action. And let's not forget about the on-board 5V \u0026amp; 12V dual BEC circuit, which will give you the power to run all your image transmission and 12V LED devices.\u003c\/p\u003e\n\u003cp\u003eAnd the XRotor F7 doesn't just support one type of firmware, oh no. It supports BetaFlight, Cleanflight, Butterflight, iNav, and other mainstream FPV firmware, so you can customize your flying experience to your exact specifications. Plus, it's designed with a unique installation design and shock absorption structure, making it more stable and accurate in flight.\u003c\/p\u003e\n\u003cp\u003eIt's also a perfect match for Hobbywing ESC and has volt\/amp monitoring port, buzzer output port, Micro USB port, switch module of board load graphic transmission and double M3 mounting holes with damping aprons making it even more convenient to use. \u003cbr\u003eUpgrade your flying game with the XRotor F7 Convertible Flight Controller from Hobbywing!\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eEquipped with STM32F722 MCU which has powerful computing ability and fast running speed, and high sensitivity ICM20602 six-axis motion sensor.\u003c\/li\u003e\n\u003cli\u003eSupports BetaFlight, Cleanflight, Butterflight, Inva, and other mainstream FPV firmware.\u003c\/li\u003e\n\u003cli\u003eDJI image transmission system port equipped with corresponding flat cable\u003c\/li\u003e\n\u003cli\u003eSupports bidirectional DShot digital throttle communication.\u003c\/li\u003e\n\u003cli\u003eUnique installation design and shock absorption structure.\u003c\/li\u003e\n\u003cli\u003eOn-board large capacity Flash memory chip.\u003c\/li\u003e\n\u003cli\u003eOn-board 5V \u0026amp; 12V dual BEC circuit.\u003c\/li\u003e\n\u003cli\u003eOn-board Pit Switch module.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg class=\"alignnone size-medium\" height=\"3197\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/Hobbywing-XRotor-F7-Convertible-Flight-Controller-Infographic.jpg?v=1754234126\" width=\"1200\"\u003e\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCompatible with (Modes): PWM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600, DShot1200, Proshot1000 and etc\u003c\/li\u003e\n\u003cli\u003eCompatible with (Transmitters): PPM, Spektrum, SBUS, SUMD, SUMH, XBUS, IBUS, JETIEXBUS, CRSF, SRXL\u003c\/li\u003e\n\u003cli\u003eMounting Holes: Convertible 20x20mm \/ 30.5x30.5mm\u003c\/li\u003e\n\u003cli\u003eProgramming via: Betaflight\/Cleanflight-configurator\u003c\/li\u003e\n\u003cli\u003eFirmware: HOBBYWING_XROTORF7CONV\u003c\/li\u003e\n\u003cli\u003eVoltage Monitoring: Supported\u003c\/li\u003e\n\u003cli\u003eCurrent Monitoring: Supported\u003c\/li\u003e\n\u003cli\u003eFC Programming: Supported\u003c\/li\u003e\n\u003cli\u003eExternal Buzzer: Supported\u003c\/li\u003e\n\u003cli\u003eBEC: 5V@1.5: 10V@1.5A\u003c\/li\u003e\n\u003cli\u003eLED Control: Supported\u003c\/li\u003e\n\u003cli\u003eUSB Port: MicroUSB\u003c\/li\u003e\n\u003cli\u003eSize: 32x32mm\u003c\/li\u003e\n\u003cli\u003eOSD: Built-in\u003c\/li\u003e\n\u003cli\u003eWeight: 3.3g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eManual\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.hobbywing.com\/products\/enpdf\/XRotorMicoFlightConolerF7en.pdf\" rel=\"noopener\" target=\"_blank\"\u003e Hobbywing XRotor F7 FC \u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eIncludes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x Hobbywing XRotor F7 Convertible Flight Controller\u003c\/li\u003e\n\u003cli\u003e1x Soft Mounting Grommets Set\u003c\/li\u003e\n\u003cli\u003e1x Signal Cable\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"HobbyWing","offers":[{"title":"Default Title","offer_id":56578314895741,"sku":"6D3-5D4-244","price":19.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/hobbywing_xrotor_f7_fc_3.jpg?v=1753831751"},{"product_id":"diatone-tbs-unify-pro32-adaptor-low-ripple-power-board","title":"Diatone TBS Unify Pro32 Adaptor \/ Low Ripple Power Board","description":"\u003cp\u003e\n This is an TBS adaptor board used in most of Diatone quads. It is a small PCB that lets you mount your TBS unify pro32 nano onto your flight stack. The 20mm and 30mm versions also include some power filtering and space to mount your crossfire nano RX too. Available in 16x16, 20x20, and 30x30 stack sizes.\n\u003c\/p\u003e\n\u003cul\u003e\n \u003cli\u003e\n The 16mm adaptor board only fits the TBS Unify Pro32 Nano\n \u003c\/li\u003e\n \u003cli\u003e\n The 20mm adaptor board fits the TBS Unify Pro32 Nano and a Crossfire Nano RX and includes some power filtering.\n \u003c\/li\u003e\n \u003cli\u003e\n The 30mm adaptor board fits TBS Unify Pro32 Nano and a Crossfire Nano RX and includes more power filtering.\n \u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"Diatone","offers":[{"title":"16mm","offer_id":56578318139773,"sku":"1D4-71E-735","price":1.95,"currency_code":"GBP","in_stock":true},{"title":"20mm (Smart Audio Switch)","offer_id":56578318172541,"sku":"840-EE6-F5E","price":3.02,"currency_code":"GBP","in_stock":true},{"title":"20mm","offer_id":56578318205309,"sku":"E14-303-DD3","price":4.99,"currency_code":"GBP","in_stock":false},{"title":"30mm","offer_id":56578318238077,"sku":"5D6-847-F51","price":5.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/tbs-unify-pro32-nano-adaptor-board-2020-accessories-electronic-system-gt-b-x-diatone-official-technology-device_713_1024x1024_402x_a2627dbf-ae1e-493f-8f36-014a4cb61743.jpg?v=1753831758"},{"product_id":"foxeer-f722-mini-v4-fc-icm42688","title":"Foxeer F722 Mini V4 FC ICM42688","description":"\u003ch1\u003e\n Foxeer F722 Mini V4 Flight Controller\n\u003c\/h1\u003e\n\u003cp\u003e\n Who says you need a full-size board to get full-size processing power? This is the\n \u003cstrong\u003e\n Foxeer F722 Mini V4\n \u003c\/strong\u003e\n , a flight controller that shoehorns a ridiculously powerful F7 processor into a featherlight, 20x20mm package. It's the perfect brain for builders who obsess over every gram but refuse to sacrifice performance. If you're building a lightweight ripper, this is the FC you've been looking for.\n\u003c\/p\u003e\n\u003ch3\u003e\n Why You Want It\n\u003c\/h3\u003e\n\u003cp\u003e\n You want this because your ultralight 5-inch or 3-inch beast deserves a fast brain. The F722 CPU gives you the freedom to run full RPM filtering, presets, and all the latest Betaflight goodies without turning your quad into a stuttering mess. Weighing in at just 4 grams, it delivers pure, concentrated performance. With four UARTs and a rock-solid 5V\/2.5A BEC, you have everything essential for a clean, powerful build, minus the fluff and the weight.\n\u003c\/p\u003e\n\u003ch3\u003e\n Specifications\n\u003c\/h3\u003e\n\u003cul\u003e\n \u003cli\u003e\n \u003cstrong\u003e\n CPU:\n \u003c\/strong\u003e\n STM32F722 (Full-size processing power in a fun-size package.)\n \u003c\/li\u003e\n \u003cli\u003e\n \u003cstrong\u003e\n Gyro:\n \u003c\/strong\u003e\n ICM-42688 (A modern, reliable gyro to keep you locked in.)\n \u003c\/li\u003e\n \u003cli\u003e\n \u003cstrong\u003e\n Power Input:\n \u003c\/strong\u003e\n 2-6S LiPo (The sweet spot for almost every freestyle build.)\n \u003c\/li\u003e\n \u003cli\u003e\n \u003cstrong\u003e\n BEC Output:\n \u003c\/strong\u003e\n DC 5V \/ 2.5A (Plenty of clean juice for your VTX and receiver.)\n \u003c\/li\u003e\n \u003cli\u003e\n \u003cstrong\u003e\n Black Box:\n \u003c\/strong\u003e\n 16MB (For when you need to prove it was a desync, not pilot error.)\n \u003c\/li\u003e\n \u003cli\u003e\n \u003cstrong\u003e\n UARTs:\n \u003c\/strong\u003e\n 4 Sets (Receiver, VTX, GPS... and one left over for that LED strip you've been meaning to add.)\n \u003c\/li\u003e\n \u003cli\u003e\n \u003cstrong\u003e\n Mounting Hole:\n \u003c\/strong\u003e\n 20x20mm (The standard for builds that don't have a weight problem.)\n \u003c\/li\u003e\n \u003cli\u003e\n \u003cstrong\u003e\n Weight:\n \u003c\/strong\u003e\n 4g (You've probably got prop nuts that weigh more than this.)\n \u003c\/li\u003e\n \u003cli\u003e\n \u003cstrong\u003e\n USB:\n \u003c\/strong\u003e\n Micro-USB (Its one quirky, retro feature. Don't pretend you don't have a cable somewhere.)\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\n What's in the Box*\n\u003c\/h3\u003e\n\u003cul\u003e\n \u003cli\u003e\n 1x Foxeer F722 Mini V4 Flight Controller\n \u003c\/li\u003e\n \u003cli\u003e\n 4x Rubber Columns (To keep your tiny, powerful brain happy and vibe-free.)\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n Disclaimer\n\u003c\/h2\u003e\n\u003cp\u003e\n *The box contains the FC and its little rubber boots. Any magic smoke that appears upon plugging it in is, sadly, supplied by you.\n\u003c\/p\u003e\n\u003ch2\u003e\n Still Here?\n\u003c\/h2\u003e\n\u003cp\u003e\n You're deep in the weeds of a lightweight build, aren't you? Weighing every component, staring at your digital scales. We get it. This is the\n \u003cstrong\u003e\n lightweight F7 flight controller\n \u003c\/strong\u003e\n that ends your search. It has the power you need without the grams you don't. Stop deliberating and start soldering. Your frame is waiting.\n\u003c\/p\u003e\n","brand":"Foxeer","offers":[{"title":"Default Title","offer_id":56578319155581,"sku":"F-MR1863","price":38.5,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/fOXEER-f722-MIN-FC-4.png?v=1753831777"},{"product_id":"jhe42b-s-finder-lost-model-buzzer-alarm","title":"JHE42B S Finder Lost Model Buzzer Alarm","description":"\u003cp\u003e\n The JHE42B S Finder is a 5v buzzer with integrated battery, now smaller than the first version. This allows you to locate your drone even if the main battery has disconnected. The S version is now smaller but still sold at the same price as before!\n\u003c\/p\u003e\n\u003ch2\u003e\n Key Features\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n \u003cdiv\u003e\n Item name: JHE42B_S Finder\n \u003c\/div\u003e\n \u003c\/li\u003e\n \u003cli\u003e\n \u003cdiv\u003e\n Size: 18*17*15MM\n \u003c\/div\u003e\n \u003c\/li\u003e\n \u003cli\u003e\n \u003cdiv\u003e\n Weight: 4.3 g\n \u003c\/div\u003e\n \u003c\/li\u003e\n \u003cli\u003e\n \u003cdiv\u003e\n Built-in battery: 75mah\n \u003c\/div\u003e\n \u003c\/li\u003e\n \u003cli\u003e\n \u003cdiv\u003e\n Working time: 1 hour\n \u003c\/div\u003e\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n How to turn off the buzzer\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n \u003cdiv\u003e\n Press and hold the release button for more than 2 seconds, the JHE42B_S Finder turns off the sound.\n \u003c\/div\u003e\n \u003c\/li\u003e\n \u003cli\u003e\n \u003cdiv\u003e\n The JHE42B_S Finder is compatible with all BF and CF flight controls.