{"title":"Autopilots \/ Flight Controllers","description":"\u003cp\u003eWelcome to the brain department. The central nervous system. The tiny silicon overlord that solves hundreds of physics problems a second just to keep your flying machine from spontaneously disassembling in mid-air.\u003c\/p\u003e\n\u003cp\u003eThis little board is arguably the most important component of your entire build. It’s where raw stick inputs or complex mission commands are translated into precise, controlled flight. Or, if you get it wrong, a spectacular death roll. Choose wisely.\u003c\/p\u003e\n\u003ch3\u003e\u003cb\u003eChoose Your Philosophy: Acro or Auto?\u003c\/b\u003e\u003c\/h3\u003e\n\u003cp\u003eNot all brains think alike. The flight controller you need depends entirely on your mission. Are you trying to thread a needle-gap in a bando, or are you trying to autonomously map a 50-acre field?\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eThe FPV Corner: Betaflight \u0026amp; iNAV\u003c\/b\u003e This is the home of raw performance and low latency. These flight controllers are built for the pilot who is directly, intimately connected to their machine. We're talking blazing-fast H7 processors, ultra-sensitive gyros, and the endless, beautiful rabbit hole of PID tuning. If your goal is buttery-smooth freestyle, lightning-fast racing, or GPS-assisted cinematic lines with iNAV, your brain lives here.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eThe Pro Hangar: ArduPilot \u0026amp; PX4\u003c\/b\u003e This is where things get serious. ArduPilot and PX4 are more than flight controllers; they are true, open-source autopilot systems. This is the realm of fully autonomous missions, redundant sensors, CAN bus peripherals, and complex payload integration. If you're building a commercial survey drone, a mapping VTOL, or a heavy-lift rig that absolutely, positively cannot fail, this is your section. This is less about stick feel and more about mission success.\u003c\/p\u003e\n\u003cp\u003eNo matter which path you choose, you're handing over control to one of these magnificent little boards. Go on, pick your brain. Your weekend of staring at a configuration screen awaits. You know you love it.\u003c\/p\u003e","products":[{"product_id":"ardupilot-apm-2-8-flight-controller-board-1","title":"ArduPilot APM 2.8 Flight Controller Board","description":"\u003cblockquote\u003e\n\u003cp\u003eDue to the age of this product, we are only selling the APM2.8 as a legacy product, firmware has not been updated for over 2 years and we will not offer any setup support\/advice. If the unit has a hardware issue out of the box we will help, but otherwise we cannot offer support on this item anymore. We suggest you rather consider the newer pixhawk based autopilots we sell.\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\u003cp\u003eThis is the new APM 2.8 flight controller. The sensors are exactly the same as the APM 2.6 flight controller however this has the option to use the built in compass, or external compass via a jumper. This makes the APM 2.8 ideal for use with multicopters and rovers.\u003c\/p\u003e\n\u003cp\u003eThe APM 2.8 is a complete open source autopilot system and the bestselling technology that won the prestigious Outback Challenge UAV competition. It allows the user to turn any fixed, rotary wing or multirotor vehicle (even cars and boats) into a fully autonomous vehicle; capable of performing programmed GPS missions with waypoints.\u003c\/p\u003e\n\u003cp\u003eThis revision of the board has an optional onboard compass, which is designed for vehicles (especially multicopters and rovers) where the compass should be placed as far from power and motor sources as possible to avoid magnetic interference. (On fixed wing aircraft it's often easier to mount APM far enough away from the motors and ESCs to avoid magnetic interference, so this is not as critical, but APM 2.8 gives more flexibility in that positioning and is a good choice for them, too). This is designed to be used with the 3DR uBlox GPS with Compass, so that the GPS\/Compass unit can be mounted further from noise sources than APM itself.\u003c\/p\u003e\n\u003cp\u003eAPM 2.8 requires a GPS unit for full autonomy. You can add additional extras to your AMP 2.8 board via the options above.\u003c\/p\u003e\n\u003ch3\u003eUsing the built in compass\u003c\/h3\u003e\n\u003cp\u003eTo use the built in compass simply connect the jumper as shown below. If the compass jumper is removed then the APM board will use the external compass which is best for multirotors with a GPS\/compass module mounted externally\u003c\/p\u003e\n\u003cp\u003e\u003cimg width=\"179\" title=\"apm-internal-compass.jpg\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/apm-internal-compass.jpg?v=1754231354\" height=\"135\" class=\"__mce_add_custom__\" alt=\"apm-internal-compass.jpg\"\u003e .\u003c\/p\u003e\n\u003ch3\u003ePOWERFUL GROUND CONTROL SOFTWARE\u003c\/h3\u003e\n\u003cp\u003eThe downloadable mission planner software is what you use to configure and control your Ardupilot board, features include:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePoint-and-click waypoint entry, using Google Maps.\u003c\/li\u003e\n\u003cli\u003eSelect mission commands from drop-down menus\u003c\/li\u003e\n\u003cli\u003eDownload mission log files and analyze them\u003c\/li\u003e\n\u003cli\u003eConfigure APM settings for your airframe\u003c\/li\u003e\n\u003cli\u003eInterface with a PC flight simulator to create a full hardware-in-the-loop UAV simulator.\u003c\/li\u003e\n\u003cli\u003eSee the output from APM's serial terminal\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWHAT CAN THE APM BOARD CONTROL?\u003c\/h3\u003e\n\u003cp\u003eThe ArduPilot Mega board can control Planes, Copters and Rovers. All you need to do is load the appropriate software onto the board with a few clicks\u003c\/p\u003e\n\u003ch3\u003eFEATURES:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eArduino Compatible!\u003c\/li\u003e\n\u003cli\u003eIncludes 3-axis gyro, accelerometer, along with a high-performance barometer\u003c\/li\u003e\n\u003cli\u003eOnboard 4 MegaByte Dataflash chip for automatic datalogging\u003c\/li\u003e\n\u003cli\u003eOptional off-board GPS, uBlox LEA-6H module with Compass.\u003c\/li\u003e\n\u003cli\u003eOne of the first open source autopilot systems to use Invensense's 6 DoF Accelerometer\/Gyro MPU-6000.\u003c\/li\u003e\n\u003cli\u003eBarometric pressure sensor upgraded to MS5607, from Measurement Specialties.\u003c\/li\u003e\n\u003cli\u003eAtmel's ATMEGA2560 and ATMEGA32U-2 chips for processing and usb functions respectively.\u003c\/li\u003e\n\u003cli\u003eWeight: 30g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eRESOURCES:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca rel=\"noopener noreferrer\" href=\"http:\/\/plane.ardupilot.com\/\" target=\"_blank\"\u003e ArduPlane manual \u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca rel=\"noopener noreferrer\" href=\"http:\/\/copter.ardupilot.com\/\" target=\"_blank\"\u003e ArduCopter manual \u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca rel=\"noopener noreferrer\" href=\"http:\/\/rover.ardupilot.com\/\" target=\"_blank\"\u003e ArduRover manual \u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca rel=\"noopener noreferrer\" href=\"http:\/\/stuff.storediydrones.com\/APM_v25.pdf\" target=\"_blank\"\u003e Dimensional drawing \u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca rel=\"noopener noreferrer\" href=\"http:\/\/stuff.storediydrones.com\/APM_v252_RELEASE.zip\" target=\"_blank\"\u003e EAGLE files \u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca rel=\"noopener noreferrer\" href=\"http:\/\/stuff.storediydrones.com\/Assembly_APM25.jpg\" target=\"_blank\"\u003e Assembly guide. \u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Unmanned Tech","offers":[{"title":"Default Title","offer_id":56578112127357,"sku":"APM2.8-1","price":37.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/ArduPilotAPM2.8FlightControllerBoard3.webp?v=1770046932"},{"product_id":"skystars-f722-hd-pro-4-flight-controller-3-6s-30x30","title":"SkyStars F722 HD Pro 4 Flight Controller 3-6S 30x30","description":"\u003cp\u003e\n Introducing the\n \u003cstrong\u003e\n  SkyStars F722 HD PRO4 Flight Controller\n \u003c\/strong\u003e\n , designed not just to keep your drone in the air, but to dominate it! This isn't your everyday flight controller; it's a compact powerhouse packed with features that make it more akin to the Swiss Army knife of drone tech. Let's dive into what makes the F722 HD PRO4 a must-have for drone enthusiasts and tech aficionados alike.\n\u003c\/p\u003e\n\u003ch4\u003e\n High-Speed MCU \u0026amp; Superior Sensors\n\u003c\/h4\u003e\n\u003cp\u003e\n At the heart of the F722 HD PRO4 lies the\n \u003cstrong\u003e\n  STM32F722RGT6 MCU\n \u003c\/strong\u003e\n , operating at a lightning-fast 216MHz. This ensures your flight commands are processed faster than you can say \"lift-off!\" Accompanying the robust MCU is the\n \u003cstrong\u003e\n  MPU6000 Gyroscope\n \u003c\/strong\u003e\n , providing stable, smooth, and reliable flight dynamics, perfect for capturing cinematic shots or zipping through race gates.\n\u003c\/p\u003e\n\u003ch4\u003e\n Versatile Connectivity\n\u003c\/h4\u003e\n\u003cp\u003e\n The controller boasts an impressive array of connections:\n\u003c\/p\u003e\n\u003cul\u003e\n \u003cli\u003e\n  \u003cstrong\u003e\n   Six UART ports\n  \u003c\/strong\u003e\n  for multifunctional use.\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003cstrong\u003e\n   PWM Outputs\n  \u003c\/strong\u003e\n  and\n  \u003cstrong\u003e\n   I2C\n  \u003c\/strong\u003e\n  for additional sensor and peripheral integration.\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003cstrong\u003e\n   USB Type-C\n  \u003c\/strong\u003e\n  for modern, efficient PC connections.\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003cstrong\u003e\n   DJI FPV OSD compatibility\n  \u003c\/strong\u003e\n  via any spare UART, ensuring seamless integration with top-tier visual equipment.\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\n LED and Power Features\n\u003c\/h4\u003e\n\u003cp\u003e\n Light up the skies with\n \u003cstrong\u003e\n  4 LED independent pads\n \u003c\/strong\u003e\n , supporting WS2812 programming for that personal touch in the night sky. The onboard\n \u003cstrong\u003e\n  BEC with dual-channel output (5V\/10V 3A max)\n \u003c\/strong\u003e\n ensures a stable power supply, making your flying experience worry-free.\n\u003c\/p\u003e\n\u003ch4\u003e\n Robust Build and Thoughtful Extras\n\u003c\/h4\u003e\n\u003cul\u003e\n \u003cli\u003e\n  \u003cstrong\u003e\n   Input Voltage Support of 3-6S\n  \u003c\/strong\u003e\n  caters to a variety of setups, from conservative flyers to power-hungry beasts.\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003cstrong\u003e\n   Integrated LDO 3.3V\n  \u003c\/strong\u003e\n  , ensuring delicate accessories get the right amount of power.\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003cstrong\u003e\n   Compact Dimensions\n  \u003c\/strong\u003e\n  (30.5mm x 30.5mm installation size) make it a breeze to fit in most drone designs.\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\n In the Box:\n\u003c\/h4\u003e\n\u003cul\u003e\n \u003cli\u003e\n  \u003cstrong\u003e\n   1x F722 HD Pro4 FC\n  \u003c\/strong\u003e\n  : The brain of your drone.\n \u003c\/li\u003e\n \u003cli\u003e\n  Accessories Kit\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n Whether you're a dedicated drone racer, a fervent aerial photographer, or somewhere in between, the\n \u003cstrong\u003e\n  SkyStars F722 HD PRO4 Flight Controller\n \u003c\/strong\u003e\n turns the sky into your personal playground. With its top-notch control features and robust build, this flight controller isn't just keeping up with the competition—it's flying circles around it!\n\u003c\/p\u003e\n\u003cp\u003e\n \u003cimg alt=\"\" class=\"alignnone size-full wp-image-688733\" height=\"2560\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/Skystars-F722-Hd-pro-4-FC-1-scaled.jpg?v=1754236480\" width=\"1052\"\u003e\n\u003c\/p\u003e\n\u003cp\u003e\n\u003c\/p\u003e\n","brand":"SkyStars","offers":[{"title":"Default Title","offer_id":56578177401213,"sku":"SK-F7WHD","price":44.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/Skystars-F722-Hd-pro-4-FC-3.jpg?v=1753830747"},{"product_id":"pixhawk-cube-mini-purple-imu-no-carrier-board-included","title":"Pixhawk Cube Mini Purple -  IMU (No carrier board included)","description":"\u003cp\u003e\n \u003cstrong\u003e\n  Meet the Cube Purple F4 FMU: The Pint-Sized Powerhouse\n \u003c\/strong\u003e\n\u003c\/p\u003e\n\u003cp\u003e\n In the world of IMUs, size matters. But bigger isn't always better. Get ready to meet the Cube Purple F4 FMU - the pocket rocket of the Pixhawk universe. This little dynamo might stand just 1cm tall, but it packs all the punch of its bigger siblings. It's like the Danny Devito of IMUs - tiny in stature but absolutely brimming with talent.\n\u003c\/p\u003e\n\u003cp\u003e\n \u003cstrong\u003e\n  Key Features:\n \u003c\/strong\u003e\n\u003c\/p\u003e\n\u003cul\u003e\n \u003cli\u003e\n  \u003cstrong\u003e\n   Micro but Mighty:\n  \u003c\/strong\u003e\n  The Cube Purple F4 FMU is a miniaturised marvel. It's the ideal solution for projects with tight space constraints, fitting perfectly onto the Cube Mini carrier board. It's so small you might need a microscope to see it (not really, but it's pretty tiny!).\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003cstrong\u003e\n   Double Trouble Processing Power:\n  \u003c\/strong\u003e\n  Featuring an STM32F427 processor running the flight management software, and an STM32F100 handling I\/O, pass-through and failsafe functionality. This dynamic duo are like Batman and Robin, Sherlock and Watson, Bert and Ernie. They're here to save the day and make your project a success.\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003cstrong\u003e\n   10-Axis IMU:\n  \u003c\/strong\u003e\n  Not just any IMU, this device boasts a 10 Axis IMU (MPU9250 and MS5611) to provide the industry-leading performance of the Cube. It's a powerhouse that punches way above its weight.\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n \u003cstrong\u003e\n  Please Note:\n \u003c\/strong\u003e\n The Pixhawk Mini Carrier Board is sold separately. It's like buying a fancy suit, the tie isn't included but it's the perfect accessory to complete the look.\n\u003c\/p\u003e\n\u003ch2\u003e\n Resources\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  \u003ca href=\"https:\/\/www.unmannedtechshop.co.uk\/wp-content\/uploads\/2019\/02\/Cube-Purple-Mini-Cube-Mini-Carrier-Board.pdf\"\u003e\n   Cube-Purple-Mini-Cube-Mini-Datasheet\n  \u003c\/a\u003e\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n \u003cimg alt=\"\" class=\"aligncenter size-full wp-image-473201\" height=\"2560\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/CubePilot-Ecosystem-OEM-Carrier-Board-Poster-scaled_7e45b340-8b72-4785-8285-77254688c0a5.jpg?v=1754235414\" width=\"1920\"\u003e\n\u003c\/p\u003e\n\u003cp\u003e\n\u003c\/p\u003e\n","brand":"CubePilot","offers":[{"title":"Default Title","offer_id":56578180317565,"sku":"HX4-06059","price":239.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/PixhawkCubeMiniPurple1.webp?v=1770644063"},{"product_id":"skystars-f405-mini-hd-v2-20x20-fc","title":"Skystars F405 Mini HD V2 20x20 FC","description":"\u003ch2\u003e\n Specifications\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Item name: F405HD Mini Betaflight Flight Controller\n \u003c\/li\u003e\n \u003cli\u003e\n  Input voltage: 3-6S LiPo(11.1V~22.2V)\n \u003c\/li\u003e\n \u003cli\u003e\n  MCU:STM32F705RGT6 168MHz\n \u003c\/li\u003e\n \u003cli\u003e\n  IMU: MPU6000 (SPI) \/ BMI270\n \u003c\/li\u003e\n \u003cli\u003e\n  OSD: Betaflight OSD or DJI HD OSD (UART6)\n \u003c\/li\u003e\n \u003cli\u003e\n  6 hardware UARTS (UART1,2,3,4,5,6,)\n \u003c\/li\u003e\n \u003cli\u003e\n  Receiver: TBS\/PPM\/SBUS\/IBUS\/DSM\n \u003c\/li\u003e\n \u003cli\u003e\n  Barometer: YES\n \u003c\/li\u003e\n \u003cli\u003e\n  Buzzer Pad: YES\n \u003c\/li\u003e\n \u003cli\u003e\n  CURR Pad: YES\n \u003c\/li\u003e\n \u003cli\u003e\n  BEC 5V 2A \u0026amp; 10V 2A(Max 3A)\n \u003c\/li\u003e\n \u003cli\u003e\n  Blackbox: 8MB\n \u003c\/li\u003e\n \u003cli\u003e\n  Firmware: SKYSTARS F405HD\n \u003c\/li\u003e\n \u003cli\u003e\n  Mounting Holes: 20mm\/M3\n \u003c\/li\u003e\n \u003cli\u003e\n  Weight: 4g\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n Includes\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  1 x SkyStars F405 Mini HD V2 Flight Controller\n \u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"SkyStars","offers":[{"title":"Default Title","offer_id":56578180809085,"sku":"SK-F405HD2","price":33.8,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/SkystarsF405MiniHDV220x20FC.jpg?v=1770646659"},{"product_id":"mini-carrier-board-cable-set","title":"Mini Carrier Board Cable Set","description":"\u003cp\u003e\n Are you in need of a reliable way to connect your equipment to your\n \u003ca href=\"https:\/\/www.unmannedtechshop.co.uk\/product\/pixhawk-2-mini-carrier-board\/\"\u003e\n  Pixhawk Mini Carrier Board\n \u003c\/a\u003e\n autopilot? Look no further! Our cable pack has everything you need, including a CAN cable, an I2C cable, a BUZZER cable, a MICRO USB cable, a GPS1 cable with a safety switch, a GPS2 cable, two TELEM cables, and a POWER cable. These high-quality cables enable data communication, power supply, and the ability to connect external sensors and devices.\n\u003c\/p\u003e\n\u003cp\u003e\n Imagine the versatility and efficiency you'll gain by using these cables to optimize the performance of your Pixhawk Mini Carrier Board. Whether you're a professional UAV operator or a hobbyist looking to build and customize your own drone, these cables are a must-have for connecting and communicating with your autopilot.\n\u003c\/p\u003e\n\u003cp\u003e\n Don't miss out on the opportunity to enhance your\n \u003ca href=\"https:\/\/www.unmannedtechshop.co.uk\/product\/pixhawk-2-mini-carrier-board\/\"\u003e\n  Pixhawk Mini Carrier Board\n \u003c\/a\u003e\n experience. Get your cable pack today and take your UAV capabilities to new heights!  Whether you are a professional UAV operator or a hobbyist looking to build and customize your own drone, this cable pack is an essential component for connecting and communicating with your Pixhawk Mini Carrier Board.\n\u003c\/p\u003e\n\u003ch2\u003e\n Cables included:\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  CAN Cable *1\n \u003c\/li\u003e\n \u003cli\u003e\n  I2C Cable * 1\n \u003c\/li\u003e\n \u003cli\u003e\n  BUZZER Cable * 1\n \u003c\/li\u003e\n \u003cli\u003e\n  MICRO USB Cable * 1\n \u003c\/li\u003e\n \u003cli\u003e\n  GPS1 Cable(with saftey switch) * 1\n \u003c\/li\u003e\n \u003cli\u003e\n  GPS2 Cable * 1\n \u003c\/li\u003e\n \u003cli\u003e\n  TELEM Cable * 2\n \u003c\/li\u003e\n \u003cli\u003e\n  POWER Cable * 1\n \u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"CubePilot","offers":[{"title":"Default Title","offer_id":56578181759357,"sku":"HX4-96072","price":9.53,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/Cube-Mini-Carrier-Board-Cable-Set.jpg?v=1753830772"},{"product_id":"cubepilot-mini-purple-autopilot-set-mini-cube-mini-carrier-board-mini-carrier-board-cable-set","title":"CubePilot Mini Purple Autopilot Set (Mini Cube+Mini Carrier Board+Mini Carrier Board Cable Set)","description":"\u003cp\u003e\n Meet the Cubepilot Mini Purple Autopilot kit, a high-performance yet compact drone autopilot system, designed for projects with limited space. Barely 1 cm tall, the Cube Mini Purple is power-packed with features that set it apart in the drone tech world.\n\u003c\/p\u003e\n\u003cp\u003e\n The Cube Mini Purple carries the high-performance STM32F427 Flight Management Unit (FMU) and STM32F100 I\/O processor. It supports a 10-axis IMU, including MPU9250 and MS5611, ensuring top-notch navigation and stability for your drone projects. With five serial ports, two of which offer full flow control, and two I2C-enabled, you can connect two compass modules simultaneously, enhancing navigation precision to unprecedented levels.\n\u003c\/p\u003e\n\u003cp\u003e\n But that's not all. The Cube Mini Purple also supports SPI, CAN-Bus, CPPM, S.Bus, and DSM\/Spektrum inputs, offering a wide range of connectivity options. Power it through USB or two brick ports, safeguarded against reverse-polarity and back-powering. It supports both standard (5V) and high-voltage (up to 10V) servo power. Plus, a backup power port adds an extra layer of safety for uninterrupted operations.\n\u003c\/p\u003e\n\u003cp\u003e\n The Cube Mini Purple is not just about performance, it is also about robustness and safety. The servo rail accepts up to 10.5V power, reverting to manual mode if other power sources fail, ensuring your drone project stays safe even under unforeseen circumstances.\n\u003c\/p\u003e\n\u003cp\u003e\n Why wait? Experience the cutting-edge technology of the Cubepilot Mini Purple Autopilot kit. Unlock new possibilities in your drone projects with superior navigation, power management, and connectivity. Order your Cubepilot Mini Purple Autopilot kit today and redefine your drone experience.\n\u003c\/p\u003e\n\u003ch2\u003e\n CubePIlot Purple Details\n\u003c\/h2\u003e\n\u003cp\u003e\n The Cube Mini Autopilot, also known as the Cube Purple, is a compact and high-performance drone autopilot system designed for projects with limited space. It is about 1 cm tall and features the STM32F427 flight management unit (FMU) and STM32F100 I\/O processor, along with a 10-axis IMU (MPU9250 and MS5611). Here are some key details about the Cube Mini:\n\u003c\/p\u003e\n\u003cp\u003e\n \u003cstrong\u003e\n  Connectivity and Ports\n \u003c\/strong\u003e\n\u003c\/p\u003e\n\u003cul\u003e\n \u003cli\u003e\n  The Cube Mini uses an 80-pin connector for peripheral connections, which are further connected via a baseboard that can be customized for each application​\n  \u003cspan class=\"\" data-state=\"closed\"\u003e\n   \u003ca class=\"px-0.5 text-green-600 !no-underline\" href=\"https:\/\/docs.cubepilot.org\/user-guides\/autopilot\/the-cube-module-overview\" rel=\"noopener noreferrer\" target=\"_blank\"\u003e\n    \u003csup\u003e\n     1\n    \u003c\/sup\u003e\n   \u003c\/a\u003e\n  \u003c\/span\u003e\n  ​.\n \u003c\/li\u003e\n \u003cli\u003e\n  It has five serial ports. Serial 1 and 2 feature full flow control. Serial 3 is recommended for the GPS port. Serial 4 and 5 also provide I2C connectivity, allowing two compass modules to be connected simultaneously​\n  \u003cspan class=\"\" data-state=\"closed\"\u003e\n   \u003ca class=\"px-0.5 text-green-600 !no-underline\" href=\"https:\/\/docs.cubepilot.org\/user-guides\/autopilot\/the-cube-module-overview\" rel=\"noopener noreferrer\" target=\"_blank\"\u003e\n    \u003csup\u003e\n     2\n    \u003c\/sup\u003e\n   \u003c\/a\u003e\n  \u003c\/span\u003e\n  ​.\n \u003c\/li\u003e\n \u003cli\u003e\n  It supports SPI communication, but this port is not buffered and should only be used with short cable runs​\n  \u003cspan class=\"\" data-state=\"closed\"\u003e\n   \u003ca class=\"px-0.5 text-green-600 !no-underline\" href=\"https:\/\/docs.cubepilot.org\/user-guides\/autopilot\/the-cube-module-overview\" rel=\"noopener noreferrer\" target=\"_blank\"\u003e\n    \u003csup\u003e\n     3\n    \u003c\/sup\u003e\n   \u003c\/a\u003e\n  \u003c\/span\u003e\n  ​.\n \u003c\/li\u003e\n \u003cli\u003e\n  The Cube Mini also supports CAN-Bus, CPPM, S.Bus, and DSM\/Spektrum inputs​\n  \u003cspan class=\"\" data-state=\"closed\"\u003e\n   \u003ca class=\"px-0.5 text-green-600 !no-underline\" href=\"https:\/\/docs.cubepilot.org\/user-guides\/autopilot\/the-cube-module-overview\" rel=\"noopener noreferrer\" target=\"_blank\"\u003e\n    \u003csup\u003e\n     4\n    \u003c\/sup\u003e\n   \u003c\/a\u003e\n  \u003c\/span\u003e\n  ​.\n \u003c\/li\u003e\n \u003cli\u003e\n  The piezo port can drive most piezo elements in the 5 - 300nF range at up to 35V​\n  \u003cspan class=\"\" data-state=\"closed\"\u003e\n   \u003ca class=\"px-0.5 text-green-600 !no-underline\" href=\"https:\/\/docs.cubepilot.org\/user-guides\/autopilot\/the-cube-module-overview\" rel=\"noopener noreferrer\" target=\"_blank\"\u003e\n    \u003csup\u003e\n     5\n    \u003c\/sup\u003e\n   \u003c\/a\u003e\n  \u003c\/span\u003e\n  ​.\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n \u003cstrong\u003e\n  Power Architecture\n \u003c\/strong\u003e\n\u003c\/p\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Power can be supplied to the Cube Mini via USB, the power brick port, or the second brick port. Each power source is protected against reverse-polarity connections and back-powering from other sources​\n  \u003cspan class=\"\" data-state=\"closed\"\u003e\n   \u003ca class=\"px-0.5 text-green-600 !no-underline\" href=\"https:\/\/docs.cubepilot.org\/user-guides\/autopilot\/the-cube-module-overview\" rel=\"noopener noreferrer\" target=\"_blank\"\u003e\n    \u003csup\u003e\n     6\n    \u003c\/sup\u003e\n   \u003c\/a\u003e\n  \u003c\/span\u003e\n  ​.\n \u003c\/li\u003e\n \u003cli\u003e\n  The Cube Mini supports both standard (5V) and high-voltage (up to 10V) servo power with some restrictions​\n  \u003cspan class=\"\" data-state=\"closed\"\u003e\n   \u003ca class=\"px-0.5 text-green-600 !no-underline\" href=\"https:\/\/docs.cubepilot.org\/user-guides\/autopilot\/the-cube-module-overview\" rel=\"noopener noreferrer\" target=\"_blank\"\u003e\n    \u003csup\u003e\n     7\n    \u003c\/sup\u003e\n   \u003c\/a\u003e\n  \u003c\/span\u003e\n  ​.\n \u003c\/li\u003e\n \u003cli\u003e\n  The Cube Mini introduces a backup power port; this is set up the same as the primary power input​\n  \u003cspan class=\"\" data-state=\"closed\"\u003e\n   \u003ca class=\"px-0.5 text-green-600 !no-underline\" href=\"https:\/\/docs.cubepilot.org\/user-guides\/autopilot\/the-cube-module-overview\" rel=\"noopener noreferrer\" target=\"_blank\"\u003e\n    \u003csup\u003e\n     8\n    \u003c\/sup\u003e\n   \u003c\/a\u003e\n  \u003c\/span\u003e\n  ​.\n \u003c\/li\u003e\n \u003cli\u003e\n  The servo rail can accept power up to 10.5V, which is used to revert to manual mode in the event that the other two main sources of power fail​\n  \u003cspan class=\"\" data-state=\"closed\"\u003e\n   \u003ca class=\"px-0.5 text-green-600 !no-underline\" href=\"https:\/\/docs.cubepilot.org\/user-guides\/autopilot\/the-cube-module-overview\" rel=\"noopener noreferrer\" target=\"_blank\"\u003e\n    \u003csup\u003e\n     9\n    \u003c\/sup\u003e\n   \u003c\/a\u003e\n  \u003c\/span\u003e\n  ​.\n \u003c\/li\u003e\n \u003cli\u003e\n  Power from USB is supported for software update, testing, and development purposes​\n  \u003cspan class=\"\" data-state=\"closed\"\u003e\n   \u003ca class=\"px-0.5 text-green-600 !no-underline\" href=\"https:\/\/docs.cubepilot.org\/user-guides\/autopilot\/the-cube-module-overview\" rel=\"noopener noreferrer\" target=\"_blank\"\u003e\n    \u003csup\u003e\n     10\n    \u003c\/sup\u003e\n   \u003c\/a\u003e\n  \u003c\/span\u003e\n  ​.\n \u003c\/li\u003e\n \u003cli\u003e\n  When more than one power source is connected, power will be drawn from the highest-priority source with a valid input voltage​\n  \u003cspan class=\"\" data-state=\"closed\"\u003e\n   \u003ca class=\"px-0.5 text-green-600 !no-underline\" href=\"https:\/\/docs.cubepilot.org\/user-guides\/autopilot\/the-cube-module-overview\" rel=\"noopener noreferrer\" target=\"_blank\"\u003e\n    \u003csup\u003e\n     11\n    \u003c\/sup\u003e\n   \u003c\/a\u003e\n  \u003c\/span\u003e\n  ​.\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n Kit Contents\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  The Cube Mini IMU\n \u003c\/li\u003e\n \u003cli\u003e\n  The Cube Mini Carrier Board\n \u003c\/li\u003e\n \u003cli\u003e\n  Cube Mini Cable Pack\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n Resources\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  \u003ca href=\"https:\/\/www.unmannedtechshop.co.uk\/wp-content\/uploads\/2019\/02\/Cube-Purple-Mini-Cube-Mini-Carrier-Board.pdf\"\u003e\n   Cube-Purple-Mini-Cube-Datasheet\n  \u003c\/a\u003e\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n \u003cimg alt=\"\" class=\"aligncenter size-full wp-image-473201\" height=\"2560\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/CubePilot-Ecosystem-OEM-Carrier-Board-Poster-scaled.jpg?v=1754232331\" width=\"1920\"\u003e\n\u003c\/p\u003e\n","brand":"CubePilot","offers":[{"title":"Default Title","offer_id":56578184806781,"sku":"695-76F-C82","price":299.95,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/cubepilot-the-cube-purple-f4-set-p4254-11090_image.jpg?v=1753830784"},{"product_id":"cubepilot-here3-gnss-module-for-pixhawk-m8p-w-istand","title":"CubePilot HERE3+ GNSS Module for Pixhawk (M8P) w\/ iStand","description":"\u003cp\u003eThe Here3 GPS is a high precision GNSS system, which also supports RTK navigation mode, built with CAN protocol. It is also designed to be dust-proof and splash proof. Equipped with STM32F302 processor, the Here3 provides faster processing speed and better reliability.\u003c\/p\u003e\n\u003cp\u003eThe Here3 has built-in sensors such as compass, gyroscope, accelerometer, and status LED. It runs on a Chibios real-time operation system. Its open source structure is ideally suited to developers who need specialized requirements on their navigation system.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.unmannedtechshop.co.uk\/wp-content\/uploads\/2020\/07\/Here3-Manual.pdf\"\u003e Here3 Manual \u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCost efficient high precision and RTK supported GNSS chip (base station needed for RTK). Positioning accuracy down to centimetre-level in ideal environment.\u003c\/li\u003e\n\u003cli\u003eBrand new design with improved visibility on signal LEDs. Better dust proof and water repellent design (No guarentee to be water proof under any situation due to complexity of operation environment).\u003c\/li\u003e\n\u003cli\u003eHigh data rate, upgradeability, noise immunity, and real-time features benefited from CAN protocol\u003c\/li\u003e\n\u003cli\u003eEquipped with STM32F302 high-performance processor in real-time operation system. Framework developed by CubePilot provides additional stabilities. Supports future firmware updates.\u003c\/li\u003e\n\u003cli\u003eSupporting ground control station available. Easy update from Mission Planner.\u003c\/li\u003e\n\u003cli\u003eBuilt-in a complete set of Inertial Measurement Unit (compass, gyroscope, and accelerometer), which satisfy advanced navigation needs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/Here3_20GNSS_20Module_20Info.jpg?v=1754232327\" class=\"aligncenter\"\u003e\u003c\/p\u003e\n\u003ch2\u003eSpecification\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eReceiver Type - u-blox M8 high precision GNSS modules (M8P)\u003c\/li\u003e\n\u003cli\u003eSatellite Constellation - GPS L1C\/A, GLONASS L1OF, BeiDou B1I\u003c\/li\u003e\n\u003cli\u003ePositioning accuracy - 3D FIX: 2.5 m \/ RTK: 0.025 m\u003c\/li\u003e\n\u003cli\u003eProcessor - STM32F302\u003c\/li\u003e\n\u003cli\u003eIMU sensor - ICM20948\u003c\/li\u003e\n\u003cli\u003eNavigation Update Rate Max: 8Hz\u003c\/li\u003e\n\u003cli\u003eCommunication Protocol - CAN\u003c\/li\u003e\n\u003cli\u003eOperating Temperature -40℃ to 85℃\u003c\/li\u003e\n\u003cli\u003eDimension - 76mmx76mmx16.6mm\u003c\/li\u003e\n\u003cli\u003eWeight - 48.8g\u003c\/li\u003e\n\u003cli\u003eManufacturer Part Number: HX4-06213\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CubePilot","offers":[{"title":"Default Title","offer_id":56578184905085,"sku":"D3A-277-A00","price":145.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/Here3-istand.webp?v=1753830787"},{"product_id":"t-motor-f7-pro-flight-controller","title":"T-Motor F7 Pro Flight Controller","description":"\u003ch1\u003eT-Motor F7 Pro Flight Controller (WiFi \u0026amp; Bluetooth)\u003c\/h1\u003e\n\u003cp\u003eLet’s be honest: crawling under your desk to plug a USB cable into a buried flight controller is a indignity no pilot should suffer in %current_year%. Enter the \u003cstrong\u003eT-Motor F7 Pro Flight Controller\u003c\/strong\u003e. This isn't just another 30x30 square of PCB; it’s a \u003cstrong\u003ewireless Betaflight tuning\u003c\/strong\u003e powerhouse designed for the \u003cstrong\u003ecinematic FPV\u003c\/strong\u003e professional and the cable-averse hobbyist. With 8 UARTs and support for massive \u003cstrong\u003eX8 cinelifter builds\u003c\/strong\u003e, it’s the brain your heavy-lift rig deserves.