\n \u003c\/div\u003e\n \u003c\/li\u003e\n \u003cli\u003e\n \u003cdiv\u003e\n Just connect to the buzzer interface of the flight controller and it will work.\n \u003c\/div\u003e\n \u003c\/li\u003e\n \u003cli\u003e\n \u003cdiv\u003e\n When the flight control wiring is correct, the multi-rotor aircraft is powered on, and the flight control power supply will automatically charge the JHE42B_S Finder (the red LED will light to indicate that charging is in progress,\n \u003c\/div\u003e\n \u003c\/li\u003e\n \u003cli\u003e\n \u003cdiv\u003e\n Red LED off means charging is saturated; red light flashing means flight controller is powered off, wait 30 seconds waiting time).\n \u003c\/div\u003e\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n How to connect\n\u003c\/h2\u003e\n\u003cp\u003e\n \u003cimg alt=\"jhe42b-connection.jpg\" class=\"__mce_add_custom__\" height=\"568\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/jhe42b-connection_fd898352-a833-4c48-ad08-32843a7cc53c.jpg?v=1754234624\" title=\"jhe42b-connection.jpg\" width=\"800\"\u003e\n\u003c\/p\u003e\n\u003cp\u003e\n \u003cimg alt=\"jhe42b-buzzer.jpg\" class=\"__mce_add_custom__\" height=\"603\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/jhe42b-buzzer_1e023cf3-6ccf-4ba4-baef-621dfa8976bf.jpg?v=1754234626\" title=\"jhe42b-buzzer.jpg\" width=\"805\"\u003e\n\u003c\/p\u003e\n","brand":"Unmanned Tech","offers":[{"title":"Default Title","offer_id":56578321875325,"sku":"EF7-4CC-A55","price":6.45,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/JHE42b-s-finder-1.jpg?v=1753831795"},{"product_id":"pixhawk-mini-carrier-board-without-pixhawk-cube-sl4","title":"CubePilot Cube Mini Carrier Board","description":"\u003cp\u003eThe Cube Mini Carrier Board is a compact and versatile flight controller base board designed for use with the Cube Mini and Cube Orange+ autopilot systems. With its standardised DF17 connector, the Mini Carrier Board can be easily connected to every version of the Cube flight controller, making it an ideal choice for applications that have size limits. Despite its smaller size, the Mini Carrier Board offers almost the same capabilities as the Pixhawk 2.1 standard carrier board and the Cube Orange Carrier Board.\u003c\/p\u003e\n\u003cp\u003eIn addition to its size and compatibility, the Mini Carrier Board also offers a range of useful functionality, including dual power input for redundant power, automatic switchover to another power source if one fails, and power distribution to limit the current at each connector and prevent overloading. It also includes voltage protection to shut down the circuit if the voltage exceeds the limit.\u003c\/p\u003e\n\u003cp\u003ePlease note that the \u003ca href=\"https:\/\/www.unmannedtechshop.co.uk\/products\/pixhawk-cube-mini-purple-imu-no-carrier-board-included\"\u003e Cube Mini IMU \u003c\/a\u003e \/ \u003ca href=\"https:\/\/www.unmannedtechshop.co.uk\/products\/cubepilot-cube-orange-module\"\u003e Cube Orange \u003c\/a\u003e is not included in this kit. The kit includes only one Mini Carrier Board. If you are in need of a reliable and compact flight controller board for your UAV, the Mini Carrier Board is an excellent choice when paired with one of the Cube autopilot modules.\u003c\/p\u003e\n\u003ch2\u003eFunctionality of Carrier Board:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDual power input (for redundant power, automatic switch to another power when one fails)\u003c\/li\u003e\n\u003cli\u003ePower distribution (limit the current at each connector, avoiding overloading when one device draws too large current)\u003c\/li\u003e\n\u003cli\u003eVoltage protection (over or under voltage protection, the circuit will be shut down if the voltage exceeds the limit)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e Note: Cube Mini IMU is not included\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2 data-content-type=\"heading\" data-appearance=\"default\" data-element=\"main\"\u003eSpecifications\u003c\/h2\u003e\n\u003cdiv data-content-type=\"text\" data-appearance=\"default\" data-element=\"main\"\u003e\n\u003cul\u003e\n\u003cli\u003eInput Voltage (Power Port): 4–5.7V (safe range: 0–20V, but system won't operate outside 4–5.7V)\u003c\/li\u003e\n\u003cli\u003eWorking Temperature: -10°C to 55°C\u003c\/li\u003e\n\u003cli\u003eDimensions: 47.5 x 38.5 x 17.8 mm\u003c\/li\u003e\n\u003cli\u003eInput Current (Power Port): 2.5A\u003c\/li\u003e\n\u003cli\u003eRated Power Output\/Input: 14W\u003c\/li\u003e\n\u003cli\u003eUSB Input Voltage: 4–5.7V\u003c\/li\u003e\n\u003cli\u003eUSB Input Current: 250mA\u003c\/li\u003e\n\u003cli\u003eServo Rail Voltage: 4–10.5V\u003c\/li\u003e\n\u003cli\u003eMaterial: ABS molding\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv data-content-type=\"row\" data-appearance=\"contained\" data-element=\"main\"\u003e\n\u003cdiv data-enable-parallax=\"0\" data-parallax-speed=\"0.5\" data-background-images=\"{}\" data-background-type=\"image\" data-video-loop=\"true\" data-video-play-only-visible=\"true\" data-video-lazy-load=\"true\" data-video-fallback-src=\"\" data-element=\"inner\" data-pb-style=\"AUMDSC4\"\u003e\n\u003ch2 data-content-type=\"heading\" data-appearance=\"default\" data-element=\"main\"\u003eLinks\u003c\/h2\u003e\n\u003cdiv data-content-type=\"text\" data-appearance=\"default\" data-element=\"main\"\u003e\n\u003cul\u003e\n\u003cli\u003eCubepilot Mini Carrier Board User Guide\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv data-content-type=\"row\" data-appearance=\"contained\" data-element=\"main\"\u003e\n\u003cdiv data-enable-parallax=\"0\" data-parallax-speed=\"0.5\" data-background-images=\"{}\" data-background-type=\"image\" data-video-loop=\"true\" data-video-play-only-visible=\"true\" data-video-lazy-load=\"true\" data-video-fallback-src=\"\" data-element=\"inner\" data-pb-style=\"K6JSLOT\"\u003e\n\u003ch2 data-content-type=\"heading\" data-appearance=\"default\" data-element=\"main\"\u003eIncludes\u003c\/h2\u003e\n\u003cdiv data-content-type=\"text\" data-appearance=\"default\" data-element=\"main\"\u003e\n\u003cul\u003e\n\u003cli\u003e1x CubePilot Mini Carrier Board\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/Carrierboard_infographic_1.webp?v=1759325610\" alt=\"\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg width=\"1920\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/CubePilot-Ecosystem-OEM-Carrier-Board-Poster-scaled_e2efc2e0-a7c0-44eb-8503-564a2ff43299.jpg?v=1754235418\" height=\"2560\" class=\"aligncenter size-full wp-image-473201\" alt=\"\"\u003e\u003c\/p\u003e\n\u003ch2\u003eIncluded\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1pc Cube mini carrier board\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CubePilot","offers":[{"title":"Default Title","offer_id":56578324627837,"sku":"HX4-96041","price":70.82,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/CubePilot-Mini-Carrier-Board-4.jpg?v=1753831808"},{"product_id":"aikon-f7-mini-aio-45a-6s-flight-controller","title":"Aikon F7 Mini AIO 45A 6S Flight Controller","description":"\u003cp\u003e\n Looking for a flight controller that will elevate your cinewhoop game to the next level? Look no further than the Aikon F7 Mini 45A All-In-One Flight Controller! This little powerhouse packs a punch with a 216mhz F7 processor, independent FC and ESC PCBs for low noise, and 5 software invertible hardware UARTS.\n\u003c\/p\u003e\n\u003ch2\u003e\n Features\n\u003c\/h2\u003e\n\u003col\u003e\n \u003cli\u003e\n Onboard OSD and blackbox for real-time performance monitoring\n \u003c\/li\u003e\n \u003cli\u003e\n Connectors for DJI-HD and RC link for seamless integration with your setup\n \u003c\/li\u003e\n \u003cli\u003e\n High overhead voltage regulators rated up to 6S, capable of handling voltage spikes\n \u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\n With software controlled VTX power switch (assigned to USER1 mode by default), LED and buzzer outputs, and a 10v 1.5A voltage regulator for your DJI HD system, the Aikon F7 Mini has everything you need for a smooth and seamless flight experience. So why wait? Get your hands on this little guy today and let the good times take flight!\n\u003c\/p\u003e\n\u003ch2\u003e\n Specifications\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n 216mhz F7 processor\n \u003c\/li\u003e\n \u003cli\u003e\n Independent FC and ESC PCBs for low noise\n \u003c\/li\u003e\n \u003cli\u003e\n 5 Software invertible hardware UARTS\n \u003c\/li\u003e\n \u003cli\u003e\n Onboard OSD and blackbox\n \u003c\/li\u003e\n \u003cli\u003e\n Software controlled VTX power switch (assigned to USER1 mode by default)\n \u003c\/li\u003e\n \u003cli\u003e\n Connectors for DJI-HD and RC link\n \u003c\/li\u003e\n \u003cli\u003e\n LED and buzzer outputs (LED pad doubles as PPM)\n \u003c\/li\u003e\n \u003cli\u003e\n On-board high overhead voltage regulators rated up to 6S (50v peak to handle voltage spikes)\n \u003c\/li\u003e\n \u003cli\u003e\n 10v 1.5A voltage regulator for DJI HD system\n \u003c\/li\u003e\n \u003cli\u003e\n 3.3mm high current MOSFETs.\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ctable\u003e\n \u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003e\n Battery\n \u003c\/td\u003e\n \u003ctd\u003e\n 3-6s\n \u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e\n Mount Holes\n \u003c\/td\u003e\n \u003ctd\u003e\n 25.5*25.5mm\n \u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e\n Flight Control Firmware\n \u003c\/td\u003e\n \u003ctd\u003e\n Betaflight AIKONF7 Target\n \u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e\n MCU\n \u003c\/td\u003e\n \u003ctd\u003e\n STM32F722\n \u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e\n IMU\n \u003c\/td\u003e\n \u003ctd\u003e\n BMI270 (interrupt pin connected) or MPU6000\n \u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e\n Barometer\n \u003c\/td\u003e\n \u003ctd\u003e\n DSP310\n \u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e\n Blackbox\n \u003c\/td\u003e\n \u003ctd\u003e\n SPI 16MB\n \u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e\n ESC Firmware\n \u003c\/td\u003e\n \u003ctd\u003e\n BLHeli_32\n \u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e\n Constant Current\n \u003c\/td\u003e\n \u003ctd\u003e\n 45A\n \u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e\n Burst Current\n \u003c\/td\u003e\n \u003ctd\u003e\n 55A\n \u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e\n Current Sensor Scale\n \u003c\/td\u003e\n \u003ctd\u003e\n 200\n \u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e\n Weight\n \u003c\/td\u003e\n \u003ctd\u003e\n 14.5g\n \u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003e\n Aikon F7 Mini AIO Pinout Diagram\n\u003c\/h2\u003e\n\u003cp\u003e\n \u003cimg alt=\"\" class=\"alignnone size-full wp-image-653812\" height=\"511\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/aikon-aio-45a-mini-manual.jpg?v=1754231303\" width=\"1049\"\u003e\n\u003c\/p\u003e\n","brand":"Aikon","offers":[{"title":"BMI270","offer_id":56578330100093,"sku":"AKAIO32MM356SB","price":84.95,"currency_code":"GBP","in_stock":true},{"title":"MPU6000","offer_id":56578330132861,"sku":"AKAIO32MM356SM","price":99.95,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/aikon-f7-mini-front.jpg?v=1753831836"},{"product_id":"sub250-redfox-a2-12a-aio-fc-for-nanofly20-2s","title":"Sub250 Redfox A2 12A AIO FC for Nanofly20 2S","description":"\u003ch1\u003e\n Redfox A2 12A AIO: The 4.1g Miracle\n\u003c\/h1\u003e\n\u003cp\u003e\n Let's be honest, your last \"ultralight\" build probably weighed more than your lunch. Enter the\n \u003cstrong\u003e\n Redfox A2 12A FC\n \u003c\/strong\u003e\n , a featherlight AIO board designed by the wizards at Sub250. At a ridiculous 4.1g, including the wires, this thing is so light you'll question if we actually put anything in the box. It crams an FC, a 12A ESC, and an actual, non-SPI ELRS 2.4G receiver into one tidy package, making it the perfect brain for any\n \u003cstrong\u003e\n sub 250g FPV drone\n \u003c\/strong\u003e\n that needs to stay on the right side of the CAA paperwork tsunami.\n\u003c\/p\u003e\n\u003ch3\u003e\n Why You Want It\n\u003c\/h3\u003e\n\u003cp\u003e\n You're chasing the dream: a 1S or 2S toothpick that flies for more than 90 seconds and doesn't handle like a shopping trolley with a wonky wheel. This is it. By integrating the ExpressLRS receiver directly, the Redfox A2 saves you weight, soldering time, and the special kind of existential dread that comes from realising you forgot to order an antenna. It's the simplest way to get a powerful, responsive core into your micro-build without needing the dexterity of a brain surgeon or the patience of a saint. We're just here to sell you happiness, one gram at a time. For a modest fee, of course.\n\u003c\/p\u003e\n\u003ch3\u003e\n Specifications\n\u003c\/h3\u003e\n\u003cul\u003e\n \u003cli\u003e\n \u003cstrong\u003e\n MCU:\n \u003c\/strong\u003e\n STM32F411 (The little engine that absolutely could)\n \u003c\/li\u003e\n \u003cli\u003e\n \u003cstrong\u003e\n IMU:\n \u003c\/strong\u003e\n BMI270 (Because knowing which way is up is generally useful)\n \u003c\/li\u003e\n \u003cli\u003e\n \u003cstrong\u003e\n OSD:\n \u003c\/strong\u003e\n BetaFlight OSD w\/ AT7456E (So you can see your battery sag in glorious detail)\n \u003c\/li\u003e\n \u003cli\u003e\n \u003cstrong\u003e\n ESC:\n \u003c\/strong\u003e\n Redfox 12A (Enough grunt for your 1S or 2S shenanigans)\n \u003c\/li\u003e\n \u003cli\u003e\n \u003cstrong\u003e\n Receiver:\n \u003c\/strong\u003e\n ExpressLRS 2.4G (UART, (not SPI) Built-in, so you have one less thing to mess up)\n \u003c\/li\u003e\n \u003cli\u003e\n \u003cstrong\u003e\n Mounting:\n \u003c\/strong\u003e\n 25.5×25.5mm (The whoop standard, you know the drill)\n \u003c\/li\u003e\n \u003cli\u003e\n \u003cstrong\u003e\n Weight:\n \u003c\/strong\u003e\n 4.1g (Lighter than your existential crisis about that last crash)\n \u003c\/li\u003e\n \u003cli\u003e\n \u003cstrong\u003e\n Power:\n \u003c\/strong\u003e\n 1-2S LiPo (Don't you dare try a 3S)\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\n What's in the Box*\n\u003c\/h3\u003e\n\u003cul\u003e\n \u003cli\u003e\n 1x Redfox A2 12A AIO Flight Controller\n \u003c\/li\u003e\n \u003cli\u003e\n 4x M2 Rubber Grommets (To dampen the bad vibes)\n \u003c\/li\u003e\n \u003cli\u003e\n 1x XT30 Power Cable\n \u003c\/li\u003e\n \u003cli\u003e\n 1x 2.4G Receiver Antenna\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n A Word From Our Lawyers\n\u003c\/h2\u003e\n\u003cp\u003e\n We pack what the factory gives us, so if a grommet is missing, blame their robots, not ours. The board's the important bit, and that's guaranteed.\n\u003c\/p\u003e\n\u003ch2\u003e\n Still Here?\n\u003c\/h2\u003e\n\u003cp\u003e\n Wow, you're a dedicated reader. Or a competitor. Either way, we respect the commitment. You've scrolled this far, so you've basically burned the calories this AIO would save you. If you're looking for the ultimate\n \u003cstrong\u003e\n lightweight 2S whoop flight controller\n \u003c\/strong\u003e\n , this is your endgame. Now, go on, add it to your basket. Your other components are getting lonely.\n\u003c\/p\u003e\n","brand":"Sub250","offers":[{"title":"Default Title","offer_id":56578333868413,"sku":"SU000092","price":49.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/Redfox-A2-AIO-FC-2.webp?v=1753831850"},{"product_id":"goku-f405-ervt-1s-5a-5-in-1-400mw-elrs-aio","title":"GOKU F405 ERVT 1S 5A 5-in-1 400mw ELRS AIO","description":"\u003ch2\u003e\n \u003cb\u003e\n Next-Gen Powerhouse for Micro FPV Drones (ELRS, 400mW VTX)\n \u003c\/b\u003e\n\u003c\/h2\u003e\n\u003cp\u003e\n \u003cimg alt=\"\" class=\"alignnone size-full wp-image-726134\" height=\"2003\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/GOKU-F405-ERVT-1S-5A-5-in-1-400mw-ELRS-AIO-a.webp?v=1754233670\" width=\"1600\"\u003e\n\u003c\/p\u003e\n\u003cp\u003e\n \u003cspan style=\"font-weight: 400;\"\u003e\n Revolutionize your\n \u003c\/span\u003e\n \u003cb\u003e\n 1S Tiny Whoop\n \u003c\/b\u003e\n \u003cspan style=\"font-weight: 400;\"\u003e\n or\n \u003c\/span\u003e\n \u003cb\u003e\n micro FPV drone\n \u003c\/b\u003e\n \u003cspan style=\"font-weight: 400;\"\u003e\n build with the\n \u003c\/span\u003e\n \u003cb\u003e\n GOKU F405 ERVT 1S 5A AIO Flight Controller\n \u003c\/b\u003e\n \u003cspan style=\"font-weight: 400;\"\u003e\n ! This groundbreaking\n \u003c\/span\u003e\n \u003cb\u003e\n 5-in-1 board\n \u003c\/b\u003e\n \u003cspan style=\"font-weight: 400;\"\u003e\n integrates a powerful Flight Controller (FC), 5A Electronic Speed Controller (ESC), switchable Video Transmitter (VTX), ExpressLRS Receiver (RX), and On-Screen Display (OSD) into a single, lightweight (4g) package.\n \u003c\/span\u003e\n\u003c\/p\u003e\n\u003cp\u003e\n \u003cspan style=\"font-weight: 400;\"\u003e\n At its core lies the advanced\n \u003c\/span\u003e\n \u003cb\u003e\n STM32F405BGA MCU\n \u003c\/b\u003e\n \u003cspan style=\"font-weight: 400;\"\u003e\n , delivering a massive\n \u003c\/span\u003e\n \u003cb\u003e\n 68% increase in processing power\n \u003c\/b\u003e\n \u003cspan style=\"font-weight: 400;\"\u003e\n compared to typical F411 chips found in other micro AIOs. This translates to lightning-fast response times, lower latency, and the ability to run complex filters - essential for competitive\n \u003c\/span\u003e\n \u003cb\u003e\n FPV racing\n \u003c\/b\u003e\n \u003cspan style=\"font-weight: 400;\"\u003e\n and smooth\n \u003c\/span\u003e\n \u003cb\u003e\n freestyle acrobatics\n \u003c\/b\u003e\n \u003cspan style=\"font-weight: 400;\"\u003e\n .\n \u003c\/span\u003e\n\u003c\/p\u003e\n\u003cp\u003e\n \u003cspan style=\"font-weight: 400;\"\u003e\n Designed for ease of use, the GOKU F405 ERVT features\n \u003c\/span\u003e\n \u003cb\u003e\n modular plug-and-play interfaces\n \u003c\/b\u003e\n \u003cspan style=\"font-weight: 400;\"\u003e\n for motors, camera, and even an\n \u003c\/span\u003e\n \u003ci\u003e\n \u003cspan style=\"font-weight: 400;\"\u003e\n optional\n \u003c\/span\u003e\n \u003c\/i\u003e\n \u003cspan style=\"font-weight: 400;\"\u003e\n external blackbox recorder, minimizing soldering and build time. The onboard\n \u003c\/span\u003e\n \u003cb\u003e\n 5A BLHeli_S ESCs\n \u003c\/b\u003e\n \u003cspan style=\"font-weight: 400;\"\u003e\n (supporting Bluejay firmware) provide reliable power for your 1S motors, while the integrated\n \u003c\/span\u003e\n \u003cb\u003e\n 2.4GHz ELRS 3.0 receiver\n \u003c\/b\u003e\n \u003cspan style=\"font-weight: 400;\"\u003e\n offers incredible range and penetration.\n \u003c\/span\u003e\n\u003c\/p\u003e\n\u003cp\u003e\n \u003cspan style=\"font-weight: 400;\"\u003e\n Experience crystal-clear video with the powerful, onboard\n \u003c\/span\u003e\n \u003cb\u003e\n analog VTX\n \u003c\/b\u003e\n \u003cspan style=\"font-weight: 400;\"\u003e\n , switchable from 0mW (Pit Mode) up to\n \u003c\/span\u003e\n \u003cb\u003e\n 400mW\n \u003c\/b\u003e\n \u003cspan style=\"font-weight: 400;\"\u003e\n , controlled via IRC Tramp. The integrated pagoda-style antenna is optimized for 1S performance, aiming for excellent range and sub-50ms video latency. Searching for the ultimate\n \u003c\/span\u003e\n \u003cb\u003e\n 1S F405 AIO\n \u003c\/b\u003e\n \u003cspan style=\"font-weight: 400;\"\u003e\n , a\n \u003c\/span\u003e\n \u003cb\u003e\n high-performance Whoop flight controller\n \u003c\/b\u003e\n \u003cspan style=\"font-weight: 400;\"\u003e\n , or an\n \u003c\/span\u003e\n \u003cb\u003e\n ELRS AIO with 400mW VTX\n \u003c\/b\u003e\n \u003cspan style=\"font-weight: 400;\"\u003e\n ? The GOKU F405 ERVT is your answer.\n \u003c\/span\u003e\n\u003c\/p\u003e\n\u003cp\u003e\n \u003cb\u003e\n Key Features:\n \u003c\/b\u003e\n\u003c\/p\u003e\n\u003cul\u003e\n \u003cli style=\"font-weight: 400;\"\u003e\n \u003cb\u003e\n True 5-in-1 Integration:\n \u003c\/b\u003e\n \u003cspan style=\"font-weight: 400;\"\u003e\n FC, 5A ESC, 400mW VTX, ELRS RX, and OSD on one board.\n \u003c\/span\u003e\n \u003c\/li\u003e\n \u003cli style=\"font-weight: 400;\"\u003e\n \u003cb\u003e\n Unmatched F405 Processing Power:\n \u003c\/b\u003e\n \u003cspan style=\"font-weight: 400;\"\u003e\n 68% faster than F411 for lower latency and advanced filtering.\n \u003c\/span\u003e\n \u003c\/li\u003e\n \u003cli style=\"font-weight: 400;\"\u003e\n \u003cb\u003e\n Plug-and-Play Ready:\n \u003c\/b\u003e\n \u003cspan style=\"font-weight: 400;\"\u003e\n Solder-free connectors for motors, camera, and optional blackbox.\n \u003c\/span\u003e\n \u003c\/li\u003e\n \u003cli style=\"font-weight: 400;\"\u003e\n \u003cb\u003e\n Built-in ELRS 2.4GHz Receiver:\n \u003c\/b\u003e\n \u003cspan style=\"font-weight: 400;\"\u003e\n Flywoo EL24E RX 3.0.0 for long range and reliable link.\n \u003c\/span\u003e\n \u003c\/li\u003e\n \u003cli style=\"font-weight: 400;\"\u003e\n \u003cb\u003e\n Powerful Switchable VTX:\n \u003c\/b\u003e\n \u003cspan style=\"font-weight: 400;\"\u003e\n 0mW to 400mW output with IRC Tramp control and integrated antenna.\n \u003c\/span\u003e\n \u003c\/li\u003e\n \u003cli style=\"font-weight: 400;\"\u003e\n \u003cb\u003e\n Reliable 5A ESCs:\n \u003c\/b\u003e\n \u003cspan style=\"font-weight: 400;\"\u003e\n Supports 1S LiPo input, 5A continuous current (8A peak), Bluejay compatible.