\u003c\/p\u003e\n\u003ch3\u003eWhy You Want It\u003c\/h3\u003e\n\u003cp\u003eBecause you value your sanity. The headline feature here is the built-in \u003cstrong\u003eWiFi and Bluetooth\u003c\/strong\u003e. Connect to the SpeedyBee app on your phone and flash firmware, reverse motor directions, or analyze Blackbox data without ever touching a computer. It’s magic, or sufficiently advanced technology, which is the same thing.\u003c\/p\u003e\n\u003cp\u003eBeyond the wireless wizardry, this board is built to work. It natively supports up to \u003cstrong\u003e8 motor outputs\u003c\/strong\u003e (no messy resource remapping needed for Octocopters) and handles input voltage up to \u003cstrong\u003e8S\u003c\/strong\u003e. That means you can run high-voltage setups for maximum efficiency on your cinema rigs. Plus, with a dedicated plug for the DJI Air Unit, you can get video up and running fast—though if you’re rocking the new O3, you might need to warm up the soldering iron (you were going to anyway).\u003c\/p\u003e\n\u003ch2\u003eT-Motor F7 Pro Specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMCU:\u003c\/strong\u003e STM32F722 RET6 (The industry standard for a reason)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGyro:\u003c\/strong\u003e ICM42688P (Newer, faster, better—just make sure your filtering is on point)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWireless:\u003c\/strong\u003e WiFi \u0026amp; Bluetooth (Throw your USB cables in the bin... okay, keep one, just in case)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput Voltage:\u003c\/strong\u003e 3S–8S (11.1V–33.6V for when you need serious power)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor Outputs:\u003c\/strong\u003e 8 PWM outputs (Perfect for X8 Cinelifters or just showing off)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUARTs:\u003c\/strong\u003e 8 (Enough for GPS, VTX, RX, LiDAR, and a coffee machine)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBEC:\u003c\/strong\u003e 5V\/3A \u0026amp; 10V\/2A (Juice for your hungry peripherals)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlackbox:\u003c\/strong\u003e 16MB Onboard Flash (Plenty of space to record your desyncs)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e 30.5×30.5mm (The classic footprint)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 8.1g (Lighter than a pound coin)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFirmware:\u003c\/strong\u003e Supports BetaFlight \u0026amp; INAV\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat’s in the Box*\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1× T-Motor F7 Pro Full Function Flight Controller\u003c\/li\u003e\n\u003cli\u003e1× Accessory Pack (Dampers, cables, and the hope that you wire it correctly)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eDisclaimer\u003c\/h2\u003e\n\u003cp\u003eWireless tuning is amazing, but it requires battery power. If you tune for too long without air cooling, your VTX will overheat and hate you. Plan accordingly.\u003c\/p\u003e\n\u003ch2\u003eStill Here?\u003c\/h2\u003e\n\u003cp\u003eYou’re reading about UART counts while your quad sits on the bench in pieces. We get it, research is procrastination's best friend. But seriously, if you’re building a cinematic rig or an X8, this is the flight controller that makes maintenance bearable. Add the \u003cstrong\u003eT-Motor F7 Pro\u003c\/strong\u003e to your basket and go create something cinematic.\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" class=\"alignnone size-full wp-image-587772\" height=\"840\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/F7-PRO-Details-1.jpg?v=1754237161\" width=\"1920\"\u003e \u003cimg alt=\"\" class=\"alignnone size-full wp-image-587775\" height=\"1067\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/F7-PRO-Details-2.jpg?v=1754237164\" width=\"1920\"\u003e \u003cimg alt=\"\" class=\"alignnone size-full wp-image-587778\" height=\"1032\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/F7-PRO-Details-3.jpg?v=1754237168\" width=\"1920\"\u003e \u003cimg alt=\"\" class=\"alignnone size-full wp-image-587781\" height=\"757\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/F7-PRO-Details-4.jpg?v=1754237171\" width=\"1920\"\u003e \u003cimg alt=\"\" class=\"alignnone size-full wp-image-587784\" height=\"793\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/F7-PRO-Details-5.jpg?v=1754237173\" width=\"1920\"\u003e \u003cimg alt=\"\" class=\"alignnone size-full wp-image-587787\" height=\"972\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/F7-PRO-Details-6.jpg?v=1754237176\" width=\"1920\"\u003e \u003cimg alt=\"\" class=\"alignnone size-full wp-image-587790\" height=\"806\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/F7-PRO-Details-7.jpg?v=1754237180\" width=\"1920\"\u003e \u003cimg alt=\"\" class=\"alignnone size-full wp-image-587793\" height=\"825\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/F7-PRO-Details-8.jpg?v=1754237183\" width=\"1920\"\u003e \u003cimg alt=\"\" class=\"alignnone size-full wp-image-587796\" height=\"818\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/F7-PRO-Details-9.jpg?v=1754237186\" width=\"1920\"\u003e \u003cimg alt=\"\" class=\"alignnone size-full wp-image-587799\" height=\"1226\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/F7-PRO-Details-10.jpg?v=1754237190\" width=\"1920\"\u003e \u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/1709618566790298.jpg?v=1767798868\"\u003e\u003c\/p\u003e","brand":"T-Motor","offers":[{"title":"Default Title","offer_id":56578185888125,"sku":"BFB-FF4-B1D","price":66.89,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/F7-PRO-1.webp?v=1753830804"},{"product_id":"iflight-blitz-mini-f7-flight-controller","title":"iFlight Blitz Mini F7 Flight Controller","description":"\u003ch2\u003e\n Features\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli style=\"font-weight: 400;\"\u003e\n  Improved circuit design, better components, and lower electrical noise!\n \u003c\/li\u003e\n \u003cli style=\"font-weight: 400;\"\u003e\n  DJI HD VTX Connector (Plug-and-Play \/ No soldering required)\n \u003c\/li\u003e\n \u003cli style=\"font-weight: 400;\"\u003e\n  FC indicator LEDs for visual debugging\n \u003c\/li\u003e\n \u003cli style=\"font-weight: 400;\"\u003e\n  With LC filter\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n Specifications\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  MCU: STM32 F722\n \u003c\/li\u003e\n \u003cli\u003e\n  Gyro: MPU6000 \/ BMI270\n  \u003cstrong\u003e\n   (please note this IMU may change from batch to batch due to supply and pricing issues due to current chip shortages with MPU6000)\n  \u003c\/strong\u003e\n \u003c\/li\u003e\n \u003cli\u003e\n  Barometer: DPS310\n \u003c\/li\u003e\n \u003cli\u003e\n  OSD Chip: AT7456E\n \u003c\/li\u003e\n \u003cli\u003e\n  Flash: 16MB (Blackbox flash)\n \u003c\/li\u003e\n \u003cli\u003e\n  UARTS: 6\n \u003c\/li\u003e\n \u003cli\u003e\n  Motor outputs: 4x (SH1.0 connector)\n \u003c\/li\u003e\n \u003cli\u003e\n  I2C serial: SDA \/ SLA pads\n \u003c\/li\u003e\n \u003cli\u003e\n  Smartaudio \/ IRC Tramp VTX protocol supported\n \u003c\/li\u003e\n \u003cli\u003e\n  LED controller: Yes\n \u003c\/li\u003e\n \u003cli\u003e\n  Beeper pad: Yes\n \u003c\/li\u003e\n \u003cli\u003e\n  Firmware target: IFRC-IFLIGHT_BLITZ_F722\n \u003c\/li\u003e\n \u003cli\u003e\n  Mount pattern: 20x20 mm \/ 4mm PCB hole diameter, silicon grommets for M3 screws\n \u003c\/li\u003e\n \u003cli\u003e\n  Dimensions: 30.5x27 mm\n \u003c\/li\u003e\n \u003cli\u003e\n  Weight: 5g\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n Wiring Guide\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  \u003cspan style=\"color: #636363; font-family: sans-serif;\"\u003e\n   UART 1 for VTX HD \/ Analog\n  \u003c\/span\u003e\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003cspan style=\"color: #636363; font-family: sans-serif;\"\u003e\n   UART 2 for a Receiver\n  \u003c\/span\u003e\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003cspan style=\"color: #636363; font-family: sans-serif;\"\u003e\n   UART 3\/4\/5 for GPS or other sensors that require a serial port\n  \u003c\/span\u003e\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003cspan style=\"color: #636363; font-family: sans-serif;\"\u003e\n   UART 6 for ESC Telemetry\n  \u003c\/span\u003e\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n Tips\n\u003c\/h2\u003e\n\u003cp\u003e\n \u003cspan style=\"color: #636363; font-family: sans-serif;\"\u003e\n  1. F722 MCU has an inner inverter.\n \u003c\/span\u003e\n\u003c\/p\u003e\n\u003cp\u003e\n \u003cspan style=\"color: #636363; font-family: sans-serif;\"\u003e\n  2. SBUS、CRSF、ELRS、IBUS、DSM ETC... can be connected to any unused UART_RX ,we suggest you connect to Uart_RX2\n \u003c\/span\u003e\n\u003c\/p\u003e\n\u003cp\u003e\n \u003cspan style=\"color: #636363; font-family: sans-serif;\"\u003e\n  3. Frsky SmartPort，Tramp \u0026amp; Smartaudio can be connected to any unused UART_TX, we suggest you connect to Uart_TX1\n \u003c\/span\u003e\n\u003c\/p\u003e\n\u003cp\u003e\n \u003cspan style=\"color: #636363; font-family: sans-serif;\"\u003e\n  4. F.port can be connected to any unused UART_TX, we suggest you connect to Uart_TX2\n \u003c\/span\u003e\n\u003c\/p\u003e\n\u003cp\u003e\n \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/BF11373-BLITZ-MINI-F7.png?v=1754234292\"\u003e\n\u003c\/p\u003e\n","brand":"iFlight RC","offers":[{"title":"Default Title","offer_id":56578207089021,"sku":"695-957-A67","price":39.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/BLITZ-Mini-F7-FC-1000x1000-1.jpg?v=1753830958"},{"product_id":"iflight-blitz-mini-f4-flight-controller","title":"iFlight Blitz Mini F4 Flight Controller","description":"\u003ch2\u003e\n Features\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli style=\"font-weight: 400;\"\u003e\n  Improved circuit design, better components, and lower electrical noise!\n \u003c\/li\u003e\n \u003cli style=\"font-weight: 400;\"\u003e\n  DJI HD VTX Connector (Plug-and-Play \/ No soldering required)\n \u003c\/li\u003e\n \u003cli style=\"font-weight: 400;\"\u003e\n  FC indicator LEDs for visual debugging\n \u003c\/li\u003e\n \u003cli style=\"font-weight: 400;\"\u003e\n  With LC filter\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n Specifications\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  MCU：STM32F405\n \u003c\/li\u003e\n \u003cli\u003e\n  Gyro: MPU6000 \/ BMI270\n  \u003cstrong\u003e\n   (please note this IMU may change from batch to batch due to supply and pricing issues due to current chip shortages with MPU6000)\n  \u003c\/strong\u003e\n \u003c\/li\u003e\n \u003cli\u003e\n  Barometer: No\n \u003c\/li\u003e\n \u003cli\u003e\n  OSD Chip: AT7456E\n \u003c\/li\u003e\n \u003cli\u003e\n  Flash: 16MB (Blackbox flash)\n \u003c\/li\u003e\n \u003cli\u003e\n  UARTS: 6\n \u003c\/li\u003e\n \u003cli\u003e\n  Motor outputs: 4x (SH1.0 connector)\n \u003c\/li\u003e\n \u003cli\u003e\n  I2C serial: SDA \/ SLA pads\n \u003c\/li\u003e\n \u003cli\u003e\n  Smartaudio \/ IRC Tramp VTX protocol supported\n \u003c\/li\u003e\n \u003cli\u003e\n  LED controller: Yes\n \u003c\/li\u003e\n \u003cli\u003e\n  Beeper pad: Yes\n \u003c\/li\u003e\n \u003cli\u003e\n  Firmware target: IFRC-IFLIGHT_BLITZ_F405\n \u003c\/li\u003e\n \u003cli\u003e\n  Mount pattern: 20x20 mm \/ 4mm PCB hole diameter\n \u003c\/li\u003e\n \u003cli\u003e\n  Dimensions: 30.5x27 mm\n \u003c\/li\u003e\n \u003cli\u003e\n  Weight: 5g\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n Included\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  1x Flight Controller\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n Wiring Guide\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  \u003cspan style=\"color: #636363; font-family: sans-serif;\"\u003e\n   UART 1 for VTX HD \/ Analog\n  \u003c\/span\u003e\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003cspan style=\"color: #636363; font-family: sans-serif;\"\u003e\n   UART 2 for a Receiver\n  \u003c\/span\u003e\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003cspan style=\"color: #636363; font-family: sans-serif;\"\u003e\n   UART 3\/4\/5 for GPS or other sensors that require a serial port\n  \u003c\/span\u003e\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003cspan style=\"color: #636363; font-family: sans-serif;\"\u003e\n   UART 6 for ESC Telemetry\n  \u003c\/span\u003e\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n Tips\n\u003c\/h2\u003e\n\u003cp\u003e\n \u003cspan style=\"color: #636363; font-family: sans-serif;\"\u003e\n  1. F405 MCU has not inner UART inverter\n \u003c\/span\u003e\n\u003c\/p\u003e\n\u003cp\u003e\n \u003cspan style=\"color: #636363; font-family: sans-serif;\"\u003e\n  2. SBUS、CRSF、ELRS、IBUS、DSM ETC... can be connected to any unused UART_RX ,we suggest you connect to Uart_RX2\n \u003c\/span\u003e\n\u003c\/p\u003e\n\u003cp\u003e\n \u003cspan style=\"color: #636363; font-family: sans-serif;\"\u003e\n  3. Frsky SmartPort，Tramp \u0026amp; Smartaudio can be connected to any unused UART_TX, we suggest you connect to Uart_TX1\n \u003c\/span\u003e\n\u003c\/p\u003e\n\u003cp\u003e\n \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/BLITZ-F4-Mimi.png?v=1754234288\"\u003e\n\u003c\/p\u003e\n","brand":"iFlight RC","offers":[{"title":"Default Title","offer_id":56578208563581,"sku":"7D9-3AA-7B9","price":29.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/BLITZ-Mini-F4-Flight-Controller-1000x1000-1.jpg?v=1753830975"},{"product_id":"holybro-pixhawk-6x-autopilot-px4-kit","title":"Holybro Pixhawk 6X Autopilot PX4 Kit","description":"\u003cp\u003e\n Inside the Pixhawk®​ 6X, you can find an STMicroelectronics​® based STM32H753, paired with sensor technology from Bosch®​​, InvenSense®​,​ giving you flexibility and reliability for controlling any autonomous vehicle, suitable for both academic and commercial applications.\n\u003c\/p\u003e\n\u003cp\u003e\n The Pixhawk® 6X's H7 microcontroller contain the Arm® Cortex®-M7 core running up to 480 MHz, has 2MB flash memory and 1MB RAM. The PX4 Autopilot takes advantage of the increased power and RAM. Thanks to the updated processing power, developers can be more productive and efficient with their development work, allowing for complex algorithms and models.\n \u003cbr\u003e\n The FMUv6X open standard includes high-performance, low-noise IMUs on board, designed for better stabilization. Triple redundant IMU \u0026amp; double redundant barometer on separate buses. When the PX4 Autopilot detects a sensor failure, the system seamlessly switches to another to maintain flight control reliability.\n\u003c\/p\u003e\n\u003cp\u003e\n An independent LDO powers every sensor set with independent power control. A vibration isolation System to filter out high-frequency vibration and reduce noise to ensure accurate readings, allowing vehicles to reach better overall flight performances.\n\u003c\/p\u003e\n\u003cp\u003e\n External sensor bus (SPI5) has two chip select lines and data-ready signals for additional sensors and payload with SPI-interface, and with an integrated Microchip Ethernet PHY, high-speed communication with mission computers via ethernet is now possible.\n\u003c\/p\u003e\n\u003cp\u003e\n The Pixhawk®​ 6X is perfect for developers at corporate research labs, startups, academics (research, professors, students), and commercial application.\n\u003c\/p\u003e\n\u003cp\u003e\n \u003cimg alt=\"\" class=\"alignnone size-medium wp-image-697368\" height=\"1080\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/Pixhawk_baseboard_v2.webp?v=1754234196\" width=\"1920\"\u003e\n \u003cimg alt=\"\" class=\"alignnone size-medium wp-image-697369\" height=\"1080\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/pixhawk_6x_internal_Architecture_4b7b81a9-4470-4658-8c36-e49c4c453fe6.webp?v=1754234198\" width=\"1920\"\u003e\n \u003cimg alt=\"\" class=\"alignnone size-medium wp-image-697370\" height=\"1080\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/pixhawk_6x_autopilot_bus.webp?v=1754234201\" width=\"1920\"\u003e\n \u003cimg alt=\"\" class=\"alignnone size-medium wp-image-697371\" height=\"1080\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/Pixhawk_6x_IMU_Board.webp?v=1754234203\" width=\"1920\"\u003e\n \u003cimg alt=\"\" class=\"alignnone size-medium wp-image-697372\" height=\"1080\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/pixhawk_6x_FMU_Board.webp?v=1754234206\" width=\"1920\"\u003e\n \u003cimg alt=\"\" class=\"alignnone size-medium wp-image-697373\" height=\"1080\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/pixhawk_6x_Redundancy_Architecture.webp?v=1754234208\" width=\"1920\"\u003e\n \u003cimg alt=\"\" class=\"alignnone size-medium wp-image-697374\" height=\"1080\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/Pixhawk_baseboard_v2_Dimension.webp?v=1754234210\" width=\"1920\"\u003e\n\u003c\/p\u003e\n\u003cp\u003e\n The Rev 8 Version is supported in the PX4 1.14.3 release or later, as well as the Ardupilot 4.5.0 stable release or later. It ships with PX4 firmware by default. User can also use Ardupilot firmware by flashing the firmware via Mission Planner or QGroundControl.