\n \u003c\/span\u003e\n \u003c\/li\u003e\n \u003cli style=\"font-weight: 400;\"\u003e\n \u003cb\u003e\n Expandable:\n \u003c\/b\u003e\n \u003cspan style=\"font-weight: 400;\"\u003e\n Supports optional Flywoo plug-and-play 512MB Blackbox module.\n \u003c\/span\u003e\n \u003c\/li\u003e\n \u003cli style=\"font-weight: 400;\"\u003e\n \u003cb\u003e\n Lightweight \u0026amp; Compact:\n \u003c\/b\u003e\n \u003cspan style=\"font-weight: 400;\"\u003e\n Only 4g with a standard 25.5x25.5mm mounting pattern.\n \u003c\/span\u003e\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n \u003cb\u003e\n Specifications:\n \u003c\/b\u003e\n\u003c\/p\u003e\n\u003cul\u003e\n \u003cli style=\"font-weight: 400;\"\u003e\n \u003cb\u003e\n MCU:\n \u003c\/b\u003e\n \u003cspan style=\"font-weight: 400;\"\u003e\n STM32F405BGA\n \u003c\/span\u003e\n \u003c\/li\u003e\n \u003cli style=\"font-weight: 400;\"\u003e\n \u003cb\u003e\n IMU (Gyro):\n \u003c\/b\u003e\n \u003cspan style=\"font-weight: 400;\"\u003e\n ICM42688P (4kHz capable)\n \u003c\/span\u003e\n \u003c\/li\u003e\n \u003cli style=\"font-weight: 400;\"\u003e\n \u003cb\u003e\n Barometer:\n \u003c\/b\u003e\n \u003cspan style=\"font-weight: 400;\"\u003e\n No\n \u003c\/span\u003e\n \u003c\/li\u003e\n \u003cli style=\"font-weight: 400;\"\u003e\n \u003cb\u003e\n Black Box:\n \u003c\/b\u003e\n \u003cspan style=\"font-weight: 400;\"\u003e\n No (Supports external Flywoo module up to 512MB via UART2)\n \u003c\/span\u003e\n \u003c\/li\u003e\n \u003cli style=\"font-weight: 400;\"\u003e\n \u003cb\u003e\n OSD Chip:\n \u003c\/b\u003e\n \u003cspan style=\"font-weight: 400;\"\u003e\n AT7456E\n \u003c\/span\u003e\n \u003c\/li\u003e\n \u003cli style=\"font-weight: 400;\"\u003e\n \u003cb\u003e\n UART Ports:\n \u003c\/b\u003e\n \u003cspan style=\"font-weight: 400;\"\u003e\n 6 (UART1 VTX, UART2 Blackbox, UART3 ELRS RX, UART4 Free, UART5 SBUS, UART6 Free)\n \u003c\/span\u003e\n \u003c\/li\u003e\n \u003cli style=\"font-weight: 400;\"\u003e\n \u003cb\u003e\n Supported RX Protocols:\n \u003c\/b\u003e\n \u003cspan style=\"font-weight: 400;\"\u003e\n CRSF (Internal ELRS), SBUS, iBus, Spektrum\n \u003c\/span\u003e\n \u003c\/li\u003e\n \u003cli style=\"font-weight: 400;\"\u003e\n \u003cb\u003e\n BEC:\n \u003c\/b\u003e\n \u003cspan style=\"font-weight: 400;\"\u003e\n 5V @ 2.0A Max\n \u003c\/span\u003e\n \u003c\/li\u003e\n \u003cli style=\"font-weight: 400;\"\u003e\n \u003cb\u003e\n Onboard Receiver:\n \u003c\/b\u003e\n \u003cspan style=\"font-weight: 400;\"\u003e\n Flywoo EL24E 2.4GHz RX (Firmware: ExpressLRS V3.0.0)\n \u003c\/span\u003e\n \u003c\/li\u003e\n \u003cli style=\"font-weight: 400;\"\u003e\n \u003cb\u003e\n FC Firmware Target:\n \u003c\/b\u003e\n \u003cspan style=\"font-weight: 400;\"\u003e\n FLYWOOF405S_AIO\n \u003c\/span\u003e\n \u003c\/li\u003e\n \u003cli style=\"font-weight: 400;\"\u003e\n \u003cb\u003e\n Dimensions:\n \u003c\/b\u003e\n \u003cspan style=\"font-weight: 400;\"\u003e\n 30.5mm x 30.5mm\n \u003c\/span\u003e\n \u003c\/li\u003e\n \u003cli style=\"font-weight: 400;\"\u003e\n \u003cb\u003e\n Mounting Holes:\n \u003c\/b\u003e\n \u003cspan style=\"font-weight: 400;\"\u003e\n 25.5mm x 25.5mm (M2)\n \u003c\/span\u003e\n \u003c\/li\u003e\n \u003cli style=\"font-weight: 400;\"\u003e\n \u003cb\u003e\n Weight:\n \u003c\/b\u003e\n \u003cspan style=\"font-weight: 400;\"\u003e\n 4g\n \u003c\/span\u003e\n \u003c\/li\u003e\n \u003cli style=\"font-weight: 400;\"\u003e\n \u003cb\u003e\n Onboard 4-in-1 ESC:\n \u003c\/b\u003e\n \u003cul\u003e\n \u003cli style=\"font-weight: 400;\"\u003e\n \u003cspan style=\"font-weight: 400;\"\u003e\n Input Power: 1S LiPo Only\n \u003c\/span\u003e\n \u003c\/li\u003e\n \u003cli style=\"font-weight: 400;\"\u003e\n \u003cspan style=\"font-weight: 400;\"\u003e\n Continuous Current: 5A per motor\n \u003c\/span\u003e\n \u003c\/li\u003e\n \u003cli style=\"font-weight: 400;\"\u003e\n \u003cspan style=\"font-weight: 400;\"\u003e\n Peak Current: 8A per motor\n \u003c\/span\u003e\n \u003c\/li\u003e\n \u003cli style=\"font-weight: 400;\"\u003e\n \u003cspan style=\"font-weight: 400;\"\u003e\n ESC Firmware: Bluejay O_H_5_48KHz_V0.19.hex\n \u003c\/span\u003e\n \u003c\/li\u003e\n \u003cli style=\"font-weight: 400;\"\u003e\n \u003cspan style=\"font-weight: 400;\"\u003e\n Protocol Support: DShot300, DShot600\n \u003c\/span\u003e\n \u003c\/li\u003e\n \u003cli style=\"font-weight: 400;\"\u003e\n \u003cspan style=\"font-weight: 400;\"\u003e\n Motor Connector: JST1.25mm plug\n \u003c\/span\u003e\n \u003c\/li\u003e\n \u003cli style=\"font-weight: 400;\"\u003e\n \u003cspan style=\"font-weight: 400;\"\u003e\n Battery Connector: A30 plug\n \u003c\/span\u003e\n \u003c\/li\u003e\n \u003c\/ul\u003e\n \u003c\/li\u003e\n \u003cli style=\"font-weight: 400;\"\u003e\n \u003c\/li\u003e\n \u003cli style=\"font-weight: 400;\"\u003e\n \u003cb\u003e\n Onboard Analog VTX:\n \u003c\/b\u003e\n \u003cul\u003e\n \u003cli style=\"font-weight: 400;\"\u003e\n \u003cspan style=\"font-weight: 400;\"\u003e\n Output Power: Pit (0mW) \/ 25mW \/ 50mW \/ 100mW \/ 200mW \/ 400mW\n \u003c\/span\u003e\n \u003c\/li\u003e\n \u003cli style=\"font-weight: 400;\"\u003e\n \u003cspan style=\"font-weight: 400;\"\u003e\n Frequency: 5.8GHz (40 Channels, including Raceband)\n \u003c\/span\u003e\n \u003c\/li\u003e\n \u003cli style=\"font-weight: 400;\"\u003e\n \u003cspan style=\"font-weight: 400;\"\u003e\n Protocol: IRC Tramp\n \u003c\/span\u003e\n \u003c\/li\u003e\n \u003cli style=\"font-weight: 400;\"\u003e\n \u003cspan style=\"font-weight: 400;\"\u003e\n Antenna: Integrated Pagoda-style\n \u003c\/span\u003e\n \u003c\/li\u003e\n \u003c\/ul\u003e\n \u003c\/li\u003e\n \u003cli style=\"font-weight: 400;\"\u003e\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n \u003cb\u003e\n What's in the Box:\n \u003c\/b\u003e\n\u003c\/p\u003e\n\u003cul\u003e\n \u003cli style=\"font-weight: 400;\"\u003e\n \u003cspan style=\"font-weight: 400;\"\u003e\n 1x GOKU F405 ERVT 1S 5A 5-in-1 400mW ELRS AIO Board\n \u003c\/span\u003e\n \u003c\/li\u003e\n \u003cli style=\"font-weight: 400;\"\u003e\n \u003cspan style=\"font-weight: 400;\"\u003e\n 1x A30 Power Cable Pigtail\n \u003c\/span\u003e\n \u003c\/li\u003e\n \u003cli style=\"font-weight: 400;\"\u003e\n \u003cspan style=\"font-weight: 400;\"\u003e\n 1x JST-0.8 3-Pin Camera Cable (50mm)\n \u003c\/span\u003e\n \u003c\/li\u003e\n \u003cli style=\"font-weight: 400;\"\u003e\n \u003cspan style=\"font-weight: 400;\"\u003e\n 1x Flywoo Blackbox Connector Cable\n \u003c\/span\u003e\n \u003c\/li\u003e\n \u003cli style=\"font-weight: 400;\"\u003e\n \u003cspan style=\"font-weight: 400;\"\u003e\n 4x JST 1.25mm 3-Pin Vertical Motor Sockets (for board side)\n \u003c\/span\u003e\n \u003c\/li\u003e\n \u003cli style=\"font-weight: 400;\"\u003e\n \u003cspan style=\"font-weight: 400;\"\u003e\n 4x M2x6.6mm Shock-Absorbing Rubber Grommets\n \u003c\/span\u003e\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n \u003cb\u003e\n \u003ci\u003e\n Disclaimer:\n \u003c\/i\u003e\n \u003c\/b\u003e\n \u003ci\u003e\n \u003cspan style=\"font-weight: 400;\"\u003e\n Please note: Included accessories such as cable lengths, connector styles, or grommet colors may vary slightly based on manufacturer supply and batch.\n \u003c\/span\u003e\n \u003c\/i\u003e\n\u003c\/p\u003e\n","brand":"Flywoo","offers":[{"title":"Default Title","offer_id":56578336162173,"sku":"FW19004272","price":47.98,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/GOKU-F405-ERVT-1S-5A-5-in-1-400mw-ELRS-AIO-1.webp?v=1753831855"},{"product_id":"tmotor-cine80a-esc","title":"Tmotor Cine80A ESC","description":"\u003cp\u003e\n \u003cstrong\u003e\n TMOTOR C80A 5-12S Single ESC: A New Benchmark in ESC Performance\n \u003c\/strong\u003e\n\u003c\/p\u003e\n\u003ch4\u003e\n \u003cstrong\u003e\n High-Performance Endurance\n \u003c\/strong\u003e\n\u003c\/h4\u003e\n\u003cp\u003e\n The TMOTOR C80A 5-12S Single ESC stands out in the drone ESC market with its remarkable ability to handle a continuous 80A load. When operating under 12S voltage, this ESC maintains its output for an impressive 30 seconds. This performance is further enhanced by a significant temperature drop of over 20°C compared to its counterparts, ensuring both reliability and longevity under demanding conditions.\n\u003c\/p\u003e\n\u003ch4\u003e\n \u003cstrong\u003e\n Unmatched Efficiency in Cooling\n \u003c\/strong\u003e\n\u003c\/h4\u003e\n\u003cp\u003e\n Featuring a state-of-the-art PCB design optimized for heat dissipation, the C80A showcases a double-sided heat sink design that effectively reduces temperatures by 25% compared to similar products. This innovative design ensures that your ESC operates at optimal temperatures, maximizing efficiency and durability.\n\u003c\/p\u003e\n\u003ch4\u003e\n \u003cstrong\u003e\n Lightweight Powerhouse\n \u003c\/strong\u003e\n\u003c\/h4\u003e\n\u003cp\u003e\n One of the most striking features of the TMOTOR C80A is its power-to-weight ratio. Weighing a mere 31.2g, it boasts a power density of 92.3W\/g, marking a 51% increase over competing models. This exceptional ratio makes it an ideal choice for drone enthusiasts and professionals seeking a lightweight yet powerful ESC.\n\u003c\/p\u003e\n\u003ch4\u003e\n \u003cstrong\u003e\n Enhanced Control with Accurate Dead Time Tuning\n \u003c\/strong\u003e\n\u003c\/h4\u003e\n\u003cp\u003e\n Precision in control is key in drone operation, and the C80A excels in this regard with its accurate dead time tuning. This feature significantly enhances the ESC's response speed, providing pilots with more precise and responsive control over their drones.\n\u003c\/p\u003e\n\u003ch4\u003e\n \u003cstrong\u003e\n Robust PCB Design\n \u003c\/strong\u003e\n\u003c\/h4\u003e\n\u003cp\u003e\n Emphasizing durability, the C80A is equipped with a high copper thickness, multi-layer PCB design. The 3OZ six-layer PCB is meticulously crafted to reduce wire loss, ensuring efficient power distribution and extended lifespan of the ESC.