\n\u003c\/p\u003e\n\u003ch2\u003e\n Features\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  High performance STM32H753 Processor\n \u003c\/li\u003e\n \u003cli\u003e\n  Modular flight controller: separated IMU, FMU, and Base system connected by a 100-pin \u0026amp; a 50-pin Pixhawk®​ Autopilot Bus connector.\n \u003c\/li\u003e\n \u003cli\u003e\n  Redundancy: 3x IMU sensors \u0026amp; 2x Barometer sensors on separate buses\n \u003c\/li\u003e\n \u003cli\u003e\n  Triple redundancy domains: Completely isolated sensor domains with separate buses and separate power control\n \u003c\/li\u003e\n \u003cli\u003e\n  Newly designed vibration isolation system to filter out high frequency vibration and reduce noise to ensure accurate readings\n \u003c\/li\u003e\n \u003cli\u003e\n  Ethernet interface for high-speed mission computer integration\n \u003c\/li\u003e\n \u003cli\u003e\n  IMUs are temperature-controlled by onboard heating resistors, allowing optimum working temperature of IMUs\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n Pixhawk Baseboard v1 to v2\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  The Pixhawk Baseboard v1 has been replaced by the v2A \u0026amp; v2B, with the following updates\n \u003c\/li\u003e\n \u003cli\u003e\n  Smaller and More Compact Design: The overall footprint of the board has been reduced, making it easier to integrate into various applications.\n \u003c\/li\u003e\n \u003cli\u003e\n  New Robust Pin Header Design: Improved reliability with a improved pin header housing.\n \u003c\/li\u003e\n \u003cli\u003e\n  Added PWM Level Shifter: Allows PWM output signal levels to be switched from 3.3V to 5V via a resistor.\n \u003c\/li\u003e\n \u003cli\u003e\n  Change to Aluminum CNC Case: High-quality aluminum CNC outer case offers durability, efficient heat dissipation, corrosion resistance, aesthetic appeal, and EMI shielding.\n \u003c\/li\u003e\n \u003cli\u003e\n  Two Models Available: Model A and Model B, each with the pin header facing different directions for more flexibility in installation.\n \u003c\/li\u003e\n \u003cli\u003e\n  Relocated of Ports: UART4 \u0026amp; I2C, SPI, AD \u0026amp; IO, DSM RC, and JST USB ports have been moved from the top to the side of the board. AUX7, AUX8, and SBUS_OUT\/RSSI_IN move to the side in a JST-GH Port.\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n Specifications\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  FMU Processor: STM32H753\n \u003c\/li\u003e\n \u003cli\u003e\n  32 Bit Arm® Cortex®-M7, 480MHz, 2MB flash memory, 1MB RAM\n \u003c\/li\u003e\n \u003cli\u003e\n  IO Processor: STM32F100\n \u003c\/li\u003e\n \u003cli\u003e\n  32 Bit Arm® Cortex®-M3, 24MHz, 8KB SRAM\n \u003c\/li\u003e\n \u003cli\u003e\n  On-board sensors\n \u003c\/li\u003e\n \u003cli\u003e\n  3x ICM-45686 IMU sensors (±32g) with BalancedGyro™ technology\n \u003c\/li\u003e\n \u003cli\u003e\n  Mag: BMM150\n \u003c\/li\u003e\n \u003cli\u003e\n  Barometer: 2x BMP388\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n Electrical data\n\u003c\/p\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Voltage Ratings:\n \u003c\/li\u003e\n \u003cli\u003e\n  Max input voltage: 6V\n \u003c\/li\u003e\n \u003cli\u003e\n  USB Power Input: 4.75~5.25V\n \u003c\/li\u003e\n \u003cli\u003e\n  Servo Rail Input: 0~36V\n \u003c\/li\u003e\n \u003cli\u003e\n  Current Ratings:\n \u003c\/li\u003e\n \u003cli\u003e\n  Telem1 output current limiter: 1.5A\n \u003c\/li\u003e\n \u003cli\u003e\n  All other port combined output current limiter: 1.5A\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n Dimensions\n\u003c\/p\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Dimensions\n  \u003cul\u003e\n   \u003cli\u003e\n    Flight Controller Module: 38.8 x 31.8 x 14.6mm\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Standard Baseboard: 52.4 x 103.4 x 16.7mm\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Mini Baseboard: 43.4 x 72.8 x 14.2 mm\n   \u003c\/li\u003e\n  \u003c\/ul\u003e\n \u003c\/li\u003e\n \u003cli\u003e\n  Weight\n  \u003cul\u003e\n   \u003cli\u003e\n    Flight Controller Module: 23g\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Standard Baseboard: 51g\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Mini Baseboard: 26.5g\n   \u003c\/li\u003e\n  \u003c\/ul\u003e\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n Interfaces\n\u003c\/p\u003e\n\u003cul\u003e\n \u003cli\u003e\n  16- PWM servo outputs\n \u003c\/li\u003e\n \u003cli\u003e\n  R\/C input for Spektrum \/ DSM\n \u003c\/li\u003e\n \u003cli\u003e\n  Dedicated R\/C input for PPM and S.Bus input\n \u003c\/li\u003e\n \u003cli\u003e\n  Dedicated analog \/ PWM RSSI input and S.Bus output\n \u003c\/li\u003e\n \u003cli\u003e\n  4 general purpose serial ports\n  \u003cul\u003e\n   \u003cli\u003e\n    3 with full flow control\n   \u003c\/li\u003e\n   \u003cli\u003e\n    1 with separate 1.5A current limit (Telem1)\n   \u003c\/li\u003e\n   \u003cli\u003e\n    1 with I2C and additional GPIO line for external NFC reader\n   \u003c\/li\u003e\n  \u003c\/ul\u003e\n \u003c\/li\u003e\n \u003cli\u003e\n  2 GPS ports\n  \u003cul\u003e\n   \u003cli\u003e\n    1 full GPS plus Safety Switch Port\n   \u003c\/li\u003e\n   \u003cli\u003e\n    1 basic GPS port\n   \u003c\/li\u003e\n  \u003c\/ul\u003e\n \u003c\/li\u003e\n \u003cli\u003e\n  1 I2C port\n \u003c\/li\u003e\n \u003cli\u003e\n  1 Ethernet port\n  \u003cul\u003e\n   \u003cli\u003e\n    Transformerless Applications\n   \u003c\/li\u003e\n   \u003cli\u003e\n    100Mbps\n   \u003c\/li\u003e\n  \u003c\/ul\u003e\n \u003c\/li\u003e\n \u003cli\u003e\n  1 SPI bus\n  \u003cul\u003e\n   \u003cli\u003e\n    2 chip select lines\n   \u003c\/li\u003e\n   \u003cli\u003e\n    2 data-ready lines\n   \u003c\/li\u003e\n   \u003cli\u003e\n    1 SPI SYNC line\n   \u003c\/li\u003e\n   \u003cli\u003e\n    1 SPI reset line\n   \u003c\/li\u003e\n  \u003c\/ul\u003e\n \u003c\/li\u003e\n \u003cli\u003e\n  2 CAN Buses for CAN peripheral\n  \u003cul\u003e\n   \u003cli\u003e\n    CAN Bus has individual silent controls or ESC RX-MUX control\n   \u003c\/li\u003e\n  \u003c\/ul\u003e\n \u003c\/li\u003e\n \u003cli\u003e\n  2 Power input ports with SMBus\n  \u003cul\u003e\n   \u003cli\u003e\n    1 AD \u0026amp; IO port\n   \u003c\/li\u003e\n   \u003cli\u003e\n    2 additional analog input\n   \u003c\/li\u003e\n   \u003cli\u003e\n    1 PWM\/Capture input\n   \u003c\/li\u003e\n   \u003cli\u003e\n    2 Dedicated debug and GPIO lines\n   \u003c\/li\u003e\n  \u003c\/ul\u003e\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n Included\n\u003c\/h2\u003e\n\u003cp\u003e\n Standard Set\n\u003c\/p\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Pixhawk 6X Flight Controller Module\n \u003c\/li\u003e\n \u003cli\u003e\n  Pixhawk Standard Base \/ Pixhawk Mini Base\n \u003c\/li\u003e\n \u003cli\u003e\n  PM02D Power Module\n \u003c\/li\u003e\n \u003cli\u003e\n  Cable Set\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n Standard Set + M10 GPS\n\u003c\/p\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Pixhawk 6X Flight Controller Module\n \u003c\/li\u003e\n \u003cli\u003e\n  Pixhawk Standard Base \/ Pixhawk Mini Base\n \u003c\/li\u003e\n \u003cli\u003e\n  PM02D Power Module\n \u003c\/li\u003e\n \u003cli\u003e\n  Cable Set\n \u003c\/li\u003e\n \u003cli\u003e\n  M10 GPS\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n Resources\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  \u003ca href=\"https:\/\/docs.holybro.com\/autopilot\/pixhawk-6x\/overview\" rel=\"nofollow noopener\" target=\"_blank\"\u003e\n   Pixhawk 6X Wiki\/Documentation\n  \u003c\/a\u003e\n \u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"HolyBro","offers":[{"title":"Standard \/ Basic Set","offer_id":56578210955645,"sku":"H20300","price":269.95,"currency_code":"GBP","in_stock":false},{"title":"Standard \/ Basic Set + M10","offer_id":56578210988413,"sku":"H20301","price":289.95,"currency_code":"GBP","in_stock":false},{"title":"Mini \/ Basic Set","offer_id":56578211021181,"sku":"H20293","price":269.95,"currency_code":"GBP","in_stock":false},{"title":"Mini \/ Basic Set + M10","offer_id":56578211053949,"sku":"H20296","price":305.95,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/Pixhawk-6X-1.webp?v=1753830983"},{"product_id":"pixhawk-6x-standard-cable-set","title":"Pixhawk 6X Standard Cable Set","description":"\u003ch2\u003e\n Included\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  1x Cable Set for Pixhawk 6X Standard\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n Pixhawk 6X Connection Diagram\n\u003c\/h2\u003e\n\u003cp\u003e\n \u003cimg alt=\"\" class=\"alignnone size-full wp-image-623055\" height=\"3700\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/Pixhawk6X_Sample_Wiring-_Diagram_d6616177-3a7e-4744-af12-6c146533c2df.png?v=1754235411\" width=\"3500\"\u003e\n\u003c\/p\u003e\n","brand":"HolyBro","offers":[{"title":"Default Title","offer_id":56578215936381,"sku":"H18066","price":15.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/Pixhawk-6X-Cable-Set.webp?v=1753831032"},{"product_id":"pixhawk-6x-mini-cable-set","title":"Pixhawk 6X Mini Cable Set","description":"\u003ch2\u003e\n Included\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  1x Cable Set for Pixhawk 6X Mini\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n Pixhawk 6X Connection Diagram\n\u003c\/h2\u003e\n\u003cp\u003e\n \u003cimg alt=\"\" class=\"alignnone size-full wp-image-623055\" height=\"3700\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/Pixhawk6X_Sample_Wiring-_Diagram_12766554-a21a-4c71-b8e5-f7c822f9ec40.png?v=1754235408\" width=\"3500\"\u003e\n\u003c\/p\u003e\n","brand":"HolyBro","offers":[{"title":"Default Title","offer_id":56578218197373,"sku":"H18078","price":21.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/Pixhawk-6X-Mini-Cable-Set.webp?v=1753831045"},{"product_id":"tmotor-f4-6a-aio-5in1-flight-controller","title":"TMotor F4 6A AIO 5in1 Flight Controller","description":"\u003cp\u003e\n The T-Motor F4 13A 1S AIO board is a compact and lightweight electronic speed control (ESC) board that is perfect for building small drones. It is designed to support a single cell input voltage of 1S and can handle a continuous current of 6A and a peak current of 7A. The board features the BlueJay ESC firmware, an STM32F411 MCU, a BMI270 gyro, and an ELRS 2.4GHz V2 receiver. The board also includes a 48CH 50mW Smartaudio 1.0 video transmitter (VTX) for transmitting video signals. It measures 29.5x29.5mm and weighs just 6.7g, making it easy to install in a variety of drone frames. The board has 25.5x25.5mm M2 holes for mounting.\n\u003c\/p\u003e\n\u003ch2\u003e\n Specifications\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Input Voltage: 1S\n \u003c\/li\u003e\n \u003cli\u003e\n  Continuous Current: 6A\n \u003c\/li\u003e\n \u003cli\u003e\n  Peak Current: 7A\n \u003c\/li\u003e\n \u003cli\u003e\n  ESC Firmware: BlueJay\n \u003c\/li\u003e\n \u003cli\u003e\n  MCU: STM32F411\n \u003c\/li\u003e\n \u003cli\u003e\n  Gyro: BMI270\n \u003c\/li\u003e\n \u003cli\u003e\n  Receiver: SPI ELRS 2.4GHz V2\n \u003c\/li\u003e\n \u003cli\u003e\n  VTX: 48CH 50mW Smartaudio 1.0\n \u003c\/li\u003e\n \u003cli\u003e\n  Size: 29.5x29.5mm\n \u003c\/li\u003e\n \u003cli\u003e\n  Weight: 6.7g\n \u003c\/li\u003e\n \u003cli\u003e\n  Mounting Hole: 25.5x25.5mm (M2 Holes)\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n Included\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  1x T-Motor F4 6A 1S AIO With VTX + ELRS\n \u003c\/li\u003e\n \u003cli\u003e\n  Accessories (Gummies, Cable, Antenna)\n \u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"T-Motor","offers":[{"title":"Default Title","offer_id":56578219606397,"sku":"TM-06A-AIO","price":65.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/tmotor-06A-AIO-FC2.jpg?v=1753831052"},{"product_id":"pixhawk-base-carrier-board","title":"Pixhawk Base Carrier Board (Baseboard V2A)","description":"\u003cp\u003e\n This is the standard size base carrier board for the Pixhawk 6X, 5X FMU that has a few extra I\/O ports\n\u003c\/p\u003e\n\u003ch2\u003e\n Dimensions\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Standard Baseboard: 92.3x40.2mm\n \u003c\/li\u003e\n \u003cli\u003e\n  Weight\n  \u003cul\u003e\n   \u003cli\u003e\n    Standard Baseboard: 51g\n   \u003c\/li\u003e\n  \u003c\/ul\u003e\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n Included\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  1x Pixhawk Standard Baseboard V2A\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n Resources\n\u003c\/h2\u003e\n\u003cp\u003e\n \u003ca href=\"https:\/\/docs.holybro.com\/autopilot\/pixhawk-baseboards\/pixhawk-baseboard-v2-ports\"\u003e\n  Pixhawk Baseboard v2 Ports | Holybro Docs\n \u003c\/a\u003e\n\u003c\/p\u003e\n","brand":"HolyBro","offers":[{"title":"Default Title","offer_id":56578220163453,"sku":"H18117","price":104.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/SKU18117_8.webp?v=1753831058"},{"product_id":"pixhawk-6x-mini-base-carrier-board","title":"Pixhawk 6X Mini Base Carrier Board","description":"\u003cp\u003e\n This is the mini size base carrier board for the Pixhawk 6X FMU\n\u003c\/p\u003e\n\u003ch2\u003e\n Dimensions\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Standard Baseboard: 43.4 x 72.8 x 14.2 mm\n \u003c\/li\u003e\n \u003cli\u003e\n  Weight\n  \u003cul\u003e\n   \u003cli\u003e\n    Standard Baseboard: 26.5g\n   \u003c\/li\u003e\n  \u003c\/ul\u003e\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n Included\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  1x Pixhawk 6X Mini Baseboard\n \u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"HolyBro","offers":[{"title":"Default Title","offer_id":56578221048189,"sku":"H18074","price":63.95,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/Pixhawk-6x-Mini-base-1.webp?v=1753831070"},{"product_id":"axis-flying-istack-f722-flight-controller","title":"Axis Flying iStack F722 Flight Controller","description":"\u003cp\u003e\n \u003cimg alt=\"\" class=\"alignnone size-full wp-image-561405\" height=\"957\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/Axis-iStack-FC-ESC-3_1fc9cd6f-e6b5-4e0b-880d-3b7d6c361dd1.jpg?v=1754231418\" width=\"1175\"\u003e\n \u003cimg alt=\"\" class=\"alignnone size-full wp-image-561411\" height=\"917\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/Axis-iStack-FC-ESC-5.jpg?v=1754231421\" width=\"1175\"\u003e\n \u003cimg alt=\"\" class=\"alignnone size-full wp-image-561420\" height=\"1209\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/Axis-iStack-FC-ESC-8_9ec26b49-b60f-4a7d-a359-2abc07ab41f0.jpg?v=1754231424\" width=\"1175\"\u003e\n \u003cimg alt=\"\" class=\"alignnone size-full wp-image-561423\" height=\"1018\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/Axis-iStack-FC-ESC-9_5478c752-6590-423f-a1d7-2b080efb3cf1.jpg?v=1754231426\" width=\"1175\"\u003e\n \u003cimg alt=\"\" class=\"alignnone size-full wp-image-561426\" height=\"1466\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/Axis-iStack-FC-ESC-10.jpg?v=1754231428\" width=\"1175\"\u003e\n\u003c\/p\u003e\n\u003ch2\u003e\n iStack F722 Flight Controller Specifications\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  \u003cspan style=\"font-size: 14.4px;\"\u003e\n   Betaflight Firmware Target: AXISFLYING F7\n  \u003c\/span\u003e\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003cspan style=\"font-size: 14.4px;\"\u003e\n   MCU: STM32F777 32-bit processor\n  \u003c\/span\u003e\n \u003c\/li\u003e\n \u003cli\u003e\n  IMU: MPU6000\n \u003c\/li\u003e\n \u003cli\u003e\n  Barometer: QMP6988\n \u003c\/li\u003e\n \u003cli\u003e\n  Blackbox: 16Mb\n \u003c\/li\u003e\n \u003cli\u003e\n  UART Ports: 6\n \u003c\/li\u003e\n \u003cli\u003e\n  Input Voltage: 2-6S\n \u003c\/li\u003e\n \u003cli\u003e\n  BEC: 5V @3A\n \u003c\/li\u003e\n \u003cli\u003e\n  Size: 37.4x29.6mm\n \u003c\/li\u003e\n \u003cli\u003e\n  Mounting: 20x20mm\n \u003c\/li\u003e\n \u003cli\u003e\n  ESC Sensor: Supported\n \u003c\/li\u003e\n \u003cli\u003e\n  HD\/Analog FPV: Supported\n \u003c\/li\u003e\n \u003cli\u003e\n  LED\/Buzzer: Supported\n \u003c\/li\u003e\n \u003cli\u003e\n  GPS: Supported\n \u003c\/li\u003e\n \u003cli\u003e\n  X8 PWM Output: Supported\n \u003c\/li\u003e\n \u003cli\u003e\n  Plug and Play: Supported\n \u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"Axis Flying","offers":[{"title":"Default Title","offer_id":56578222260605,"sku":"94E-85B-45F","price":19.95,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/Axis-istack-F722-Flight-controller.jpg?v=1753831091"},{"product_id":"t-motor-13a-aio-flight-controller-sl4","title":"T Motor 13A AIO Flight Controller [SL4]","description":"\u003ch2\u003e\n Specifications\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Input Voltage: 1S\n \u003c\/li\u003e\n \u003cli\u003e\n  Continuous Current: 13A\n \u003c\/li\u003e\n \u003cli\u003e\n  ESC Firmware: BLHeli32\n \u003c\/li\u003e\n \u003cli\u003e\n  PWM Frequency: 24-96K\n \u003c\/li\u003e\n \u003cli\u003e\n  MCU: STM32F411\n \u003c\/li\u003e\n \u003cli\u003e\n  Gyro: BMI270\n \u003c\/li\u003e\n \u003cli\u003e\n  Size: 29.5x29.5mm\n \u003c\/li\u003e\n \u003cli\u003e\n  Weight: 5.7g\n \u003c\/li\u003e\n \u003cli\u003e\n  Mounting Hole: 25.5x25.5mm (M2 Holes)\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n Included\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  1x T-Motor F4 13A 1S AIO Board\n \u003c\/li\u003e\n \u003cli\u003e\n  Accessories Kit (Gummies, Cables)\n \u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"T-Motor","offers":[{"title":"Default Title","offer_id":56578223243645,"sku":"TM-13A-AIO","price":83.34,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/TM-13A-AIO.jpg?v=1753831104"},{"product_id":"hglrc-specter-f722-40a-aio-flight-controller-mpu6000","title":"HGLRC Specter F722 40A AIO Flight Controller MPU6000","description":"\u003cp\u003e\n Elevate your drone flying experience with the HGLRC Specter F722 4-6S AIO Whoop\/Toothpick Flight Controller, featuring a robust 40A 8Bit 4in1 ESC. This high-performance controller is a fusion of advanced technology and user-friendly design, making it a must-have for drone enthusiasts.\n\u003c\/p\u003e\n\u003ch3\u003e\n Product Overview:\n\u003c\/h3\u003e\n\u003cul\u003e\n \u003cli\u003e\n  \u003cstrong\u003e\n   High-Performance Processor\n  \u003c\/strong\u003e\n  : Equipped with an STM32F722 MCU for smooth and reliable operation.\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003cstrong\u003e\n   Advanced Gyroscope\n  \u003c\/strong\u003e\n  : Features the MPU6000 gyroscope, ensuring stable and responsive flight dynamics.\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003cstrong\u003e\n   Versatile Interfaces\n  \u003c\/strong\u003e\n  : Includes a camera, receiver, and a unique HD\/analog two-in-one direct plug interface for seamless connectivity.\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003cstrong\u003e\n   GPS Compatibility\n  \u003c\/strong\u003e\n  : Fully supports GPS modules, enhancing your navigation capabilities.\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003cstrong\u003e\n   Firmware Flexibility\n  \u003c\/strong\u003e\n  : Comes with BLS firmware pre-installed and the option to flash Bluejay firmware for improved flight efficiency.\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\n Key Specifications:\n\u003c\/h3\u003e\n\u003cul\u003e\n \u003cli\u003e\n  \u003cstrong\u003e\n   MCU\n  \u003c\/strong\u003e\n  : STM32F722 for top-notch processing power.\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003cstrong\u003e\n   MPU\n  \u003c\/strong\u003e\n  : MPU6000, providing accurate and stable gyroscopic feedback.\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003cstrong\u003e\n   BEC\n  \u003c\/strong\u003e\n  : Reliable 5V2A output.\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003cstrong\u003e\n   OSD and LED Support\n  \u003c\/strong\u003e\n  : Enhances user interface and visibility.\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003cstrong\u003e\n   Bee Narrator\n  \u003c\/strong\u003e\n  : A unique feature for flight status feedback.\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003cstrong\u003e\n   Current Ratings\n  \u003c\/strong\u003e\n  : Continuous current at 40A, with a peak of 50A for 10 seconds.\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003cstrong\u003e\n   Protocols Supported\n  \u003c\/strong\u003e\n  : DSHOT600, Oneshot, Multishot.\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003cstrong\u003e\n   Firmware\n  \u003c\/strong\u003e\n  : HGLRCF722AIO Flight Controller Firmware; BLS Electrochemical Firmware.\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003cstrong\u003e\n   Electrical Specs\n  \u003c\/strong\u003e\n  : 8-bit electric with 4-6S 14.8V-22.2V (lipo) input voltage.\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003cstrong\u003e\n   Dimensions\n  \u003c\/strong\u003e\n  : Compact size at 34x34mm, with 25.5x25.5mm.m2 mounting holes.\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003cstrong\u003e\n   Weight\n  \u003c\/strong\u003e\n  : Lightweight at just 9.8g.\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n \u003cimg class=\"alignnone size-medium\" height=\"14567\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/HGLRC-Specter-40aio_26fbed3c-67ab-421a-89a8-3c741eba6936.webp?v=1754234053\" width=\"1200\"\u003e\n\u003c\/p\u003e\n\u003ch3\u003e\n In the Box:\n\u003c\/h3\u003e\n\u003cul\u003e\n \u003cli\u003e\n  1x HGLRC Specter 40A 4-6S AIO Flight Controller.\n \u003c\/li\u003e\n \u003cli\u003e\n  Various cables and connectors including XT60 power cable, camera and receiver lines, and HD map passing lines.\n \u003c\/li\u003e\n \u003cli\u003e\n  Mounting accessories: shock reduction columns, screws, and self-lock M2 nuts.\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n This HGLRC Specter F722 AIO controller is ideal for 2-4 inch ring machines and toothpick racks, supporting a wide range of drones. Its inclusion of all necessary accessories ensures you have everything you need for a quick and easy setup. Whether you're a seasoned pilot or a beginner, this flight controller will take your flying to new heights!\n\u003c\/p\u003e\n","brand":"HGLRC","offers":[{"title":"Default Title","offer_id":56578224456061,"sku":"HG-SPK722-45A","price":68.94,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/HGLRCSpecterF7224-6SAIOWhoopToothpickFlightController_w40A8Bit4in1ESC_-MPU6000_1200x1200_72e49195-0082-409f-9951-aec994a748cb.jpg?v=1753831110"},{"product_id":"kakute-h7-bluetooth-flight-controller","title":"Kakute H7 Bluetooth Flight Controller","description":"\u003cp\u003e\n \u003cstrong\u003e\n  Ready to Ascend to New Heights? Meet the Holybro Kakute H7 V1.3 Flight Controller\n \u003c\/strong\u003e\n\u003c\/p\u003e\n\u003cp\u003e\n Tired of wrestling with flight controllers that feel like they're from the Stone Age? Stuck with wired connections that create more mess than they're worth? We hear your woes, dear FPV pilot. We know the struggle of the tangled wire, the unreliability of outdated tech, and the craving for seamless integration with the modern world.\n\u003c\/p\u003e\n\u003cp\u003e\n It's 2023, for crying out loud! Shouldn't flight controllers evolve like everything else? Why suffer with yesterday's technology, when your passion is pushing the limits and soaring through the skies? We feel your pain, and we're not just going to pat you on the back. We have the antidote to your air-borne ailments!\n\u003c\/p\u003e\n\u003cp\u003e\n \u003cstrong\u003e\n  Solution:\n \u003c\/strong\u003e\n Introducing the\n \u003cstrong\u003e\n  Holybro Kakute H7 V1.3 Flight Controller\n \u003c\/strong\u003e\n , the answer to all your FPV flying frustrations. It's so advanced; it might as well have a degree in aeronautical engineering!\n\u003c\/p\u003e\n\u003ch2\u003e\n Key Product Highlights:\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  \u003cstrong\u003e\n   USB-C Connectivity:\n  \u003c\/strong\u003e\n  Leave the old connections behind, embrace the future!\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003cstrong\u003e\n   9V 3A BEC for VTX:\n  \u003c\/strong\u003e\n  Ideal for HD video transmitters like DJI\/Caddx FPV Air Unit \u0026amp; Caddx Vista. We've got your view covered in HD!\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003cstrong\u003e\n   Integrated Bluetooth:\n  \u003c\/strong\u003e\n  Tune wirelessly on your phone with the SpeedyBee App. Because cables are for grandpas' radios!\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003cstrong\u003e\n   6x UARTs \u0026amp; Full Blackbox MicroSD Slot:\n  \u003c\/strong\u003e\n  It's like a Swiss army knife for your FPV needs, minus the awkward weight!\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003cstrong\u003e\n   Betaflight Configuration:\n  \u003c\/strong\u003e\n  Information at your fingertips. Literally!\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003cstrong\u003e\n   Autonomous Flight Ready:\n  \u003c\/strong\u003e\n  You'll feel like Tony Stark with this onboard barometer.\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n Whether you're an FPV rookie or a seasoned pilot, the Holybro Kakute H7 v1.3 has been engineered to perfection with the\n \u003cstrong\u003e\n  latest specifications\n \u003c\/strong\u003e\n such as MCU - STM32H743, IMU - MPU6000, and Barometer - BMP280, among others. But wait, did we mention the professional underfill epoxy for mechanical reinforcement? It's like putting on a suit of armor, without the clunkiness.\n\u003c\/p\u003e\n\u003cp\u003e\n Worry no more about compatibility, as it supports\n \u003cstrong\u003e\n  BetaFlight\n \u003c\/strong\u003e\n ,\n \u003cstrong\u003e\n  INAV\n \u003c\/strong\u003e\n , and\n \u003cstrong\u003e\n  ArduPilot\n \u003c\/strong\u003e\n . No more time wasted on head-scratching software issues.\n\u003c\/p\u003e\n\u003cp\u003e\n And if you order now, we'll throw in a packet of our patented anti-tangle thoughts, absolutely free! (Note: Thoughts are metaphorical, do not attempt to install them into the flight controller.)\n\u003c\/p\u003e\n\u003cp\u003e\n \u003cimg alt=\"\" class=\"alignnone size-full wp-image-671381\" height=\"1047\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/KakuteH7_v.13_Overview.webp?v=1754234734\" width=\"1440\"\u003e\n\u003c\/p\u003e\n\u003ch2\u003e\n Specifications\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  MCU - STM32H743 32-bit processor running at 480 MHz\n  \u003cul\u003e\n   \u003cli\u003e\n    Professional underfill epoxy for mechanical reinforcement\n   \u003c\/li\u003e\n  \u003c\/ul\u003e\n \u003c\/li\u003e\n \u003cli\u003e\n  IMU - MPU6000\n \u003c\/li\u003e\n \u003cli\u003e\n  Barometer - BMP280\n \u003c\/li\u003e\n \u003cli\u003e\n  OSD - AT7456E\n \u003c\/li\u003e\n \u003cli\u003e\n  Onboard Bluetooth chip - ESP32-C3\n  \u003cul\u003e\n   \u003cli\u003e\n    SpeedyBee IOS \u0026amp; Android App Compatible\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Note: The Bluetooth onboard is set to automatically turn off when the flight controller is unlocked (arm) and turn on automatically when the flight controller is locked (disarm) in Betaflight\n   \u003c\/li\u003e\n  \u003c\/ul\u003e\n \u003c\/li\u003e\n \u003cli\u003e\n  6x UARTs (1,2,3,4,6,7; UART2 is used for Bluetooth telemetry)\n \u003c\/li\u003e\n \u003cli\u003e\n  9x PWM Outputs (8 Motor Output, 1 LED)\n \u003c\/li\u003e\n \u003cli\u003e\n  2x JST-SH1.0 8pin ESC port (4in1 ESCs, x8\/Octocopter compatible)\n \u003c\/li\u003e\n \u003cli\u003e\n  1x JST-SH1.0 6pin VTX port (For HD System like Caddx Vista \u0026amp; Air Unit)\n \u003c\/li\u003e\n \u003cli\u003e\n  Battery input voltage: 2S - 8S\n \u003c\/li\u003e\n \u003cli\u003e\n  BEC 5V 2A Cont.\n \u003c\/li\u003e\n \u003cli\u003e\n  BEC 9V 3A Cont\n \u003c\/li\u003e\n \u003cli\u003e\n  USB Type-C\n \u003c\/li\u003e\n \u003cli\u003e\n  Mounting - 30.5 x 30.5mm\/Φ4mm hole with Φ3mm Grommets\n \u003c\/li\u003e\n \u003cli\u003e\n  Dimension - 35x35mm\n \u003c\/li\u003e\n \u003cli\u003e\n  Weight - 8g\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n Included in the Package:\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  1x Kakute H7 V1.3 Flight Controller\n \u003c\/li\u003e\n \u003cli\u003e\n  4x M3 Silicon Grommets\n \u003c\/li\u003e\n \u003cli\u003e\n  2x JST-SH1.0_8pin 150mm Cable (For ESCs)\n \u003c\/li\u003e\n \u003cli\u003e\n  2x JST-SH1.0_6pin 80mm \u0026amp; 150mm Cable (For DJI Air Unit)\n \u003c\/li\u003e\n \u003cli\u003e\n  1x JST-SH1.0_6pin Colored Silicon 150mm Cable (For Caddx HD System and other VTX)\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n Stop wallowing in wire-filled woes. Click that 'Add to Cart' button and fly your FPV to the future with the\n \u003cstrong\u003e\n  Holybro Kakute H7 V1.3 Flight Controller\n \u003c\/strong\u003e\n . After all, why should birds have all the fun?\n\u003c\/p\u003e\n","brand":"HolyBro","offers":[{"title":"Default Title","offer_id":56578233106813,"sku":"300-D03-6E5","price":41.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/Kakute-H7-3.webp?v=1753831142"},{"product_id":"zeez-f7-2020-betaflight-flight-controller-v3-sl4","title":"Zeez F7 2020 Betaflight Flight Controller V3 [SL4]","description":"\u003cp\u003e\n Attention all drone enthusiasts! Get ready to take your drone to new heights with the ZEEZ F7 V3 2020 flight controller - the ultimate upgrade for your DJI HD system. This powerhouse controller features 8 motor output and an on-board 9V@3A regulator to power your DJI Air Unit, with a simple plug and play configuration. Plus, with a 5V@3A regulator to power all peripherals, you'll have everything you need to take off and fly like a pro!\n\u003c\/p\u003e\n\u003cp\u003e\n We didn't stop there - we packed the ZEEZ F7 V3 2020 with top-of-the-line hardware, including a powerful F7 processor, ICM42688P Gyro, and BMP388 Barometer. With a separate power rail for the cleanest data, you'll have the most accurate and reliable readings. And with a standard 20x20 form factor, it's easy to integrate into your existing setup.\n\u003c\/p\u003e\n\u003cp\u003e\n But that's not all - the ZEEZ F7 V3 2020 also features 5 UARTS and an I2C port, 16MB FLASH for Blackbox data recording, an OSD chip for analog video, and is compatible with both DJI and Caddx Vista. And with 8 motor compatibility and bigger pads for easy assembly, you'll be flying high in no time.\n\u003c\/p\u003e\n\u003ch2\u003e\n Key product highlights:\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  8 motor output and on-board 9V@3A regulator for DJI Air Unit compatibility\n \u003c\/li\u003e\n \u003cli\u003e\n  Powerful F7 processor, ICM42688P Gyro, and BMP388 Barometer for top-of-the-line performance and accuracy\n \u003c\/li\u003e\n \u003cli\u003e\n  5 UARTS, I2C port, 16MB FLASH for Blackbox data recording, and OSD chip for analog video for unbeatable versatility\n \u003c\/li\u003e\n \u003cli\u003e\n  Compatible with DJI and Caddx Vista for maximum convenience and ease of use\n \u003c\/li\u003e\n \u003cli\u003e\n  Standard 20x20 form factor and bigger pads for hassle-free assembly.\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n \u003cimg alt=\"\" class=\"alignnone size-full wp-image-656918\" height=\"1000\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/2020_FCV3_Top_4x_d07525ac-29b7-4f23-b6df-224a6688aa8f.webp?v=1754238466\" width=\"866\"\u003e\n \u003cimg alt=\"\" class=\"alignnone size-full wp-image-656919\" height=\"1669\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/2020_FCV3_Bottom_4x_c87e9491-1c3f-4cc2-bc06-94094a5731b3.webp?v=1754238468\" width=\"785\"\u003e\n\u003c\/p\u003e\n\u003ch2\u003e\n Specifications\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Mounting holes: 20x20mm\n \u003c\/li\u003e\n \u003cli\u003e\n  LiPo Power input: 3S-6S\n \u003c\/li\u003e\n \u003cli\u003e\n  8 Motor output\n \u003c\/li\u003e\n \u003cli\u003e\n  BEC 5V-3A \/ 9V-3A\n \u003c\/li\u003e\n \u003cli\u003e\n  STM32F722 MCU\n \u003c\/li\u003e\n \u003cli\u003e\n  ICM42688P Gyro\/ACC\n \u003c\/li\u003e\n \u003cli\u003e\n  BMP388 Barometer\n \u003c\/li\u003e\n \u003cli\u003e\n  5 available UARTs\n \u003c\/li\u003e\n \u003cli\u003e\n  HD Plug for DJI Air Unit or Caddx Vista\n \u003c\/li\u003e\n \u003cli\u003e\n  Bigger pads\n \u003c\/li\u003e\n \u003cli\u003e\n  Onboard 16MB flash\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n Included\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  1x Zeez F7 V3 2020 Flight Controller\n \u003c\/li\u003e\n \u003cli\u003e\n  1x Connector Cable Pack\n \u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"Zeez Design","offers":[{"title":"Default Title","offer_id":56578238185853,"sku":"399-F14-D7C","price":39.