\n\u003c\/p\u003e\n\u003ch2\u003e\n Specifications at a Glance\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n \u003cstrong\u003e\n Input Voltage\n \u003c\/strong\u003e\n : 5-12S\n \u003c\/li\u003e\n \u003cli\u003e\n \u003cstrong\u003e\n BEC\n \u003c\/strong\u003e\n : None\n \u003c\/li\u003e\n \u003cli\u003e\n \u003cstrong\u003e\n Weight\n \u003c\/strong\u003e\n : 32g\n \u003c\/li\u003e\n \u003cli\u003e\n \u003cstrong\u003e\n Current\n \u003c\/strong\u003e\n : Continuous 80A, Peak 100A\n \u003c\/li\u003e\n \u003cli\u003e\n \u003cstrong\u003e\n Dimensions\n \u003c\/strong\u003e\n : 55x28x10mm\n \u003c\/li\u003e\n \u003cli\u003e\n \u003cstrong\u003e\n Firmware\n \u003c\/strong\u003e\n : BLHeli_32\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n In the Box\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n 1x Cine80A ESC\n \u003c\/li\u003e\n \u003cli\u003e\n 2x Power Cable\n \u003c\/li\u003e\n \u003cli\u003e\n 1x Signal Cable\n \u003c\/li\u003e\n \u003cli\u003e\n 2x Capacitor\n \u003c\/li\u003e\n \u003cli\u003e\n 1x Capacitor Board\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n Key Features\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n Supports up to 12S voltage\n \u003c\/li\u003e\n \u003cli\u003e\n Continuous 80A load capability\n \u003c\/li\u003e\n \u003cli\u003e\n Exceptional weight of just 31.2g\n \u003c\/li\u003e\n \u003cli\u003e\n Efficient PCB design for superior heat dissipation\n \u003c\/li\u003e\n \u003cli\u003e\n Reduced wire loss for enhanced performance\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n Ideal for Velox Motors\n\u003c\/h2\u003e\n\u003cp\u003e\n Specially designed for compatibility with Velox 3115\/3120 motors, the TMOTOR C80A 5-12S Single ESC is the perfect companion for your high-performance drone setup. Its combination of lightweight design, efficient cooling, and precise control tuning makes it a top choice for drone enthusiasts and professionals alike.\n\u003c\/p\u003e\n\u003cp\u003e\n Elevate your drone's performance with the TMOTOR C80A 5-12S Single ESC, where power meets precision in a compact and efficient package.\n\u003c\/p\u003e\n","brand":"T-Motor","offers":[{"title":"Default Title","offer_id":56578338062717,"sku":"TM-X1C80A","price":105.42,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/TM-Cine80A-ESC-4.jpg?v=1753831857"},{"product_id":"tmotor-velox-v45a-lite-v2-4in1-esc","title":"Tmotor Velox V45A Lite V2 4in1 ESC","description":"\u003cp\u003e\n Do you feel the need... the need for FPV speed? Well, it's your lucky day, fellow propeller-head! Unleash the full potential of your flight controller and transcend the boundaries of the drone universe with our elite Tmotor Velox V45A Lite V2 4in1 ESC!\n\u003c\/p\u003e\n\u003cp\u003e\n Fasten your seatbelts and brace for a blast! The Tmotor Velox V45A Lite V2 4in1 ESC is a compact powerhouse that amps up your flight experience with jaw-dropping specs and unmatched performance.\n\u003c\/p\u003e\n\u003cp\u003e\n Designed for maximum efficiency and power delivery, this superb ESC features a robust BLHeli_S firmware. Feeling adventurous? You can always give it a turbo boost by flashing the ESC with the Bluejay firmware, unlocking the fun and functionality of BLHeli_32. Either way, your flight is destined for an unparalleled thrill ride!\n\u003c\/p\u003e\n\u003cp\u003e\n Optimised for a 3-6S input voltage, the Tmotor Velox V45A can handle a steady 4x 45A current, spiking to a peak of 4x 55A for when you need that extra oomph! It's like strapping a lightning bolt to your quad! Light as a feather and tough as nails, it weighs only 13g, ensuring your drone stays speedy and sprightly in the sky.\n\u003c\/p\u003e\n\u003cp\u003e\n Ready for liftoff? Equip your drone with the Tmotor Velox V45A Lite V2 4in1 ESC today. Ride the storm, rule the sky!\n\u003c\/p\u003e\n\u003ch2\u003e\n Specifications\n\u003c\/h2\u003e\n\u003col\u003e\n \u003cli\u003e\n BLHeli_S Firmware - for a smooth and responsive flight experience.\n \u003c\/li\u003e\n \u003cli\u003e\n Optional Bluejay Firmware Flash - for a taste of the BLHeli_32 adventure.\n \u003c\/li\u003e\n \u003cli\u003e\n 3-6S Input Voltage - to accommodate a broad range of drone models.\n \u003c\/li\u003e\n \u003cli\u003e\n 4x 45A Current (4x 55A Peak) - for a power-packed, exhilarating flight.\n \u003c\/li\u003e\n \u003cli\u003e\n Lightweight (13g) - your drone stays nimble and agile, unrestricted by weight.\n \u003c\/li\u003e\n \u003cli\u003e\n Easy Mounting (30.5) - for a fuss-free setup, letting you get back in the air swiftly!\n \u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\n So, UK FPV pilots, what are you waiting for? Add the Tmotor Velox V45A Lite V2 4in1 ESC to your cart now and let the flight adventure begin!\n\u003c\/p\u003e\n\u003cp\u003e\n \u003c\/p\u003e\u003cdiv style=\"position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; margin: 10px 0;\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/yEDhnBUFQNI\" frameborder=\"0\" allowfullscreen style=\"position: absolute; top: 0; left: 0; width: 100%; height: 100%;\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\u0026amp;feature=emb_title\n\n\u003cp\u003e\n \n\u003c\/p\u003e\n","brand":"T-Motor","offers":[{"title":"Default Title","offer_id":56578338521469,"sku":"TM-V45-LT","price":41.19,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/V45-Lite-ESC-5.jpg?v=1753831870"},{"product_id":"pixhawk-6c-autopilot-kit","title":"Pixhawk 6C Autopilot Kit","description":"\u003cp\u003eIntroducing the Pixhawk® 6C, the latest addition to the highly successful family of Pixhawk® flight controllers. This cutting-edge technology is based on the Pixhawk® FMUv6C Open Standard and Connector Standard, and comes with the PX4 Autopilot® pre-installed, making it the perfect solution for controlling any autonomous vehicle, be it for academic or commercial applications.\u003c\/p\u003e\n\u003cp\u003eThe Pixhawk® 6C boasts a high-performance H7 microcontroller, manufactured by STMicroelectronics® and paired with sensor technology from Bosch® \u0026amp; InvenSense®. The Arm® Cortex®-M7 core runs at a clock speed of up to 480 MHz, with 2MB flash memory and 1MB RAM. This updated processing power makes the Pixhawk® 6C a developers' dream, allowing for even more complex algorithms and models.\u003c\/p\u003e\n\u003cp\u003eThe FMUv6C open standard includes high-performance, low-noise IMUs on board, designed with cost-effectiveness in mind. The IMUs are temperature-controlled by onboard heating resistors, ensuring the optimum working temperature for accurate readings. The Pixhawk® 6C also features a newly designed integrated vibration isolation system, filtering out high-frequency vibrations and reducing noise to ensure the most accurate readings possible.\u003c\/p\u003e\n\u003cp\u003eThe low-profile form factor of the Pixhawk® 6C makes it perfect for use in a variety of applications, while the redundant IMUs from Bosch® \u0026amp; InvenSense® provide peace of mind, ensuring reliable performance at all times. This flight controller is the perfect choice for developers at corporate research labs, startups, academics (research, professors, students), and commercial applications.\u003c\/p\u003e\n\u003cp\u003eWe offer the Pixhawk® 6C in two different case options. The lower-cost plastic case option is a great choice for those looking for a cost-effective solution. For those looking for a more premium experience, we also offer a case with a sleek aluminum CNC finish. Please contact us for more information about the CNC case, MOQ applies. Choose the option that best fits your needs and start experiencing the power and performance of the Pixhawk® 6C today!\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" class=\"alignnone size-full wp-image-699540\" height=\"2048\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/Pixhawk6CSampleWiringDiagram_2048x2048_e37b6e59-c932-4ce1-8312-a85635790e4a.jpg?v=1754235401\" width=\"1496\"\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eHigh performance H7 Processor with clock speed up to 480 MHz\u003c\/li\u003e\n\u003cli\u003eNew cost-effective design with low-profile form factor\u003c\/li\u003e\n\u003cli\u003eRedundant inertial measurement unit (IMU) from Bosch® \u0026amp; InvenSense®\u003c\/li\u003e\n\u003cli\u003eNewly designed integrated vibration isolation system to filter out high frequency vibration and reduce noise to ensure accurate readings\u003c\/li\u003e\n\u003cli\u003eIMUs are temperature-controlled by onboard heating resistors, allowing optimum working temperature of IMUs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cp\u003eProcessors \u0026amp; Sensors\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFMU Processor: STM32H743\n\u003cul\u003e\n\u003cli\u003e32 Bit Arm® Cortex®-M7, 480MHz, 2MB memory, 1MB SRAM\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eIO Processor: STM32F103\n\u003cul\u003e\n\u003cli\u003e32 Bit Arm® Cortex®-M3, 72MHz, 64KB SRAM\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eOn-board sensors\n\u003cul\u003e\n\u003cli\u003eAccel\/Gyro: ICM-42688-P\u003c\/li\u003e\n\u003cli\u003eAccel\/Gyro: BMI055\u003c\/li\u003e\n\u003cli\u003eMag: IST8310\u003c\/li\u003e\n\u003cli\u003eBarometer: MS5611\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eElectrical data\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eVoltage Ratings:\n\u003cul\u003e\n\u003cli\u003eMax input voltage: 6V\u003c\/li\u003e\n\u003cli\u003eUSB Power Input: 4.75~5.25V\u003c\/li\u003e\n\u003cli\u003eServo Rail Input: 0~36V\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eCurrent Ratings:\n\u003cul\u003e\n\u003cli\u003eTelem1 Max output current limiter: 1.5A\u003c\/li\u003e\n\u003cli\u003eAll other port combined output current limiter: 1.5A\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMechanical data\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDimensions: 84.8 * 44 * 12.4 mm\u003c\/li\u003e\n\u003cli\u003eWeight (Aluminum Case) : 59.3g\u003c\/li\u003e\n\u003cli\u003eWeight (Plastic Case) : 34.6g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eInterfaces\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e16- PWM servo outputs (8 from IO, 8 from FMU)\u003c\/li\u003e\n\u003cli\u003e3 general purpose serial ports\n\u003cul\u003e\n\u003cli\u003eTelem1 - Full flow control, separate 1.5A current limit\u003c\/li\u003e\n\u003cli\u003eTelem2 - Full flow control\u003c\/li\u003e\n\u003cli\u003eTelem3\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e2 GPS ports\n\u003cul\u003e\n\u003cli\u003eGPS1 - Full GPS port (GPS plus safety switch)\u003c\/li\u003e\n\u003cli\u003eGPS2 - Basic GPS port\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e1 I2C port\n\u003cul\u003e\n\u003cli\u003eSupports dedicated I2C calibration EEPROM located on sensor module\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e2 CAN Buses\u003c\/li\u003e\n\u003cli\u003e2 Debug port\n\u003cul\u003e\n\u003cli\u003eFMU Debug\u003c\/li\u003e\n\u003cli\u003eI\/O Debug\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eDedicated R\/C input for Spektrum \/ DSM and S.BUS, CPPM, analog \/ PWM RSSI\u003c\/li\u003e\n\u003cli\u003eDedicated S.BUS output\u003c\/li\u003e\n\u003cli\u003e2 Power input ports (Analog)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eOther Characteristics\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOperating temperature: -40 ~ 85°c\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eIncluded\u003c\/h2\u003e\n\u003cp\u003eStandard Set\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePixhawk 6C Flight Controller Module\u003c\/li\u003e\n\u003cli\u003ePM03 or PM07 Power Module\u003c\/li\u003e\n\u003cli\u003eCable Set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eStandard Set + M10 GPS\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePixhawk 6C Flight Controller Module\u003c\/li\u003e\n\u003cli\u003ePM03 or PM07 Power Module\u003c\/li\u003e\n\u003cli\u003eCable Set\u003c\/li\u003e\n\u003cli\u003eM10 GPS\/Compass Module\u003cbr\u003e\u003cbr\u003e\u003cstrong style=\"font-size: 0.875rem;\"\u003e\u003cspan\u003ePM07 versions:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e The CAP\u0026amp;ADC-in pin headers visible in some product images may not be fitted to the PM07 board supplied; the connection may have unpopulated through-holes instead. If your build requires pre-fitted headers, please contact us before ordering so we can check the available unit.