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/Zeez-FC2020_Top-2.webp?v=1753831181"},{"product_id":"lumenier-lux-f4-hd-ultimate-flight-controller","title":"Lumenier LUX F4 HD Ultimate Flight Controller","description":"\u003cp\u003e\n The Lumenier LUX F4 HD Ultimate Flight Controller is an advanced and powerful flight controller from Lumenier. It uses a fast and relaible F4 processor along with premium hardware components. Unleash the capabilities of your Cinema (Cine-Lifter) drone or FPV Racing Quadcopter with the Lumenier LUX F4 Ultimate Flight Controller. The LUX F4 is packed full of features including a plug for DJI HD system, 3rd generation IMU ICM42688-P, dual plug-and-play 4in1 ESC ports, 12x PWM outputs, barometer, OSD, 6x UARTs, 9-16V BEC, dual analog camera inputs, easy soldering layout, and so much more!\n\u003c\/p\u003e\n\u003cp\u003e\n The LUX F4 builds on all the best features of its predecessors and further improves on hardware components and layout. You get an incredible 6x dedicated UART ports along with an onboard memory for black-box data logging. In addition, the LUX F4 can connect up to 12 PWM signals at once! That means it can easily support an Octo-copter, X8, or something even more creative with up to 12 PWM outputs. Eight of these outputs are plug-and-play ready with dual 4in1 ESC connectors right on the flight controller. Dual 4in1 ESC stacks + FC is super simple and clean now with the plug and play configuration.\n\u003c\/p\u003e\n\u003cp\u003e\n The integrated BetaFlight OSD makes it super simple to display important information on your FPV display like battery voltage, flight time, warnings, RSSI, smart audio features and more. Going digital instead? No problem, simply output the OSD data via an open UART on the plug and play harness for DJI FPV Air Unit.\n\u003c\/p\u003e\n\u003cp\u003e\n The features don't stop there! The LUX F4 has the ability to run 2 analog camera signals, with a built switching ability. This means you can run 2 cameras simultaneously and assign a switch via the PINIO feature in Betaflight to alternate between the 2 feeds at the flip of a switch. Installing a front and rear camera has never been easier!\n\u003c\/p\u003e\n\u003cp\u003e\n Have you ever been in an FPV race where you need to plug in your quad, but you don't want to broadcast an FPV signal to knock your friends out of the air? Or how about you crash, and need to save your VTX from burning up while baking in the hot sun. With the LUX F4 you can remotely turn your VTX on or off via a switch on your radio! The LUX features an on-board 3A 9-16V regulated power pad designed to power your video transmitter (Like DJI FPV Air Unit). Using the PINIO resource, you can assign this pad to a switch on your radio, remotely controlling the power source to your video transmitter.\n\u003c\/p\u003e\n\u003cp\u003e\n Long range quad and FPV plane pilots will also love the Lumenier LUX F4 . It has all the features you need to take full advantage of the long range and autonomous flight technology. The LUX F4 has an on-board barometer, buzzer pad, I2C pad, Ardupilot support, iNAV support, GPS\/compass pads, and up to 12 PWM inputs for a ton of servo and motor control.\n\u003c\/p\u003e\n\u003cp\u003e\n The Lumenier LUX F4 Ultimate is a very low profile board allowing it to be mounted in a variety of ways. Signal wires can be soldered directly to the break-out pads to save on size and weight or use the included plug and play cables. The LUX supports PPM or Serial RX (including FrSky, S.BUS, DSMX, etc.).\n\u003c\/p\u003e\n\u003cdiv data-appearance=\"contained\" data-content-type=\"row\" data-element=\"main\"\u003e\n \u003cdiv data-background-images=\"{}\" data-background-type=\"image\" data-element=\"inner\" data-enable-parallax=\"0\" data-parallax-speed=\"0.5\" data-pb-style=\"JYT2TNA\" data-video-fallback-src=\"\" data-video-lazy-load=\"true\" data-video-loop=\"true\" data-video-play-only-visible=\"true\"\u003e\n  \u003ch2 data-appearance=\"default\" data-content-type=\"heading\" data-element=\"main\"\u003e\n   Features\n  \u003c\/h2\u003e\n  \u003cdiv data-appearance=\"default\" data-content-type=\"text\" data-element=\"main\"\u003e\n   \u003cul\u003e\n    \u003cli\u003e\n     STM32F405 has 1MB flash which can run ArduPilot\/INAV\/BetaFlight\n    \u003c\/li\u003e\n    \u003cli\u003e\n     InvenSense the 3rd generation IMU ICM42688-P\n    \u003c\/li\u003e\n    \u003cli\u003e\n     9-60V(3~12S LiPo) wide input voltage and voltage sense. and a 9~16V BEC for DJI OSD or analog VTX.\n    \u003c\/li\u003e\n    \u003cli\u003e\n     8motors+3servos in INAV\/BF multirotor mixer.\n    \u003c\/li\u003e\n    \u003cli\u003e\n     2x SH1.0_8pin connector for PnP with 2x 4in1 ESC\n    \u003c\/li\u003e\n    \u003cli\u003e\n     1x SH1.0_6pin connector for PnP with HD System(Caddx Vista \u0026amp; Air Unit)\n    \u003c\/li\u003e\n    \u003cli\u003e\n     USB pin breakout for connecting to external USB adapter.\n    \u003c\/li\u003e\n   \u003c\/ul\u003e\n  \u003c\/div\u003e\n \u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv data-appearance=\"contained\" data-content-type=\"row\" data-element=\"main\"\u003e\n \u003cdiv data-background-images=\"{}\" data-background-type=\"image\" data-element=\"inner\" data-enable-parallax=\"0\" data-parallax-speed=\"0.5\" data-pb-style=\"S9OVTO9\" data-video-fallback-src=\"\" data-video-lazy-load=\"true\" data-video-loop=\"true\" data-video-play-only-visible=\"true\"\u003e\n \u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv data-appearance=\"contained\" data-content-type=\"row\" data-element=\"main\"\u003e\n \u003cdiv data-background-images=\"{}\" data-background-type=\"image\" data-element=\"inner\" data-enable-parallax=\"0\" data-parallax-speed=\"0.5\" data-pb-style=\"CTGBI3G\" data-video-fallback-src=\"\" data-video-lazy-load=\"true\" data-video-loop=\"true\" data-video-play-only-visible=\"true\"\u003e\n  \u003ch2 data-appearance=\"default\" data-content-type=\"heading\" data-element=\"main\"\u003e\n   Specifications\n  \u003c\/h2\u003e\n  \u003cdiv data-appearance=\"default\" data-content-type=\"text\" data-element=\"main\"\u003e\n   \u003cul\u003e\n    \u003cli\u003e\n     MCU: STM32F405RGT6\n    \u003c\/li\u003e\n    \u003cli\u003e\n     IMU: ICM42688-P\n    \u003c\/li\u003e\n    \u003cli\u003e\n     OSD: AT7456E, DJI OSD\n    \u003c\/li\u003e\n    \u003cli\u003e\n     Baro: SPL06-001 (I2C)\n    \u003c\/li\u003e\n    \u003cli\u003e\n     Blackbox: 16M-byte Flash memory\n    \u003c\/li\u003e\n    \u003cli\u003e\n     6x UARTs,  1x Softserial_Tx option\n    \u003c\/li\u003e\n    \u003cli\u003e\n     12x PWM outputs (8x Dshot)\n    \u003c\/li\u003e\n    \u003cli\u003e\n     1x I2C\n    \u003c\/li\u003e\n    \u003cli\u003e\n     4x ADC (VBAT, Current, RSSI, Airspeed)\n    \u003c\/li\u003e\n    \u003cli\u003e\n     2x PINIO\n    \u003c\/li\u003e\n    \u003cli\u003e\n     2x SH1.0_8pin connector for 4in1 ESC\n    \u003c\/li\u003e\n    \u003cli\u003e\n     1x SH1.0_6pin connector for HD System(Caddx Vista \u0026amp; Air Unit)\n    \u003c\/li\u003e\n    \u003cli\u003e\n     3x LEDs for FC STATUS (Blue, Green) and 3.3V indicator(Red)\n    \u003c\/li\u003e\n   \u003c\/ul\u003e\n   \u003ch2\u003e\n    Power\n   \u003c\/h2\u003e\n   \u003cul\u003e\n    \u003cli\u003e\n     Input: 9~60V (3~12S LiPo)\n    \u003c\/li\u003e\n    \u003cli\u003e\n     BEC: 5V 1.5A\n    \u003c\/li\u003e\n    \u003cli\u003e\n     BEC: Vx,  9~16V\/1~2A (3S IN\/9V 2A, 4S IN\/12V 2A, 6S IN\/16V 2A, 8S IN\/16V 1.5A, 12S IN\/16V 1A)\n    \u003c\/li\u003e\n    \u003cli\u003e\n     Battery Voltage Sensor: 1K:20K (INAV scale 2100, BF scale 210)\n    \u003c\/li\u003e\n    \u003cli\u003e\n     No Current Sensor built-in, supports external current sensor of PDB\/4in1\n    \u003c\/li\u003e\n   \u003c\/ul\u003e\n   \u003ch2\u003e\n    Firmware\n   \u003c\/h2\u003e\n   \u003cul\u003e\n    \u003cli\u003e\n     INAV: MATEKF405TE (Pre-loaded by default)\n     \u003cul\u003e\n      \u003cli\u003e\n       \u003cem\u003e\n        With INAV firmware, DSHOT can not work on S3, S5,S7 because of DMA clash,  use ONESHOT or MULTISHOT and calibrate ESC PWM range.\n       \u003c\/em\u003e\n      \u003c\/li\u003e\n     \u003c\/ul\u003e\n    \u003c\/li\u003e\n    \u003cli\u003e\n     BetaFlight: MATEKF405TE\n    \u003c\/li\u003e\n    \u003cli\u003e\n     ArduPilot: MatekF405-TE\n    \u003c\/li\u003e\n   \u003c\/ul\u003e\n   \u003ch2\u003e\n    Physical\n   \u003c\/h2\u003e\n   \u003cul\u003e\n    \u003cli\u003e\n     Mounting: 30.5 x 30.5mm, Φ4mm with Grommets Φ3mm\n    \u003c\/li\u003e\n    \u003cli\u003e\n     Dimensions: 36 x 36 x 5 mm (9mm max height including regulator board)\n    \u003c\/li\u003e\n    \u003cli\u003e\n     Weight: 8.5g\n    \u003c\/li\u003e\n   \u003c\/ul\u003e\n   \u003ch2 data-appearance=\"default\" data-content-type=\"heading\" data-element=\"main\"\u003e\n    Download Links\n   \u003c\/h2\u003e\n   \u003cdiv data-appearance=\"default\" data-content-type=\"text\" data-element=\"main\"\u003e\n    \u003cul\u003e\n     \u003cli\u003e\n      \u003cstrong\u003e\n       Manual:\n      \u003c\/strong\u003e\n      \u003cul\u003e\n       \u003cli\u003e\n        \u003ca href=\"https:\/\/getfpv-media.s3.amazonaws.com\/wysiwyg\/files\/Lumenier_LUX-F4HD_Manual_web.pdf\" rel=\"noopener\" tabindex=\"0\" target=\"_blank\"\u003e\n         Download the LUX F4 Ultimate Flight Controller User Manual\n        \u003c\/a\u003e\n       \u003c\/li\u003e\n      \u003c\/ul\u003e\n     \u003c\/li\u003e\n     \u003cli\u003e\n      \u003cstrong\u003e\n       Firmware:\n      \u003c\/strong\u003e\n      \u003cul\u003e\n       \u003cli\u003e\n        \u003cstrong\u003e\n         INAV\n        \u003c\/strong\u003e\n        : MATEKF405TE -\n        \u003ca href=\"https:\/\/github.com\/iNavFlight\/inav-configurator\/releases\" rel=\"noopener\" tabindex=\"0\" target=\"_blank\"\u003e\n         Download iNav Configurator\n        \u003c\/a\u003e\n        -\n        \u003ca href=\"https:\/\/github.com\/iNavFlight\/inav\/releases\" rel=\"noopener\" tabindex=\"0\" target=\"_blank\"\u003e\n         Latest iNav Firmware\n        \u003c\/a\u003e\n       \u003c\/li\u003e\n       \u003cli\u003e\n        \u003cstrong\u003e\n         BetaFlight\n        \u003c\/strong\u003e\n        : MATEKF405TE -\n        \u003ca href=\"https:\/\/github.com\/betaflight\/betaflight-configurator\/releases\" rel=\"noopener\" tabindex=\"0\" target=\"_blank\"\u003e\n         Download Betaflight Configurator\n        \u003c\/a\u003e\n        -\n        \u003ca href=\"https:\/\/github.com\/betaflight\/betaflight\/releases\" rel=\"noopener\" tabindex=\"0\" target=\"_blank\"\u003e\n         Latest Betaflight Firmware\n        \u003c\/a\u003e\n       \u003c\/li\u003e\n       \u003cli\u003e\n        \u003cstrong\u003e\n         ArduPilot:\n        \u003c\/strong\u003e\n        MatekF405-TE -\n        \u003ca href=\"https:\/\/ardupilot.org\/copter\/docs\/initial-setup.html\" rel=\"noopener\" tabindex=\"0\" target=\"_blank\"\u003e\n         Download ArduPilot Configurator\n        \u003c\/a\u003e\n        -\n        \u003ca href=\"https:\/\/ardupilot.org\/copter\/docs\/common-loading-firmware-onto-chibios-only-boards.html\" rel=\"noopener\" tabindex=\"0\" target=\"_blank\"\u003e\n         Latest ArduPilot Firmware\n        \u003c\/a\u003e\n       \u003c\/li\u003e\n      \u003c\/ul\u003e\n     \u003c\/li\u003e\n    \u003c\/ul\u003e\n   \u003c\/div\u003e\n   \u003ch2 data-appearance=\"default\" data-content-type=\"heading\" data-element=\"main\"\u003e\n    Includes\n   \u003c\/h2\u003e\n   \u003cdiv data-appearance=\"default\" data-content-type=\"text\" data-element=\"main\"\u003e\n    \u003cul\u003e\n     \u003cli\u003e\n      1x Lumenier LUX F4 HD Ultimate Flight Controller\n     \u003c\/li\u003e\n     \u003cli\u003e\n      1x Connecting Wire Set\n     \u003c\/li\u003e\n    \u003c\/ul\u003e\n   \u003c\/div\u003e\n  \u003c\/div\u003e\n \u003c\/div\u003e\n\u003c\/div\u003e\n","brand":"Lumenier","offers":[{"title":"Default Title","offer_id":56578248278397,"sku":"GFPV-18131","price":65.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/lumenier-lux-f4-hd-ultimate-flight-controller.jpg?v=1753831251"},{"product_id":"matek-f405-hdte-flight-controller","title":"Matek F405-HDTE Flight Controller","description":"\u003ch2\u003e\n Features\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  STM32F405 has 1MB flash which can run ArduPilot\/INAV\/BetaFlight\n \u003c\/li\u003e\n \u003cli\u003e\n  InvenSense the 3rd generation IMU ICM42688-P\n \u003c\/li\u003e\n \u003cli\u003e\n  9-60V(3~12S LiPo) wide input voltage and voltage sense. and a 9~16V BEC for DJI OSD or analog VTX.\n \u003c\/li\u003e\n \u003cli\u003e\n  8motors+3servos in INAV\/BF multirotor mixer.\n \u003c\/li\u003e\n \u003cli\u003e\n  2x SH1.0_8pin connector for PnP with 2x 4in1 ESC\n \u003c\/li\u003e\n \u003cli\u003e\n  1x SH1.0_6pin connector for PnP with HD System(Caddx Vista \u0026amp; Air Unit)\n \u003c\/li\u003e\n \u003cli\u003e\n  USB pin breakout for connecting to external USB adapter.\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n \u003cimg alt=\"\" class=\"alignnone size-medium wp-image-605262\" height=\"600\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/F405-HDTE_1_a1cabae0-e134-45b0-91be-96c5b5550b27.jpg?v=1754234955\" width=\"1500\"\u003e\n\u003c\/p\u003e\n\u003cp\u003e\n \u003cimg alt=\"\" class=\"alignnone size-full wp-image-605256\" height=\"2155\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/F405-HDTE_L_667c26d7-ad26-466c-99c4-2386202aa2dd.jpg?v=1754234959\" width=\"1500\"\u003e\n\u003c\/p\u003e\n\u003ch2\u003e\n Specifications\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  MCU: STM32F405RGT6\n \u003c\/li\u003e\n \u003cli\u003e\n  IMU: ICM42688-P\n \u003c\/li\u003e\n \u003cli\u003e\n  OSD: AT7456E, DJI OSD\n \u003c\/li\u003e\n \u003cli\u003e\n  Baro: SPL06-001 (I2C)\n \u003c\/li\u003e\n \u003cli\u003e\n  Blackbox: 16M-byte Flash memory\n \u003c\/li\u003e\n \u003cli\u003e\n  6x UARTs,  1x Softserial_Tx option\n \u003c\/li\u003e\n \u003cli\u003e\n  12x PWM outputs (8x Dshot)\n \u003c\/li\u003e\n \u003cli\u003e\n  1x I2C\n \u003c\/li\u003e\n \u003cli\u003e\n  4x ADC (VBAT, Current, RSSI, Airspeed)\n \u003c\/li\u003e\n \u003cli\u003e\n  2x PINIO\n \u003c\/li\u003e\n \u003cli\u003e\n  2x SH1.0_8pin connector for 4in1 ESC\n \u003c\/li\u003e\n \u003cli\u003e\n  1x SH1.0_6pin connector for HD System(Caddx Vista \u0026amp; Air Unit)\n \u003c\/li\u003e\n \u003cli\u003e\n  3x LEDs for FC STATUS (Blue, Green) and 3.3V indicator(Red)\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n \u003cli\u003e\n  9~16V(Vxs) output ON\/OFF switchable\n \u003c\/li\u003e\n \u003cli\u003e\n  Dual analog camera signal switchable\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n Power\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Input: 9~60V (3~12S LiPo)\n \u003c\/li\u003e\n \u003cli\u003e\n  BEC: 5V 1.5A\n \u003c\/li\u003e\n \u003cli\u003e\n  BEC: Vx,  9~16V\/1~2A (3S IN\/9V 2A, 4S IN\/12V 2A, 6S IN\/16V 2A, 8S IN\/16V 1.5A, 12S IN\/16V 1A)\n \u003c\/li\u003e\n \u003cli\u003e\n  Battery Voltage Sensor: 1K:20K (INAV scale 2100, BF scale 210)\n \u003c\/li\u003e\n \u003cli\u003e\n  No Current Sensor built-in, supports external current sensor of PDB\/4in1\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n Firmware\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  ArduPilot: MatekF405-TE\n \u003c\/li\u003e\n \u003cli\u003e\n  INAV: MATEKF405TE\n \u003c\/li\u003e\n \u003cli\u003e\n  BetaFlight: MATEKF405TE\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n Physical\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Mounting: 30.5 x 30.5mm, Φ4mm with Grommets Φ3mm\n \u003c\/li\u003e\n \u003cli\u003e\n  Dimensions: 36 x 36 x 5 mm\n \u003c\/li\u003e\n \u003cli\u003e\n  Weight: 7g\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n Included\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  1x FC F405-HDTE\n \u003c\/li\u003e\n \u003cli\u003e\n  6x Silicon grommets M4 to M3\n \u003c\/li\u003e\n \u003cli\u003e\n  1x SH1.0_8pin cable 5cm,  2x SH1.0_8pin connectors\n \u003c\/li\u003e\n \u003cli\u003e\n  1x SH1.0_6pin to GH1.25_8pin cable 8cm for HD System(Caddx Vista \u0026amp; Air Unit)\n \u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"Matek Systems","offers":[{"title":"Default Title","offer_id":56578258272637,"sku":"M-F405-HDTE","price":44.29,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/F405-HDTE_front.jpg?v=1753831321"},{"product_id":"t-motor-f7-hd-flight-controller","title":"T-Motor F7 HD Flight Controller","description":"\u003cp\u003e\n The HD version of the T-Motor F7 Flight Controller is specially designed to work directly with the DJI HD FPV System without soldering.  Plug-and-play with the DJI HD System has never been easier!\n\u003c\/p\u003e\n\u003ch2\u003e\n Specifications\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Brand name: T-motor\n \u003c\/li\u003e\n \u003cli\u003e\n  Item name: F7 HD Flight Controller\n \u003c\/li\u003e\n \u003cli\u003e\n  MCU: STMF722RET6\n \u003c\/li\u003e\n \u003cli\u003e\n  Gyro: MPU6000\/BMI270 depending on supply\n \u003c\/li\u003e\n \u003cli\u003e\n  RAM: on board 16Mb\n \u003c\/li\u003e\n \u003cli\u003e\n  Input Voltage: 12V-25-2V (3-6S)\n \u003c\/li\u003e\n \u003cli\u003e\n  BEC: 5V\/2A(Receiver), 10V\/2A(VTX)\n \u003c\/li\u003e\n \u003cli\u003e\n  Dimensions: 37mm x 37mm\n \u003c\/li\u003e\n \u003cli\u003e\n  Mounting Holes: 30.5mm x 30.5mm\n \u003c\/li\u003e\n \u003cli\u003e\n  Firmware Target: TMOTORF7 (Betaflight)\n \u003c\/li\u003e\n \u003cli\u003e\n  Weight: 8.4g\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n Includes\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  1 x T-Motor F7 HD Flight Controller\n \u003c\/li\u003e\n \u003cli\u003e\n  2 x FC to ESC Cable\n \u003c\/li\u003e\n \u003cli\u003e\n  4 x Vibration Dampeners\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/F7-HD.jpg?v=1754237157\"\u003e\n  \u003cimg alt=\"\" class=\"aligncenter size-full wp-image-337904\" height=\"2200\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/F7-HD.jpg?v=1754237157\" width=\"1200\"\u003e\n \u003c\/a\u003e\n\u003c\/p\u003e\n","brand":"T-Motor","offers":[{"title":"Default Title","offer_id":56578258993533,"sku":"BA1-F47-E9B","price":66.9,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/t-motor-f7-hd-flight-controller.jpg?v=1753831331"},{"product_id":"matek-h743-wlite-wing-flight-controller","title":"Matek H743-WLITE Wing Flight Controller","description":"\u003cp\u003e\n \u003cimg alt=\"\" class=\"alignnone size-full wp-image-607168\" height=\"600\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/H743-WLITE_1_473cd8f1-bd9b-4377-b1d0-800bfa55da7b.jpg?v=1754235009\" width=\"1500\"\u003e\n\u003c\/p\u003e\n\u003ch2\u003e\n FC Specifications\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  MCU: STM32H743VIH6, 480MHz , 512KB RAM, 2MB Flash\n \u003c\/li\u003e\n \u003cli\u003e\n  IMU: ICM42688-P\n \u003c\/li\u003e\n \u003cli\u003e\n  Baro: DPS310 (I2C2)\n \u003c\/li\u003e\n \u003cli\u003e\n  OSD: AT7456E\n \u003c\/li\u003e\n \u003cli\u003e\n  Blackbox: MicroSD card slot (SDIO)\n \u003c\/li\u003e\n \u003cli\u003e\n  7x Uarts (1,2,3,4,6,7,8) with built-in inversion.\n \u003c\/li\u003e\n \u003cli\u003e\n  13x PWM outputs(12+LED)\n \u003c\/li\u003e\n \u003cli\u003e\n  6x ADC (VBAT, Current, RSSI, Analog AirSpeed, VB2, CU2)\n \u003c\/li\u003e\n \u003cli\u003e\n  3x LEDs for FC STATUS (Blue, Red) and 3.3V indicator(Red)\n \u003c\/li\u003e\n \u003cli\u003e\n  2x I2C\n \u003c\/li\u003e\n \u003cli\u003e\n  1x CAN\n \u003c\/li\u003e\n \u003cli\u003e\n  USB\/Beep Extender with Type-C(USB2.0)\n \u003c\/li\u003e\n \u003cli\u003e\n  Dual Camera Inputs switch\n \u003c\/li\u003e\n \u003cli\u003e\n  9V(12V) for VTX power switch\n \u003c\/li\u003e\n \u003cli\u003e\n  High-precision Current Sense, 220A range\n \u003c\/li\u003e\n \u003cli\u003e\n  ADC VB2 voltage divider: 1K:20K\n \u003c\/li\u003e\n \u003cli\u003e\n  ADC AirSpeed voltage divider: 20K:20K\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n \u003cstrong\u003e\n  FC Firmware\n \u003c\/strong\u003e\n\u003c\/p\u003e\n\u003cul\u003e\n \u003cli\u003e\n  INAV: MATEKH743\n \u003c\/li\u003e\n \u003cli\u003e\n  ArduPilot: MATEKH743\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n \u003cstrong\u003e\n  PDB\n \u003c\/strong\u003e\n\u003c\/p\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Input voltage range: 6.8~30V (2~6S LiPo)\n \u003c\/li\u003e\n \u003cli\u003e\n  1x ESC power pads\n \u003c\/li\u003e\n \u003cli\u003e\n  Battery Voltage divider 1K:20K (Scale 2100 in INAV,  BATT_VOLT_MULT 21.0 in ArduPilot)\n \u003c\/li\u003e\n \u003cli\u003e\n  Current Senor: 220A,  3.3V ADC  (Scale 150 in INAV,  66.7 A\/V in ArduPilot)\n \u003c\/li\u003e\n \u003cli\u003e\n  Sense resistor: 90A continuous, 220A peak\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n \u003cstrong\u003e\n  BEC 5V output\n \u003c\/strong\u003e\n\u003c\/p\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Designed for Flight controller, Receiver, OSD, Camera, Buzzer, 2812 LED_Strip, Buzzer, GPS module, AirSpeed\n \u003c\/li\u003e\n \u003cli\u003e\n  Continuous current: 2 Amps, Max.3A\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n \u003cstrong\u003e\n  BEC 9V \/12V output\n \u003c\/strong\u003e\n\u003c\/p\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Designed for Video Transmitter, Camera, Gimbal ect.\n \u003c\/li\u003e\n \u003cli\u003e\n  Continuous current: 2 Amps, Max.3A\n \u003c\/li\u003e\n \u003cli\u003e\n  12V option with Jumper pad\n \u003c\/li\u003e\n \u003cli\u003e\n  for stable 9V\/12V output, input voltage should \u0026gt; output voltage +1V\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n \u003cstrong\u003e\n  BEC Vx output\n \u003c\/strong\u003e\n\u003c\/p\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Designed for Servos\n \u003c\/li\u003e\n \u003cli\u003e\n  Voltage adjustable, 5V Default, 6V or 7.2V via jumper\n \u003c\/li\u003e\n \u003cli\u003e\n  Continuous current: 8 Amps, Max.10A\n \u003c\/li\u003e\n \u003cli\u003e\n  for stable Vx output, input voltage should \u0026gt; Vx voltage +1V\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n \u003cstrong\u003e\n  BEC 3.3V output\n \u003c\/strong\u003e\n\u003c\/p\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Designed for Baro \/ Compass module and external 3.3V peripherals\n \u003c\/li\u003e\n \u003cli\u003e\n  Linear Regulator\n \u003c\/li\u003e\n \u003cli\u003e\n  Continuous current: 200mA\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n \u003cstrong\u003e\n  Physical\n \u003c\/strong\u003e\n\u003c\/p\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Mounting: 25 x 25mm, Φ2mm\n \u003c\/li\u003e\n \u003cli\u003e\n  Dimensions: 44 x 29 x 14.5 mm\n \u003c\/li\u003e\n \u003cli\u003e\n  Weight: 22g  w\/ USB\/buzzer adapter\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n Layout\n\u003c\/h2\u003e\n\u003cp\u003e\n \u003cimg alt=\"\" class=\"alignnone size-full wp-image-607171\" height=\"1819\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/H743-WLITE-layout_9b686389-aab4-4ca1-a2e1-b279d4cd29e8.jpg?v=1754235013\" width=\"1500\"\u003e\n\u003c\/p\u003e\n\u003ch2\u003e\n Included\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  1x H743-WLITE\n \u003c\/li\u003e\n \u003cli\u003e\n  1x USB(Type-C)\/Beep (Passive buzzer) Extender\n \u003c\/li\u003e\n \u003cli\u003e\n  1x 20cm JST-SH-6P to JST-SH-6P cable for USB extender.\n \u003c\/li\u003e\n \u003cli\u003e\n  2x 20cm JST-GH-4P to JST-GH-4P cable for CAN \u0026amp; I2C port\n \u003c\/li\u003e\n \u003cli\u003e\n  1x Rubycon ZLH 35V 470uF capacitor\n \u003c\/li\u003e\n \u003cli\u003e\n  Dupont 2.54 pins\n  \u003cstrong\u003e\n   (Board is shipped unsoldered)\n  \u003c\/strong\u003e\n \u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"Matek Systems","offers":[{"title":"Default Title","offer_id":56578259583357,"sku":"M-H743-WLITE","price":79.89,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/H743-WLITE-main.webp?v=1753831337"},{"product_id":"matek-ap_periph-dronecan-to-pwm-adapter-can-l4-pwm","title":"Matek AP_Periph DroneCAN to PWM Adapter - CAN-L4-PWM","description":"\u003cdiv data-appearance=\"contained\" data-content-type=\"row\" data-element=\"main\"\u003e\n \u003cdiv data-background-images=\"{}\" data-background-type=\"image\" data-element=\"inner\" data-enable-parallax=\"0\" data-parallax-speed=\"0.5\" data-pb-style=\"HWJ38NM\" data-video-fallback-src=\"\" data-video-lazy-load=\"true\" data-video-loop=\"true\" data-video-play-only-visible=\"true\"\u003e\n  \u003ch2 data-appearance=\"default\" data-content-type=\"heading\" data-element=\"main\"\u003e\n   Features\n  \u003c\/h2\u003e\n  \u003cdiv data-appearance=\"default\" data-content-type=\"text\" data-element=\"main\"\u003e\n   \u003cul\u003e\n    \u003cli\u003e\n     ArduPilot AP_Periph MatekL431-Dshot Firmware\n    \u003c\/li\u003e\n    \u003cli\u003e\n     AP_PERIPH DroneCan TO PWM Adapter\n    \u003c\/li\u003e\n    \u003cli\u003e\n     1 CAN, DroneCAN Protocol\n    \u003c\/li\u003e\n    \u003cli\u003e\n     9 PWM outputs (8x Dshot)\n    \u003c\/li\u003e\n    \u003cli\u003e\n     4.5-5.5V Voltage Range\n    \u003c\/li\u003e\n    \u003cli\u003e\n     LED Indicator Lights\n    \u003c\/li\u003e\n   \u003c\/ul\u003e\n  \u003c\/div\u003e\n \u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv data-appearance=\"contained\" data-content-type=\"row\" data-element=\"main\"\u003e\n \u003cdiv data-background-images=\"{}\" data-background-type=\"image\" data-element=\"inner\" data-enable-parallax=\"0\" data-parallax-speed=\"0.5\" data-pb-style=\"UTDYUG1\" data-video-fallback-src=\"\" data-video-lazy-load=\"true\" data-video-loop=\"true\" data-video-play-only-visible=\"true\"\u003e\n  \u003cimg alt=\"\" class=\"alignnone size-full wp-image-633482\" height=\"1896\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/MATEKSYS-AP-Periph-DroneCAN-to-PWM-Adapter-CAN-L4-PWM-Info.jpg?v=1754234923\" width=\"864\"\u003e\n \u003c\/div\u003e\n \u003cdiv data-background-images=\"{}\" data-background-type=\"image\" data-element=\"inner\" data-enable-parallax=\"0\" data-parallax-speed=\"0.5\" data-pb-style=\"UTDYUG1\" data-video-fallback-src=\"\" data-video-lazy-load=\"true\" data-video-loop=\"true\" data-video-play-only-visible=\"true\"\u003e\n  \u003cdiv data-appearance=\"contained\" data-content-type=\"row\" data-element=\"main\"\u003e\n   \u003cdiv data-background-images=\"{}\" data-background-type=\"image\" data-element=\"inner\" data-enable-parallax=\"0\" data-parallax-speed=\"0.5\" data-pb-style=\"Q44IS2O\" data-video-fallback-src=\"\" data-video-lazy-load=\"true\" data-video-loop=\"true\" data-video-play-only-visible=\"true\"\u003e\n    \u003ch2 data-appearance=\"default\" data-content-type=\"heading\" data-element=\"main\"\u003e\n     Specifications\n    \u003c\/h2\u003e\n    \u003cdiv data-appearance=\"default\" data-content-type=\"text\" data-element=\"main\"\u003e\n     \u003cul\u003e\n      \u003cli\u003e\n       LED: (Blue, Fast blinking, Booting)(Blue, Slow blinking, working)(Red, 3.3V indicator)\n      \u003c\/li\u003e\n      \u003cli\u003e\n       Firmware: ArduPilot AP_Periph MatekL431-Dshot (Update via DroneCAN GUI Tool)\n      \u003c\/li\u003e\n      \u003cli\u003e\n       \"Rx1\" pads are for ESC Telemetry, DO NOT connect ESC BEC output to Rx1 pad.\n      \u003c\/li\u003e\n      \u003cli\u003e\n       Input voltage range: 4.5~5.5V @5V pad\/pin\n      \u003c\/li\u003e\n      \u003cli\u003e\n       1.5x UARTs: UART1, RX1 - UART3, Tx3\/ Rx3\n      \u003c\/li\u003e\n      \u003cli\u003e\n       Operating Temperatures: -20~80 °C\n      \u003c\/li\u003e\n      \u003cli\u003e\n       Mounting: 20mm. Diameter - 3mm\n      \u003c\/li\u003e\n      \u003cli\u003e\n       MCU: STM32L431xC, 256KB Flash\n      \u003c\/li\u003e\n      \u003cli\u003e\n       ST debug, SWCLK \u0026amp; SWDIO\n      \u003c\/li\u003e\n      \u003cli\u003e\n       Power consumption: 30mA\n      \u003c\/li\u003e\n      \u003cli\u003e\n       Board Size: 32x25.4mm\n      \u003c\/li\u003e\n      \u003cli\u003e\n       Weight:3.5g\n      \u003c\/li\u003e\n     \u003c\/ul\u003e\n    \u003c\/div\u003e\n   \u003c\/div\u003e\n  \u003c\/div\u003e\n  \u003cdiv data-appearance=\"contained\" data-content-type=\"row\" data-element=\"main\"\u003e\n   \u003cdiv data-background-images=\"{}\" data-background-type=\"image\" data-element=\"inner\" data-enable-parallax=\"0\" data-parallax-speed=\"0.5\" data-pb-style=\"EAUV4PC\" data-video-fallback-src=\"\" data-video-lazy-load=\"true\" data-video-loop=\"true\" data-video-play-only-visible=\"true\"\u003e\n    \u003cdiv data-appearance=\"default\" data-content-type=\"text\" data-element=\"main\"\u003e\n     \u003cp\u003e\n      \u003cem\u003e\n       \u003cstrong\u003e\n        IMPORTANT NOTES\n       \u003c\/strong\u003e\n      \u003c\/em\u003e\n     \u003c\/p\u003e\n    \u003c\/div\u003e\n    \u003cdiv data-appearance=\"default\" data-content-type=\"text\" data-element=\"main\"\u003e\n     \u003cul\u003e\n      \u003cli\u003e\n       \"Vx\" pads are for powering servos via external BEC. \"Vx\" is not connected to other components on this board.\n      \u003c\/li\u003e\n     \u003c\/ul\u003e\n    \u003c\/div\u003e\n   \u003c\/div\u003e\n  \u003c\/div\u003e\n  \u003cdiv data-appearance=\"contained\" data-content-type=\"row\" data-element=\"main\"\u003e\n   \u003cdiv data-background-images=\"{}\" data-background-type=\"image\" data-element=\"inner\" data-enable-parallax=\"0\" data-parallax-speed=\"0.5\" data-pb-style=\"XVTPQ41\" data-video-fallback-src=\"\" data-video-lazy-load=\"true\" data-video-loop=\"true\" data-video-play-only-visible=\"true\"\u003e\n    \u003ch2 data-appearance=\"default\" data-content-type=\"heading\" data-element=\"main\"\u003e\n     Links\n    \u003c\/h2\u003e\n    \u003cdiv data-appearance=\"default\" data-content-type=\"text\" data-element=\"main\"\u003e\n     \u003cul\u003e\n      \u003cli\u003e\n       3D file:\n       \u003ca href=\"http:\/\/www.mateksys.com\/Downloads\/other\/CAN-L4-PWM_STEP.zip\" rel=\"noopener\" target=\"_blank\"\u003e\n        CAN-L4-PWM_STEP.zip\n       \u003c\/a\u003e\n      \u003c\/li\u003e\n     \u003c\/ul\u003e\n    \u003c\/div\u003e\n   \u003c\/div\u003e\n  \u003c\/div\u003e\n  \u003cdiv data-appearance=\"contained\" data-content-type=\"row\" data-element=\"main\"\u003e\n   \u003cdiv data-background-images=\"{}\" data-background-type=\"image\" data-element=\"inner\" data-enable-parallax=\"0\" data-parallax-speed=\"0.5\" data-pb-style=\"B68H97D\" data-video-fallback-src=\"\" data-video-lazy-load=\"true\" data-video-loop=\"true\" data-video-play-only-visible=\"true\"\u003e\n    \u003ch2 data-appearance=\"default\" data-content-type=\"heading\" data-element=\"main\"\u003e\n     Includes\n    \u003c\/h2\u003e\n    \u003cdiv data-appearance=\"default\" data-content-type=\"text\" data-element=\"main\"\u003e\n     \u003cul\u003e\n      \u003cli\u003e\n       1x MATEKSYS AP Periph DroneCAN to PWM Adapter - CAN-L4-PWM\n      \u003c\/li\u003e\n      \u003cli\u003e\n       1x JST-GH-4P to JST-GH-4P 20cm silicon wire\n      \u003c\/li\u003e\n     \u003c\/ul\u003e\n    \u003c\/div\u003e\n   \u003c\/div\u003e\n  \u003c\/div\u003e\n \u003c\/div\u003e\n\u003c\/div\u003e\n","brand":"Matek Systems","offers":[{"title":"Default Title","offer_id":56578260140413,"sku":"AP-PERIPH-CAN-L4-PWM","price":13.32,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/mateksys_ap_periph_dronecan_to_pwm_adapter_-_can-l4-pwm_2.jpg?v=1753831349"},{"product_id":"matek-f405-wte-elrs-wing-flight-controller","title":"Matek F405-WTE ELRS Wing Flight Controller","description":"\u003cp\u003e\n \u003cimg alt=\"\" class=\"alignnone size-full wp-image-607249\" height=\"600\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/F405-WTE_1_a7155aff-3e71-4bc4-add3-492b5ff09402.jpg?v=1754234991\" width=\"1500\"\u003e\n\u003c\/p\u003e\n\u003cp\u003e\n \u003cstrong\u003e\n  FC Specifications\n \u003c\/strong\u003e\n\u003c\/p\u003e\n\u003cul\u003e\n \u003cli\u003e\n  MCU: STM32F405RGT6, 168MHz , 1MB Flash\n \u003c\/li\u003e\n \u003cli\u003e\n  IMU: ICM42688-P\n \u003c\/li\u003e\n \u003cli\u003e\n  Baro: SPL06-001\n \u003c\/li\u003e\n \u003cli\u003e\n  OSD: AT7456E\n \u003c\/li\u003e\n \u003cli\u003e\n  Blackbox: MicroSD card slot\n \u003c\/li\u003e\n \u003cli\u003e\n  ESP WiFi Telemetry(MAVLink, 14dBm)\n \u003c\/li\u003e\n \u003cli\u003e\n  ExpressLRS 2.4G receiver(CRSF protocol, Telemetry 12dBm)\n \u003c\/li\u003e\n \u003cli\u003e\n  6x UARTs,  1x Softserial_Tx option(INAV)\n \u003c\/li\u003e\n \u003cli\u003e\n  12x PWM outputs\n \u003c\/li\u003e\n \u003cli\u003e\n  1x I2C\n \u003c\/li\u003e\n \u003cli\u003e\n  4x ADC (VBAT, Current, RSSI, Airspeed)\n \u003c\/li\u003e\n \u003cli\u003e\n  USB\/Beep Extender with Type-C(USB2.0)\n \u003c\/li\u003e\n \u003cli\u003e\n  Dual Camera Inputs switch\n \u003c\/li\u003e\n \u003cli\u003e\n  9V(12V) for VTX power switch\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n \u003cstrong\u003e\n  FC Firmware\n \u003c\/strong\u003e\n\u003c\/p\u003e\n\u003cul\u003e\n \u003cli\u003e\n  ArduPilot: MatekF405-TE\n \u003c\/li\u003e\n \u003cli\u003e\n  INAV: MATEKF405TE_SD (not available in INAV configurator 4.x)\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n \u003cstrong\u003e\n  PDB\n \u003c\/strong\u003e\n\u003c\/p\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Input voltage range: 6.8~30V (2~6S LiPo)\n \u003c\/li\u003e\n \u003cli\u003e\n  1x ESC power pads\n \u003c\/li\u003e\n \u003cli\u003e\n  Battery Voltage divider 1K:20K (Scale 2100 in INAV,  BATT_VOLT_MULT 21.0 in ArduPilot)\n \u003c\/li\u003e\n \u003cli\u003e\n  Current Senor: 220A,  3.3V ADC  (Scale 150 in INAV,  66.7 A\/V in ArduPilot)\n \u003c\/li\u003e\n \u003cli\u003e\n  Sense resistor: 90A continuous, 220A peak\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n \u003cstrong\u003e\n  BEC 5V output\n \u003c\/strong\u003e\n\u003c\/p\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Designed for Flight controller, Receiver, OSD, Camera, Buzzer, 2812 LED_Strip, Buzzer, GPS module, AirSpeed\n \u003c\/li\u003e\n \u003cli\u003e\n  Continuous current: 2 Amps, Max.3A\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n \u003cstrong\u003e\n  BEC 9V \/12V output\n \u003c\/strong\u003e\n\u003c\/p\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Designed for Video Transmitter, Camera, Gimbal ect.