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/docs.holybro.com\/autopilot\/pixhawk-6c\" rel=\"nofollow noopener\" target=\"_blank\"\u003e Pixhawk 6C Wiki\/Documentation \u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"HolyBro","offers":[{"title":"w\/ PM07 + M10 GPS","offer_id":56578341634429,"sku":"H20254","price":209.9,"currency_code":"GBP","in_stock":false},{"title":"w\/ PM02V3","offer_id":56578341667197,"sku":"H20183","price":154.9,"currency_code":"GBP","in_stock":true},{"title":"w\/ PM07","offer_id":56578341699965,"sku":"H20185","price":174.9,"currency_code":"GBP","in_stock":false},{"title":"w\/ PM02V3 + M10 GPS","offer_id":56578341732733,"sku":"H20232","price":189.9,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/f4c2685e29.webp?v=1753831881"},{"product_id":"goku-gn-405s-20a-aio-icm42688-25-5-x-25-5","title":"GOKU GN 405S 20A AIO (ICM42688) 25.5 X 25.5","description":"\u003ch3\u003e\n Flywoo GOKU GN 405S 20A AIO (ICM42688) - Power-Packed All-in-One Flight Controller for FPV\n\u003c\/h3\u003e\n\u003cp\u003e\n \u003cstrong\u003e\n Overview\n \u003c\/strong\u003e\n\u003c\/p\u003e\n\u003cp\u003e\n The\n \u003cstrong\u003e\n Flywoo GOKU GN 405S 20A AIO\n \u003c\/strong\u003e\n is a feature-packed,\n \u003cstrong\u003e\n economical\n \u003c\/strong\u003e\n , and\n \u003cstrong\u003e\n durable\n \u003c\/strong\u003e\n all-in-one flight controller designed to meet the needs of FPV enthusiasts who demand both performance and versatility. Built around the powerful\n \u003cstrong\u003e\n F405 MCU\n \u003c\/strong\u003e\n , this AIO integrates a host of features, including a\n \u003cstrong\u003e\n barometer\n \u003c\/strong\u003e\n ,\n \u003cstrong\u003e\n black box\n \u003c\/strong\u003e\n ,\n \u003cstrong\u003e\n WS2812 LED\n \u003c\/strong\u003e\n , and\n \u003cstrong\u003e\n 6 UARTs\n \u003c\/strong\u003e\n , offering exceptional flexibility for custom builds.\n\u003c\/p\u003e\n\u003cp\u003e\n With\n \u003cstrong\u003e\n 20A 8-bit ESCs\n \u003c\/strong\u003e\n ,\n \u003cstrong\u003e\n BLHELI_S support\n \u003c\/strong\u003e\n , and compatibility with up to\n \u003cstrong\u003e\n 6S Lipo batteries\n \u003c\/strong\u003e\n , the GN 405S is built to handle a variety of flight demands, whether you're flying freestyle, racing, or cruising long-range. Its\n \u003cstrong\u003e\n ICM42688 IMU\n \u003c\/strong\u003e\n ensures smooth and accurate flight performance, while the onboard\n \u003cstrong\u003e\n 5V BEC\n \u003c\/strong\u003e\n and\n \u003cstrong\u003e\n current sensor\n \u003c\/strong\u003e\n make sure your electronics stay powered and monitored. For logging and tuning, the\n \u003cstrong\u003e\n 8MB black box\n \u003c\/strong\u003e\n keeps all the essential flight data at your fingertips.\n\u003c\/p\u003e\n\u003ch3\u003e\n Features\n\u003c\/h3\u003e\n\u003cul\u003e\n \u003cli\u003e\n \u003cstrong\u003e\n F405 BGA MCU\n \u003c\/strong\u003e\n for powerful processing\n \u003c\/li\u003e\n \u003cli\u003e\n Built-in\n \u003cstrong\u003e\n barometer\n \u003c\/strong\u003e\n (SPL06) for altitude tracking\n \u003c\/li\u003e\n \u003cli\u003e\n \u003cstrong\u003e\n 5V BEC\n \u003c\/strong\u003e\n for powering external devices (2.0A max)\n \u003c\/li\u003e\n \u003cli\u003e\n \u003cstrong\u003e\n Onboard LED\n \u003c\/strong\u003e\n : 4x\n \u003cstrong\u003e\n WS2812 LEDs\n \u003c\/strong\u003e\n for status indication\n \u003c\/li\u003e\n \u003cli\u003e\n Integrated\n \u003cstrong\u003e\n 20A 8-bit ESCs\n \u003c\/strong\u003e\n with BLHELI_S firmware\n \u003c\/li\u003e\n \u003cli\u003e\n \u003cstrong\u003e\n 6 UARTs\n \u003c\/strong\u003e\n for ultimate connectivity:\n \u003cul\u003e\n \u003cli\u003e\n Supports\n \u003cstrong\u003e\n SBUS\n \u003c\/strong\u003e\n ,\n \u003cstrong\u003e\n iBus\n \u003c\/strong\u003e\n ,\n \u003cstrong\u003e\n Spektrum\n \u003c\/strong\u003e\n , and\n \u003cstrong\u003e\n Crossfire\n \u003c\/strong\u003e\n receivers\n \u003c\/li\u003e\n \u003cli\u003e\n \u003cstrong\u003e\n PPM\n \u003c\/strong\u003e\n and\n \u003cstrong\u003e\n PWM\n \u003c\/strong\u003e\n receivers are not supported\n \u003c\/li\u003e\n \u003c\/ul\u003e\n \u003c\/li\u003e\n \u003cli\u003e\n \u003cstrong\u003e\n 8MB black box\n \u003c\/strong\u003e\n for flight data logging\n \u003c\/li\u003e\n \u003cli\u003e\n \u003cstrong\u003e\n Current sensor\n \u003c\/strong\u003e\n for real-time power monitoring\n \u003c\/li\u003e\n \u003cli\u003e\n Compact and lightweight: Weighs just\n \u003cstrong\u003e\n 8.5g\n \u003c\/strong\u003e\n \u003c\/li\u003e\n \u003cli\u003e\n Compatible with\n \u003cstrong\u003e\n 2-6S LiPo\n \u003c\/strong\u003e\n batteries for power flexibility\n \u003c\/li\u003e\n \u003cli\u003e\n \u003cstrong\u003e\n BLHELI_S\n \u003c\/strong\u003e\n firmware supports\n \u003cstrong\u003e\n PWM\n \u003c\/strong\u003e\n ,\n \u003cstrong\u003e\n Oneshot125\n \u003c\/strong\u003e\n ,\n \u003cstrong\u003e\n Oneshot42\n \u003c\/strong\u003e\n ,\n \u003cstrong\u003e\n Multishot\n \u003c\/strong\u003e\n , and\n \u003cstrong\u003e\n DShot150\/300\/600\n \u003c\/strong\u003e\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\n Specifications\n\u003c\/h3\u003e\n\u003cul\u003e\n \u003cli\u003e\n \u003cstrong\u003e\n MCU:\n \u003c\/strong\u003e\n STM32F405 BGA\n \u003c\/li\u003e\n \u003cli\u003e\n \u003cstrong\u003e\n IMU:\n \u003c\/strong\u003e\n ICM42688\n \u003c\/li\u003e\n \u003cli\u003e\n \u003cstrong\u003e\n Barometer:\n \u003c\/strong\u003e\n SPL06\n \u003c\/li\u003e\n \u003cli\u003e\n \u003cstrong\u003e\n LED:\n \u003c\/strong\u003e\n 4x WS2812\n \u003c\/li\u003e\n \u003cli\u003e\n \u003cstrong\u003e\n Black Box:\n \u003c\/strong\u003e\n 8MB for logging\n \u003c\/li\u003e\n \u003cli\u003e\n \u003cstrong\u003e\n Power Output:\n \u003c\/strong\u003e\n \u003cul\u003e\n \u003cli\u003e\n \u003cstrong\u003e\n 5V:\n \u003c\/strong\u003e\n 2.0A max\n \u003c\/li\u003e\n \u003cli\u003e\n \u003cstrong\u003e\n 3.3V:\n \u003c\/strong\u003e\n 0.5A max\n \u003c\/li\u003e\n \u003c\/ul\u003e\n \u003c\/li\u003e\n \u003cli\u003e\n \u003cstrong\u003e\n ESC:\n \u003c\/strong\u003e\n 20A continuous current,\n \u003cstrong\u003e\n 8-bit\n \u003c\/strong\u003e\n \u003c\/li\u003e\n \u003cli\u003e\n \u003cstrong\u003e\n Input Voltage:\n \u003c\/strong\u003e\n 2-6S Lipo\n \u003c\/li\u003e\n \u003cli\u003e\n \u003cstrong\u003e\n Dimensions:\n \u003c\/strong\u003e\n 33.5 x 33.5mm\n \u003c\/li\u003e\n \u003cli\u003e\n \u003cstrong\u003e\n Mounting Holes:\n \u003c\/strong\u003e\n 25.5mm\/26.5mm square to center\n \u003c\/li\u003e\n \u003cli\u003e\n \u003cstrong\u003e\n Weight:\n \u003c\/strong\u003e\n 8.5g\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\n What's in the Box\n\u003c\/h3\u003e\n\u003cul\u003e\n \u003cli\u003e\n 1x Flywoo GOKU GN 405S 20A AIO Flight Controller\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n \u003cem\u003e\n Note: Accessories may vary depending on supply.\n \u003c\/em\u003e\n\u003c\/p\u003e\n","brand":"Flywoo","offers":[{"title":"Default Title","offer_id":56578339864957,"sku":"FC405AICM","price":77.8,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/GOKU-GN-405S-20A-AIO-ICM42688-25.5-X-25.5.png?v=1753831881"},{"product_id":"emax-nanoscout-aio-flight-controller-elrs-6a-vtx","title":"Emax Nanoscout AIO Flight Controller ELRS, 6A, VTX","description":"\u003ch2 data-end=\"360\" data-start=\"268\"\u003e\n \u003cstrong data-end=\"358\" data-start=\"271\"\u003e\n Emax Tinyhawk Nanoscout Spare Parts Pack C - All-in-One AIO FC, ESC \u0026amp; ELRS Receiver\n \u003c\/strong\u003e\n\u003c\/h2\u003e\n\u003cp data-end=\"894\" data-start=\"362\"\u003e\n When your\n \u003cstrong data-end=\"394\" data-start=\"372\"\u003e\n Tinyhawk Nanoscout\n \u003c\/strong\u003e\n needs a brain transplant, this\n \u003cstrong data-end=\"530\" data-start=\"426\"\u003e\n All-in-One Flight Controller (FC), Electronic Speed Controller (ESC), and ExpressLRS (ELRS) Receiver\n \u003c\/strong\u003e\n has everything you need to get back in the air. Engineered for seamless integration, this AIO board is the beating heart of your micro drone, ensuring smooth, stable flight control with high-speed response. Whether you're replacing a damaged board or upgrading your setup, this pack delivers reliability, precision, and ultra-low latency for serious FPV action.\n\u003c\/p\u003e\n\u003ch3 data-end=\"943\" data-start=\"896\"\u003e\n \u003cstrong data-end=\"941\" data-start=\"900\"\u003e\n Why Upgrade to the Emax AIO FC \u0026amp; ESC?\n \u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003cul data-end=\"1607\" data-start=\"944\"\u003e\n \u003cli data-end=\"1052\" data-start=\"944\"\u003e\n \u003cstrong data-end=\"972\" data-start=\"946\"\u003e\n All-in-One (AIO) Board\n \u003c\/strong\u003e\n - Combines the flight controller, ESC, and ELRS receiver in one compact unit.\n \u003c\/li\u003e\n \u003cli data-end=\"1161\" data-start=\"1053\"\u003e\n \u003cstrong data-end=\"1085\" data-start=\"1055\"\u003e\n ExpressLRS (ELRS) Receiver\n \u003c\/strong\u003e\n - Ultra-low latency, long-range performance, and rock-solid connectivity.\n \u003c\/li\u003e\n \u003cli data-end=\"1268\" data-start=\"1162\"\u003e\n \u003cstrong data-end=\"1204\" data-start=\"1164\"\u003e\n Optimized for the Tinyhawk Nanoscout\n \u003c\/strong\u003e\n - Drop-in replacement, no messy rewiring or guesswork needed.\n \u003c\/li\u003e\n \u003cli data-end=\"1379\" data-start=\"1269\"\u003e\n \u003cstrong data-end=\"1299\" data-start=\"1271\"\u003e\n Reliable ESC Performance\n \u003c\/strong\u003e\n - Efficient power delivery for smooth throttle response and flight stability.\n \u003c\/li\u003e\n \u003cli data-end=\"1485\" data-start=\"1380\"\u003e\n \u003cstrong data-end=\"1414\" data-start=\"1382\"\u003e\n Lightweight \u0026amp; Durable Design\n \u003c\/strong\u003e\n - Keeps your micro drone nimble while ensuring long-term durability.\n \u003c\/li\u003e\n \u003cli data-end=\"1607\" data-start=\"1486\"\u003e\n \u003cstrong data-end=\"1520\" data-start=\"1488\"\u003e\n Ideal for Repairs \u0026amp; Upgrades\n \u003c\/strong\u003e\n - Whether you're fixing a dead board or upgrading to ELRS, this kit has you covered.\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-end=\"1633\" data-start=\"1609\"\u003e\n \u003cstrong data-end=\"1631\" data-start=\"1613\"\u003e\n Specifications\n \u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003cul data-end=\"2034\" data-start=\"1634\"\u003e\n \u003cli data-end=\"1680\" data-start=\"1634\"\u003e\n \u003cstrong data-end=\"1654\" data-start=\"1636\"\u003e\n Compatibility:\n \u003c\/strong\u003e\n Emax Tinyhawk Nanoscout\n \u003c\/li\u003e\n \u003cli data-end=\"1745\" data-start=\"1681\"\u003e\n \u003cstrong data-end=\"1692\" data-start=\"1683\"\u003e\n Type:\n \u003c\/strong\u003e\n All-in-One Flight Controller + ESC + ELRS Receiver\n \u003c\/li\u003e\n \u003cli data-end=\"1839\" data-start=\"1746\"\u003e\n \u003cstrong data-end=\"1770\" data-start=\"1748\"\u003e\n Receiver Protocol:\n \u003c\/strong\u003e\n ExpressLRS (ELRS) for enhanced signal strength \u0026amp; ultra-low latency\n \u003c\/li\u003e\n \u003cli data-end=\"1902\" data-start=\"1840\"\u003e\n \u003cstrong data-end=\"1850\" data-start=\"1842\"\u003e\n ESC:\n \u003c\/strong\u003e\n Integrated, optimized for micro drone performance\n \u003c\/li\u003e\n \u003cli data-end=\"1968\" data-start=\"1903\"\u003e\n \u003cstrong data-end=\"1916\" data-start=\"1905\"\u003e\n Weight:\n \u003c\/strong\u003e\n Ultra-light for minimal impact on flight dynamics\n \u003c\/li\u003e\n \u003cli data-end=\"2034\" data-start=\"1969\"\u003e\n \u003cstrong data-end=\"1988\" data-start=\"1971\"\u003e\n Connectivity:\n \u003c\/strong\u003e\n Plug-and-play setup with Tinyhawk Nanoscout\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-end=\"2064\" data-start=\"2036\"\u003e\n \u003cstrong data-end=\"2062\" data-start=\"2040\"\u003e\n What's in the Box?\n \u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003cul data-end=\"2167\" data-start=\"2065\"\u003e\n \u003cli data-end=\"2131\" data-start=\"2065\"\u003e\n \u003cstrong data-end=\"2129\" data-start=\"2067\"\u003e\n 1x All-in-One (AIO) Flight Controller, ESC \u0026amp; ELRS Receiver\n \u003c\/strong\u003e\n \u003c\/li\u003e\n \u003cli data-end=\"2167\" data-start=\"2132\"\u003e\n \u003cstrong data-end=\"2165\" data-start=\"2134\"\u003e\n 1x Set of Mounting Hardware\n \u003c\/strong\u003e\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-end=\"2248\" data-start=\"2169\"\u003e\n \u003cem data-end=\"2246\" data-start=\"2169\"\u003e\n Disclaimer: Accessories included may vary depending on supply availability.\n \u003c\/em\u003e\n\u003c\/p\u003e\n","brand":"Emax","offers":[{"title":"Default Title","offer_id":56578352873853,"sku":"E0110003173","price":54.59,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/Emax-Nanoscout-AIO-Flight-Controller-ELRS-6A-VTX-1.webp?v=1753831940"},{"product_id":"happymodel-crazyf405hd-elrs-aio-12a-flight-controller","title":"Happymodel CrazyF405HD ELRS AIO 12A Flight Controller","description":"\u003cp\u003e\n \u003cstrong\u003e\n Introducing the Turbo-Boosted, Astro-Geared, Drone Driver\n \u003c\/strong\u003e\n\u003c\/p\u003e\n\u003cp\u003e\n Prepare for launch! Strap in for a joyride with the Happymodel CrazyF405HD ELRS 1-2S AIO FC - the cutting-edge flight controller that's turning heads in the drone world! But be warned, this isn't your grandma's flight controller. Built with a taste for adrenaline and an eye for precision, this aerial ace is for the tech-heads, the sky gazers, and the flight fanatics.\n\u003c\/p\u003e\n\u003cp\u003e\n Crafted with intricate care and surgical precision, this flight controller is loaded with a Serial ELRS receiver, 4-IN-1 Blheli_S 12A ESC, and a whole suite of other features that make your average flight controller look like a paper airplane. It's designed for Digital HD FPV, making it an excellent copilot for your Tinywhoop, Cinewhoop, Toothpick or any other small FPV drone. It makes flights smoother than a buttered pancake on a non-stick pan.\n\u003c\/p\u003e\n\u003cp\u003e\n Fed up with outdated analog OSD chips? The CrazyF405HD has tossed those aside like yesterday's newspaper. Its optimised PCB layout and support for 1-2S Lipo\/LiHV lithium batteries offer a quantum leap in performance. Plus, with Betaflight\/INAV firmware, BMP280 barometer, 8MB blackbox, and 3 full sets of UARTs, you're guaranteed a state-of-the-art flying experience.\n \u003cstrong\u003e\n Please note, we do not offer software level support for BetaFlight\/Inav\n \u003c\/strong\u003e\n\u003c\/p\u003e\n\u003cp\u003e\n To sum it up, the Happymodel CrazyF405HD is lighter than a feather, faster than a cheetah, and packed with more features than a Swiss army knife. It's designed to soar above and beyond ordinary controllers and take your flying experience to stratospheric heights.\n\u003c\/p\u003e\n\u003cp\u003e\n \u003cimg alt=\"\" class=\"alignnone size-full wp-image-674348\" height=\"526\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/Happymodel-CrazyF405-HD-4.jpg?v=1754233904\" width=\"1000\"\u003e\n\u003c\/p\u003e\n\u003ch2\u003e\n Key Features:\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n Brand: Happymodel\n \u003c\/li\u003e\n \u003cli\u003e\n Built-in Serial ExpressLRS 2.4G\n \u003c\/li\u003e\n \u003cli\u003e\n 4-in-1 Blheli_S 12A ESC\n \u003c\/li\u003e\n \u003cli\u003e\n Compatible with Betaflight\/INAV firmware\n \u003c\/li\u003e\n \u003cli\u003e\n Integrated BMP280 barometer and 8Mbp blackbox\n \u003c\/li\u003e\n \u003cli\u003e\n Power supply: 1-2S LiPo\/LiPo HV\n \u003c\/li\u003e\n \u003cli\u003e\n Firmware target: BetaflightF4\n \u003c\/li\u003e\n \u003cli\u003e\n Optimised PCB layout\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n \u003cimg alt=\"\" class=\"alignnone size-full wp-image-664951\" height=\"649\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/Happymodel-CrazyF405-AIO-ELRS-FC-2.jpg?v=1754233906\" width=\"1000\"\u003e\n\u003c\/p\u003e\n\u003ch2\u003e\n Specifications:\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n Model: CrazyF405HD ELRS 1-2S AIO Flight controller\n \u003c\/li\u003e\n \u003cli\u003e\n Mount size: 25.5mmx25.5mm\n \u003c\/li\u003e\n \u003cli\u003e\n Weight: 4.8g (excluding power lead wire)\n \u003c\/li\u003e\n \u003cli\u003e\n Supports 1-2s Lipo\/LiHV battery\n \u003c\/li\u003e\n \u003cli\u003e\n Firmware target: BetaflightF4\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ctable width=\"750\"\u003e\n \u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd width=\"164\"\u003e\n \u003cstrong\u003e\n Flight controller\n \u003c\/strong\u003e\n \u003c\/td\u003e\n \u003ctd width=\"586\"\u003e\n MCU: STM32F405RGT6 (168MHZ, 1Mbyte FLASH)\n \u003cbr\u003e\n GYRO Sensor: BMI270 (SPI connection)\n \u003cbr\u003e\n Mount hole size: 25.5mm*25.5mm\n \u003cbr\u003e\n Power supply: 1-2S battery input (DC 2.9V-8.7V)\n \u003cbr\u003e\n Built-in 12A(each) Blheli_S 4in1 ESC\n \u003cbr\u003e\n Built-in Serial ExpressLRS 2.4GBuilt-in BMP280 Barometer\n \u003cbr\u003e\n Built-in 8MBp blackbox\n \u003cbr\u003e\n Built-in voltage meter sensor , voltage meter scale 110Built-in current meter sensor , current meter scale 470\n \u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd width=\"164\"\u003e\n \u003cstrong\u003e\n Onboard 4in1 ESC\n \u003c\/strong\u003e\n \u003c\/td\u003e\n \u003ctd width=\"586\"\u003e\n Power supply: 1-2S LiPo\/LiPo HV\n \u003cbr\u003e\n Current: 12A continuous peak 15A (3 seconds)\n \u003cbr\u003e\n Support BLHeli_S Bluejay firmware\n \u003cbr\u003e\n Factory firmware: Bluejay ESC V0.19Firmware target: Z-H-30\n \u003cbr\u003e\n Default protocol: DSHOT300\n \u003cbr\u003e\n When use 1s battery and high KV 0702\/0802 motors, should set startup power to 1100\/1200\n \u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd width=\"164\"\u003e\n \u003cstrong\u003e\n Onboard UART ExpressLRS 2.4GHz Receiver\n \u003c\/strong\u003e\n \u003c\/td\u003e\n \u003ctd width=\"586\"\u003e\n Packet Rate option: 25Hz\/50Hz\/150Hz\/250Hz\/500Hz\n \u003cbr\u003e\n RF Frequency: 2.4GHz\n \u003cbr\u003e\n Antenna: enameled copper wire 31mm length\n \u003cbr\u003e\n Telemetry output Power: \u0026lt;12dBm\n \u003cbr\u003e\n Default firmware version: ExpressLRS V3.0.1\n \u003cbr\u003e\n Firmware target: HappyModel EP 2400 RX\n \u003cbr\u003e\n Could update firmware via ExpressLRS configurator\n \u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\n So, don't just stand there! Grab the controller that's rewriting the rules and get ready to unleash the pilot within. This is Happymodel CrazyF405HD - your ticket to the skies.\n\u003c\/p\u003e\n\u003ch2\u003e\n Included\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n 1x CrazyF405 Flight Controller\n \u003c\/li\u003e\n \u003cli\u003e\n 1x Accesories Kit (contents may vary based on supply)\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cblockquote\u003e\n \u003cp\u003e\n For original factory 4.3.2 version firmware, if you want to use BMP280 barometer, please connect to betaflight configurator and then move to CLI command, then type the following command:\n \u003c\/p\u003e\n \u003cdiv\u003e\n resource I2C_SCL 2 B10\n \u003cbr\u003e\n resource I2C_SDA 2 B11\n \u003cbr\u003e\n set baro_bustype = I2C\n \u003cbr\u003e\n set baro_i2c_device = 2\n \u003c\/div\u003e\n \u003cdiv\u003e\n save\n \u003c\/div\u003e\n \u003cdiv\u003e\n \u003c\/div\u003e\n \u003cdiv\u003e\n If you upgrade the firmware to 4.4.2 and want to use BMP280 barometer, please add BPM280 support to custom defines, following the procedure:\n \u003c\/div\u003e\n \u003cdiv\u003e\n 1. Enable expert mode on firmware flasher tab\n \u003cbr\u003e\n 2. Add BARO_BMP280 to custom defines\n \u003cbr\u003e\n 3. Flash the board\n \u003cbr\u003e\n 4.Configure resources for external BARO device for the flight controller in CLl:\n \u003c\/div\u003e\n \u003cdiv\u003e\n \u003c\/div\u003e\n \u003cdiv\u003e\n \u003cdiv\u003e\n resource I2C_SCL 2 B10\n \u003cbr\u003e\n resource I2C_SDA 2 B11\n \u003cbr\u003e\n set baro_bustype = I2C\n \u003cbr\u003e\n set baro_i2c_device = 2\n \u003c\/div\u003e\n \u003cdiv\u003e\n save\n \u003c\/div\u003e\n \u003c\/div\u003e\n\u003c\/blockquote\u003e\n\u003cdiv\u003e\n\u003c\/div\u003e\n","brand":"HappyModel","offers":[{"title":"Default Title","offer_id":56578356117885,"sku":"HM-1H60023","price":40.64,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/Happymodel-CrazyF405-AIO-ELRS-FC-5.jpg?v=1753831953"},{"product_id":"mamba-interference-shielding-fpc","title":"Mamba Interference Shielding FPC","description":"\u003cp\u003e\n Mamba interference shielding FPC Instructions\n\u003c\/p\u003e\n\u003cul\u003e\n \u003cli\u003e\n Get as close to the FC board as possible\n \u003c\/li\u003e\n \u003cli\u003e\n Maintain ESC Cool Airflow\n \u003c\/li\u003e\n \u003cli\u003e\n Do not damage the FPC surface coating\n \u003c\/li\u003e\n \u003cli\u003e\n Only connect 1 GND from FC ，is ok\n \u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"Diatone","offers":[{"title":"Default Title","offer_id":56578356838781,"sku":"MB-PWH-SHIELD-FPC","price":1.55,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/Mamba-FPC.jpg?v=1753831967"},{"product_id":"iflight-blitz-f745-flight-controller","title":"Iflight BLITZ F745 Flight Controller","description":"\u003cp\u003e\n Are you tired of fiddling with soldering irons and tangled wires every time you upgrade your quad? Say hello to the next-gen iFlight Blitz F745 Flight Controller, where sophistication meets simplicity, and the only thing that's 'high' is your drone - not your stress levels.\n\u003c\/p\u003e\n\u003cp\u003e\n \u003cstrong\u003e\n Why It's Not Just Another Flight Controller:\n \u003c\/strong\u003e\n\u003c\/p\u003e\n\u003cul\u003e\n \u003cli\u003e\n \u003cstrong\u003e\n Improved Circuit Design:\n \u003c\/strong\u003e\n Because nobody likes a noisy neighbor, especially when it's your own quad buzzing with electrical noise.\n \u003c\/li\u003e\n \u003cli\u003e\n \u003cstrong\u003e\n DJI HD VTX Connector:\n \u003c\/strong\u003e\n Plug-and-play because we're in 2024, not the Stone Age. Soldering? Please, that's so last decade.\n \u003c\/li\u003e\n \u003cli\u003e\n \u003cstrong\u003e\n FC Indicator LEDs:\n \u003c\/strong\u003e\n It's like your quad is communicating with you through lights. \"All systems go\" or \"Houston, we have a problem\" - you'll know at a glance.\n \u003c\/li\u003e\n \u003cli\u003e\n \u003cstrong\u003e\n Firmware Flexibility:\n \u003c\/strong\u003e\n Whether you're a Betaflight believer, an INAV enthusiast, or an Ardupilot aficionado, we've got you covered.\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n \u003cstrong\u003e\n Spec-tacular Specifications:\n \u003c\/strong\u003e\n\u003c\/p\u003e\n\u003cul\u003e\n \u003cli\u003e\n MCU: STM32F745\n \u003c\/li\u003e\n \u003cli\u003e\n Gyro: ICM42688\n \u003c\/li\u003e\n \u003cli\u003e\n Barometer: DPS310\n \u003c\/li\u003e\n \u003cli\u003e\n OSD Chip: AT7456E\n \u003c\/li\u003e\n \u003cli\u003e\n Flash: 32MB (Blackbox flash)\n \u003c\/li\u003e\n \u003cli\u003e\n UARTS: 6\n \u003c\/li\u003e\n \u003cli\u003e\n Smartaudio \/ IRC Tramp VTX protocol supported\n \u003c\/li\u003e\n \u003cli\u003e\n LED controller: Yes\n \u003c\/li\u003e\n \u003cli\u003e\n Beeper pad: Yes\n \u003c\/li\u003e\n \u003cli\u003e\n Firmware target: IFLIGHT_BLITZ_F7_AIO\n \u003c\/li\u003e\n \u003cli\u003e\n Mount pattern: 30.5*30.5mm\n \u003c\/li\u003e\n \u003cli\u003e\n Dimensions: 36.5*35 mm\n \u003c\/li\u003e\n \u003cli\u003e\n Weight: 7.8g\n \u003c\/li\u003e\n \u003cli\u003e\n BEC: 5V 2.5A \/ 9V 2A\n \u003c\/li\u003e\n \u003cli\u003e\n UART 1 for VTX HD \/ Analog\n \u003c\/li\u003e\n \u003cli\u003e\n UART 2 for a Receiver\n \u003c\/li\u003e\n \u003cli\u003e\n UART 3\/4\/5 for GPS or other sensors that require a serial port\n \u003c\/li\u003e\n \u003cli\u003e\n UART 6 for ESC Telemetry\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n \u003cstrong\u003e\n What's in the Box:\n \u003c\/strong\u003e\n\u003c\/p\u003e\n\u003cul\u003e\n \u003cli\u003e\n 1x Blitz F745 Flight Controller (Yes, the star of the show!)\n \u003c\/li\u003e\n \u003cli\u003e\n 1x Hardware Set (Because we wouldn't leave you hanging!)\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n So, if you want to make your quad fly like it's got a degree in aerodynamics, the iFlight Blitz F745 Flight Controller is your ticket to the big leagues. It's not just an upgrade; it's an evolution. Get yours and let your quad soar like it's got a PhD in Awesome!\n\u003c\/p\u003e\n","brand":"iFlight RC","offers":[{"title":"Default Title","offer_id":56578358083965,"sku":"BF15391","price":49.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/BLITZ-F745-F1_1024x1024_64ba4cff-32cd-4c7e-91bf-aadcb7b7fed4.webp?v=1753831975"},{"product_id":"iflight-blitz-f745-e55a-30x30-flight-stack","title":"iFlight Blitz F745 + E55A 30x30 Flight Stack","description":"\u003cp\u003e\n \u003cstrong\u003e\n Unleash the Beast: BLITZ F745 E55 30x30 Stack by iFlight\n \u003c\/strong\u003e\n\u003c\/p\u003e\n\u003cp\u003e\n Tired of the same old drab drone stacks that promise the world but deliver a globe? Look no further! iFlight's BLITZ F745 E55 Stack is here to redefine your flight experience, infusing it with an electrifying blend of technology and sheer power that's as subtle as a sledgehammer at a tea party.\n\u003c\/p\u003e\n\u003cp\u003e\n \u003cstrong\u003e\n Main Features:\n \u003c\/strong\u003e\n\u003c\/p\u003e\n\u003cul\u003e\n \u003cli\u003e\n \u003cstrong\u003e\n Flight Controller Extraordinaire:\n \u003c\/strong\u003e\n At the heart of this technological marvel is the Blitz F745 flight controller, a maestro conducting the symphony of your drone's components with the grace of a caffeinated ballerina. It's powered by an STM32F745 MCU, because, let's face it, using anything less would be like putting bicycle wheels on a sports car.\n \u003c\/li\u003e\n \u003cli\u003e\n \u003cstrong\u003e\n Gyro \u0026amp; Barometer:\n \u003c\/strong\u003e\n With the ICM42688 gyro and DPS310 barometer, your drone will have more awareness of its surroundings than a cat in a room full of rocking chairs. Navigating the skies will be smoother than a pickpocket in a crowd.\n \u003c\/li\u003e\n \u003cli\u003e\n \u003cstrong\u003e\n Seamless Connectivity:\n \u003c\/strong\u003e\n The DJI HD plug\u0026amp;play connector is the epitome of convenience, eliminating the need for soldering. It's like having a USB port in a world of floppy disks.\n \u003c\/li\u003e\n \u003cli\u003e\n \u003cstrong\u003e\n Noise Reduction:\n \u003c\/strong\u003e\n Quality components that cut down on noise? Yes, please. Because the only thing we want to hear is the sound of awe from onlookers, not electrical buzz.\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n \u003cstrong\u003e\n ESC Details:\n \u003c\/strong\u003e\n\u003c\/p\u003e\n\u003cul\u003e\n \u003cli\u003e\n \u003cstrong\u003e\n Power Handling:\n \u003c\/strong\u003e\n The E55 4in1 ESC doesn't just handle power; it tames it. With a constant of 55 Amps and a burst of 60, it's like having a pet dragon under the hood - all the fire, none of the risk.\n \u003c\/li\u003e\n \u003cli\u003e\n \u003cstrong\u003e\n Compatibility:\n \u003c\/strong\u003e\n Supports a buffet of protocols including DShot150\/300\/600 and MultiShot. It's like being fluent in every language at the United Nations of Drones.\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n Specifications\n\u003c\/h2\u003e\n\u003ch3\u003e\n FC\n\u003c\/h3\u003e\n\u003cdiv class=\"col-md-6 caracteristique-hidden\"\u003e\n \u003cul\u003e\n \u003cli\u003e\n MCU: STM32F745\n \u003c\/li\u003e\n \u003cli\u003e\n Gyro: ICM42688\n \u003c\/li\u003e\n \u003cli\u003e\n Barometer: DPS310\n \u003c\/li\u003e\n \u003cli\u003e\n OSD Chip: AT7456E\n \u003c\/li\u003e\n \u003cli\u003e\n Flash: 32MB (Blackbox flash)\n \u003c\/li\u003e\n \u003cli\u003e\n UARTS: 6\n \u003c\/li\u003e\n \u003cli\u003e\n Smartaudio \/ IRC Tramp VTX protocol supported\n \u003c\/li\u003e\n \u003cli\u003e\n LED controller: Yes\n \u003c\/li\u003e\n \u003cli\u003e\n Beeper pad: Yes\n \u003c\/li\u003e\n \u003cli\u003e\n Firmware target: IFLIGHT_BLITZ_F7_AIO\n \u003c\/li\u003e\n \u003cli\u003e\n Mount pattern: 30.5*30.5mm\n \u003c\/li\u003e\n \u003cli\u003e\n Dimensions: 36.5*35 mm\n \u003c\/li\u003e\n \u003cli\u003e\n Weight: 7.8g\n \u003c\/li\u003e\n \u003cli\u003e\n BEC: 5V 2.5A \/ 9V 2A\n \u003c\/li\u003e\n \u003cli\u003e\n UART 1 for VTX HD \/ Analog\n \u003c\/li\u003e\n \u003cli\u003e\n UART 2 for a Receiver\n \u003c\/li\u003e\n \u003cli\u003e\n UART 3\/4\/5 for GPS or other sensors that require a serial port\n \u003c\/li\u003e\n \u003cli\u003e\n UART 6 for ESC Telemet\n \u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-md-6 caracteristique-hidden\"\u003e\n \u003ch3\u003e\n ESC\n \u003c\/h3\u003e\n \u003cul\u003e\n \u003cli\u003e\n Mounting Holes: 30.5*30.5mm\/Φ4mm\n \u003c\/li\u003e\n \u003cli\u003e\n Weight: 15.3g\n \u003c\/li\u003e\n \u003cli\u003e\n Supports 2-6S Lipo input\n \u003c\/li\u003e\n \u003cli\u003e\n MCU： G071\n \u003c\/li\u003e\n \u003cli\u003e\n Constant: 55 Amps\n \u003c\/li\u003e\n \u003cli\u003e\n Burst: 60 Amps\n \u003c\/li\u003e\n \u003cli\u003e\n Current sensor: Yes\n \u003c\/li\u003e\n \u003cli\u003e\n BEC: No\n \u003c\/li\u003e\n \u003cli\u003e\n Current rate: 200\n \u003c\/li\u003e\n \u003cli\u003e\n Supports: DShot DShot150\/300\/600\/MultiShot\/ OneShot etc.\n \u003c\/li\u003e\n \u003cli\u003e\n Target : IFLIGHT_BILTZ_G3 32.9\n \u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cp\u003e\n \u003cstrong\u003e\n What's in the Box:\n \u003c\/strong\u003e\n\u003c\/p\u003e\n\u003cul\u003e\n \u003cli\u003e\n 1x BLITZ F745 Flight Controller: The brain that's more Einstein than Frankenstein.\n \u003c\/li\u003e\n \u003cli\u003e\n 1x BLITZ E55 4in1 2-6S ESC: The brawn that flexes without even trying.\n \u003c\/li\u003e\n \u003cli\u003e\n 1x Set of Dampers: Because your stack deserves a throne.\n \u003c\/li\u003e\n \u003cli\u003e\n 1x Set of Wires for FC: The essential arteries for your flying masterpiece.\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n Whether you're a seasoned pilot or a newbie with lofty ambitions, the BLITZ F745 E55 Stack by iFlight is your ticket to an elevated flying experience. Because flying a drone shouldn't just be about getting from point A to B; it should be an epic tale of power, precision, and a little bit of showing off.\n\u003c\/p\u003e\n","brand":"iFlight RC","offers":[{"title":"Default Title","offer_id":56578359689597,"sku":"BF15684","price":98.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/blitz-f745-e55-30x30-stack-by-iflight.png?v=1753831989"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/collections\/rn-image_picker_lib_temp_bd924f69-7dfb-4b8f-a19b-a0b120064f85.png?v=1773270988","url":"https:\/\/www.unmannedtechshop.co.uk\/collections\/flight-controllers-electronics.oembed?page=12","provider":"Unmanned Tech","version":"1.0","type":"link"}