\n \u003c\/li\u003e\n \u003cli\u003e\n  Continuous current: 2 Amps, Max.3A\n \u003c\/li\u003e\n \u003cli\u003e\n  12V option with Jumper pad\n \u003c\/li\u003e\n \u003cli\u003e\n  for stable 9V\/12V output, input voltage should \u0026gt; output voltage +1V\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n \u003cstrong\u003e\n  BEC Vx output\n \u003c\/strong\u003e\n\u003c\/p\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Designed for Servos\n \u003c\/li\u003e\n \u003cli\u003e\n  Voltage adjustable, 5V Default, 6V or 7.2V via jumper\n \u003c\/li\u003e\n \u003cli\u003e\n  Continuous current: 8 Amps, Max.10A\n \u003c\/li\u003e\n \u003cli\u003e\n  for stable Vx output, input voltage should \u0026gt; Vx voltage +1V\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n \u003cstrong\u003e\n  BEC 3.3V output\n \u003c\/strong\u003e\n\u003c\/p\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Designed for Baro \/ Compass module and external 3.3V peripherals\n \u003c\/li\u003e\n \u003cli\u003e\n  Linear Regulator\n \u003c\/li\u003e\n \u003cli\u003e\n  Continuous current: 200mA\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n \u003cstrong\u003e\n  Physical\n \u003c\/strong\u003e\n\u003c\/p\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Mounting: 25 x 25mm, Φ2mm\n \u003c\/li\u003e\n \u003cli\u003e\n  Dimensions: 44 x 29 x 12.7mm\n \u003c\/li\u003e\n \u003cli\u003e\n  Weight: 22g  w\/ USB\/buzzer adapter\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n Layout\n\u003c\/h2\u003e\n\u003cp\u003e\n \u003cimg alt=\"\" class=\"alignnone size-full wp-image-607255\" height=\"1784\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/F405-WTE_layout_de4745a6-5166-4523-9092-38ed68981b65.jpg?v=1754234994\" width=\"1500\"\u003e\n\u003c\/p\u003e\n\u003ch2\u003e\n Included\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  1x F405-WTE\n \u003c\/li\u003e\n \u003cli\u003e\n  1x USB(Type-C)\/Beep (Passive buzzer) Extender + 20cm JST-SH-6P to JST-SH-6P cable for USB extender.\n \u003c\/li\u003e\n \u003cli\u003e\n  2x IPEX-MHF1 2.4G Antennas\n \u003c\/li\u003e\n \u003cli\u003e\n  1x Rubycon ZLH 35V 470uF capacitor\n \u003c\/li\u003e\n \u003cli\u003e\n  Dupont 2.54 pins\n  \u003cstrong\u003e\n   (Board is shipped unsoldered)\n  \u003c\/strong\u003e\n \u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"Matek Systems","offers":[{"title":"Default Title","offer_id":56578260402557,"sku":"M-F405-WTE","price":56.39,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/F405-WTE-main.jpg?v=1753831352"},{"product_id":"matek-f405-minite-betaflight-flight-controller","title":"Matek F405-MiniTE BetaFlight Flight Controller","description":"\u003cp\u003e\n \u003cimg alt=\"\" class=\"alignnone size-full wp-image-568026\" height=\"600\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/F405-miniTE_1_b1ec9190-014e-472a-a7e6-fa11f1b25f92.jpg?v=1754234977\" width=\"1500\"\u003e\n\u003c\/p\u003e\n\u003ch2\u003e\n Key Features\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  F405 has 1MB flash which can run with ArduPilot.  even with INAV firmware, some features will be removed on F722 due to limited flash.\n \u003c\/li\u003e\n \u003cli\u003e\n  The advantage of F722 is all UARTs have builtin inversion which is not needed when CRSF protocol is widely used on new receivers.\n \u003c\/li\u003e\n \u003cli\u003e\n  Redesigned target MATEKF405TE support 8x bi-directional DSHOT.\n \u003c\/li\u003e\n \u003cli\u003e\n  Support DJI air unit PnP, and a 10V BEC for DJI OSD or analog VTX\n \u003c\/li\u003e\n \u003cli\u003e\n  Compared with F722-miniSE 8motors or 6motor+2servos, F405-miniTE support 8motors+3servos in INAV\/BF multirotor mixer\n \u003c\/li\u003e\n \u003cli\u003e\n  InvenSense GEN3 IMU ICM42605\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n Specifications:\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  MCU: STM32F405RGT6\n \u003c\/li\u003e\n \u003cli\u003e\n  IMU: ICM42605\n \u003c\/li\u003e\n \u003cli\u003e\n  OSD: AT7456E\n \u003c\/li\u003e\n \u003cli\u003e\n  Baro: Goertek SPL06-001 (I2C)\n \u003c\/li\u003e\n \u003cli\u003e\n  Blackbox: 16M-byte Flash memory\n \u003c\/li\u003e\n \u003cli\u003e\n  6x UARTs,  1x Softserial_Tx option\n \u003c\/li\u003e\n \u003cli\u003e\n  12x PWM outputs (8x Dshot)\n \u003c\/li\u003e\n \u003cli\u003e\n  1x I2C\n \u003c\/li\u003e\n \u003cli\u003e\n  4x ADC (VBAT, Current, RSSI, Airspeed)\n \u003c\/li\u003e\n \u003cli\u003e\n  2x PINIO\n \u003c\/li\u003e\n \u003cli\u003e\n  1x SH1.0_8pin connector (Vbat\/G\/Curr\/R3\/S1\/S2\/S3\/S4)\n \u003c\/li\u003e\n \u003cli\u003e\n  1x SH1.0_6pin connector for DJI FPV Air Unit\n \u003c\/li\u003e\n \u003cli\u003e\n  3x LEDs for FC STATUS (Blue, Green) and 3.3V indicator(Red)\n \u003c\/li\u003e\n \u003cli\u003e\n  Dual BEC, 5V 1.7A \u0026amp; 10V 1.4A\n \u003c\/li\u003e\n \u003cli\u003e\n  10V output ON\/OFF switchable\n \u003c\/li\u003e\n \u003cli\u003e\n  Convertible 20mm to 30.5mm mounting\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\n \u003cstrong\u003e\n  Power\n \u003c\/strong\u003e\n\u003c\/h4\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Input: 6~30V (2~S LiPo)\n \u003c\/li\u003e\n \u003cli\u003e\n  BEC: 5V 1.7A,  Max.2A\n \u003c\/li\u003e\n \u003cli\u003e\n  BEC: 10V 1.4A  for VTX or DJI Air Unit\n \u003c\/li\u003e\n \u003cli\u003e\n  Battery Voltage Sensor: 1K:20K (INAV scale 2100, BF scale 210)\n \u003c\/li\u003e\n \u003cli\u003e\n  No Current Sensor built-in, supports external current sensor of PDB\/4in1\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\n \u003cstrong\u003e\n  Firmware\n \u003c\/strong\u003e\n\u003c\/h4\u003e\n\u003cul\u003e\n \u003cli\u003e\n  ArduPilot: MatekF405-TE\n \u003c\/li\u003e\n \u003cli\u003e\n  INAV: MATEKF405TE\n \u003c\/li\u003e\n \u003cli\u003e\n  BetaFlight: MATEKF405TE\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\n \u003cstrong\u003e\n  Physical\n \u003c\/strong\u003e\n\u003c\/h4\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Mounting\n  \u003cul\u003e\n   \u003cli\u003e\n    20 x 20mm\/Φ3mm with Silicon Grommets\n   \u003c\/li\u003e\n   \u003cli\u003e\n    20 x 20mm\/Φ2mm with Silicon \u0026amp; Brass Grommets\n   \u003c\/li\u003e\n   \u003cli\u003e\n    30.5 x 30.5mm\/Φ3mm with Conversion Plate and Silicon Grommets\n   \u003c\/li\u003e\n  \u003c\/ul\u003e\n \u003c\/li\u003e\n \u003cli\u003e\n  Dimensions:  28 x 28 mm\n \u003c\/li\u003e\n \u003cli\u003e\n  Weight: 5g\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n \u003cimg alt=\"\" class=\"alignnone size-full wp-image-568035\" height=\"2004\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/F405-miniTE_layout_b54f5f8e-641e-4401-a4d9-4e0911bdbb6f.jpg?v=1754234981\" width=\"1500\"\u003e\n\u003c\/p\u003e\n\u003ch2\u003e\n Included\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  1x FC F405-miniTE\n \u003c\/li\u003e\n \u003cli\u003e\n  1x 20mm to 30.5mm conversion plate(blue PCB)\n \u003c\/li\u003e\n \u003cli\u003e\n  6x Silicon grommets M4 to M3\n \u003c\/li\u003e\n \u003cli\u003e\n  6x Brass grommets M3 to M2\n \u003c\/li\u003e\n \u003cli\u003e\n  1x SH1.0_8pin cable 5cm (including 2x 8pin connectors) for 4in1 ESC\n \u003c\/li\u003e\n \u003cli\u003e\n  1x SH1.0_6pin to GH1.25_8pin cable 8cm for DJI Air Unit\n \u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"Matek Systems","offers":[{"title":"Default Title","offer_id":56578267513213,"sku":"101-ABC-AB7","price":50.7,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/F405-miniTE_top.jpg?v=1753831399"},{"product_id":"matek-h743-mini-v3-flight-controller","title":"Matek H743-MINI V3 Flight Controller","description":"\u003ch2\u003e\n FC Specifications\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  MCU: STM32H743VIT6, 480MHz , 1MB RAM, 2MB Flash\n \u003c\/li\u003e\n \u003cli\u003e\n  IMU: MPU6000 (SPI1) \u0026amp; ICM20602 (SPI4)\n \u003c\/li\u003e\n \u003cli\u003e\n  Baro: Infineon DPS310 (I2C2)\n \u003c\/li\u003e\n \u003cli\u003e\n  OSD: AT7456E (SPI2)\n \u003c\/li\u003e\n \u003cli\u003e\n  Blackbox: MicroSD card socket (SDIO)\n \u003c\/li\u003e\n \u003cli\u003e\n  5.5x Uarts (1,2,4,6,7, Rx8)\n \u003c\/li\u003e\n \u003cli\u003e\n  11x PWM outputs(S1~S10, LED)\n \u003c\/li\u003e\n \u003cli\u003e\n  2x I2C (I2C1\/DA1 CL1 pads, no I2C2 breakout)\n \u003c\/li\u003e\n \u003cli\u003e\n  1x CAN (C-H, C-L pads)\n \u003c\/li\u003e\n \u003cli\u003e\n  5x ADC (VBAT, Current, RSSI, VB2, CU2)\n \u003c\/li\u003e\n \u003cli\u003e\n  3x LEDs for FC STATUS (Blue, Red) and 3.3V indicator(Red)\n \u003c\/li\u003e\n \u003cli\u003e\n  1x JST-SH1.0_8pin connector (Vbat\/G\/Curr\/Rx8\/S1\/S2\/S3\/S4)\n \u003c\/li\u003e\n \u003cli\u003e\n  Dual Camera Inputs switch\n \u003c\/li\u003e\n \u003cli\u003e\n  8V power ON\/OFF switch\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n Power\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Vbat Input: 6.3~36V (2~8S LiPo)\n \u003c\/li\u003e\n \u003cli\u003e\n  BEC: 5V 1.5A cont. (Max.2A)\n \u003c\/li\u003e\n \u003cli\u003e\n  BEC: 8V 1.5A cont. (Max.2A), 8V outputs stable when Vbat\u0026gt;=10V, 8V outputs 80% of Vbat when Vbat\u0026lt; 10V\n \u003c\/li\u003e\n \u003cli\u003e\n  LDO 3.3V: 200mA\n \u003c\/li\u003e\n \u003cli\u003e\n  VB2 pad supports Max. 69V (voltage divider 1K:20K)\n \u003c\/li\u003e\n \u003cli\u003e\n  Static power: 200mA@5V with Betaflight, 150mA@5V with ArduPilot\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n FC Firmware\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  ArduPilot(ChiBiOS): MATEKH743\n \u003c\/li\u003e\n \u003cli\u003e\n  BetaFlight: MATEKH743\n \u003c\/li\u003e\n \u003cli\u003e\n  INAV: MATEKH743 (To be supported soon)\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n Physical\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Mounting : 20 x 20mm\/Φ3mm with Silicon Grommets , 20 x 20mm\/Φ2mm with Silicon \u0026amp; Brass Grommets\n \u003c\/li\u003e\n \u003cli\u003e\n  Dimensions: 36 x 28 x 6.5mm\n \u003c\/li\u003e\n \u003cli\u003e\n  Weight: 7g\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n Included\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  1x Matek Flight Controller H743-MINI\n \u003c\/li\u003e\n \u003cli\u003e\n  6x Silicon grommets M4 to M3\n \u003c\/li\u003e\n \u003cli\u003e\n  6x Brass grommets M3 to M2\n \u003c\/li\u003e\n \u003cli\u003e\n  1x JST-SH1.0_8pin cable, 5cm\n \u003c\/li\u003e\n \u003cli\u003e\n  2x JST-SH1.0_8pin connectors\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n \u003cimg alt=\"\" class=\"aligncenter size-full wp-image-425554\" height=\"800\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/matek-flight-controller-h743-mini-4.jpg?v=1754234997\" width=\"800\"\u003e\n \u003cimg alt=\"\" class=\"aligncenter size-full wp-image-425557\" height=\"2315\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/H743-mini_layout.jpg?v=1754235000\" width=\"1500\"\u003e\n\u003c\/p\u003e\n","brand":"Matek Systems","offers":[{"title":"Default Title","offer_id":56578273608061,"sku":"30F-B65-002","price":89.55,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/matek-flight-controller-h743-mini.jpg?v=1753831464"},{"product_id":"happymodel-x12-elrs-5in1-aio-flight-controller","title":"Happymodel X12 ELRS 5in1 AIO Flight Controller","description":"\u003cp\u003e\n The world first 5-IN-1 AIO flight controller, OPENVTX(up to 400mw), 12A Brushless Blheli_S ESC and Betaflight OSD coming out recently.  It comes with onboard SPI ELRS receiver which support ELRS TX module 2.x firmware, and also provide other receiver option like SPI Frsky receiver which support Frsky D8\/D16 , REDPINE and SFHSS. This is an amazing flight controller for Brushless whoop. You could get unbelievable RX and VTX range by using this flight controller.\n\u003c\/p\u003e\n\u003cp\u003e\n \u003cimg alt=\"\" class=\"alignnone size-full wp-image-622983\" height=\"212\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/X12-Diff.jpg?v=1754233950\" width=\"1000\"\u003e\n\u003c\/p\u003e\n\u003cp\u003e\n \u003cimg alt=\"\" class=\"alignnone size-full wp-image-609095\" height=\"485\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/X12-ELRS-V2-4_765c0884-1cbb-4dbd-b08b-7a4081a2f586.jpg?v=1754233953\" width=\"1000\"\u003e\n\u003c\/p\u003e\n\u003ch2\u003e\n Specification\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Brand Name: Happymodel\n \u003c\/li\u003e\n \u003cli\u003e\n  Item Name: X12 AIO 5-IN-1 Flight controller built-in 12A ESC and OPENVTX\n \u003c\/li\u003e\n \u003cli\u003e\n  Betaflight firmware target:\n  \u003cul\u003e\n   \u003cli\u003e\n    ELRS Version: CRAZYBEEF4SX1280\n   \u003c\/li\u003e\n  \u003c\/ul\u003e\n \u003c\/li\u003e\n \u003cli\u003e\n  VTX antenna: U.FL\n \u003c\/li\u003e\n \u003cli\u003e\n  Weight: 5.1g\n \u003c\/li\u003e\n \u003cli\u003e\n  Support\n  \u003cstrong\u003e\n   1-2S\n  \u003c\/strong\u003e\n  Lipo\/LIHV battery\n \u003c\/li\u003e\n \u003cli\u003e\n  Size: 30mm*30mm*8mm\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ctable width=\"785\"\u003e\n \u003ctbody\u003e\n  \u003ctr\u003e\n   \u003ctd width=\"170\"\u003e\n    \u003cstrong\u003e\n     Flight controller\n    \u003c\/strong\u003e\n   \u003c\/td\u003e\n   \u003ctd width=\"615\"\u003e\n    X12 ELRS V2.0 flight controller built-in ELRS 2.4G receiver Target: CRAZYBEEF4SX1280\n    \u003cbr\u003e\n    MCU:STM32F411CEU6 (100MHZ, 512K FLASH)\n    \u003cbr\u003e\n    Sensor: MPU6000 or ICM20689 or BMI270(SPI connection)\n    \u003cbr\u003e\n    Mount hole size: 25.5mm*25.5mm\n    \u003cbr\u003e\n    Power supply: 1-2S battery input (DC 2.9V-8.7V)\n    \u003cbr\u003e\n    Built-in 12A(each) Blheli_S 4in1 ESC\n    \u003cbr\u003e\n    Built-in Betaflight OSD(SPI Control)\n    \u003cbr\u003e\n    Built-in 5.8G OpenVTX 0mw~400mw\n    \u003cbr\u003e\n    Built-in ExpressLRS 2.4G,Frsky D8\/D16\n    \u003cbr\u003e\n    Built-in voltage meter sensor , voltage meter scale 110Built-in current meter sensor , current meter scale 470\n   \u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n   \u003ctd width=\"170\"\u003e\n    \u003cstrong\u003e\n     Onboard 4in1 ESC\n    \u003c\/strong\u003e\n   \u003c\/td\u003e\n   \u003ctd width=\"615\"\u003e\n    Power supply: 1-2S LiPo\/LiPo HV\n    \u003cbr\u003e\n    Current: 12A continuous peak 15A (3 seconds)\n    \u003cbr\u003e\n    Support BLHeliSuite programmable\n    \u003cbr\u003e\n    Factory firmware: Z_H_30_REV16_7.HEX\n    \u003cbr\u003e\n    Default protocol: DSHOT300\n    \u003cbr\u003e\n    Support Bluejay firmware\n    \u003cbr\u003e\n    When use Blujay firmware with 48khz, should set startup power to 1100\/1200\n   \u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n   \u003ctd width=\"170\"\u003e\n    \u003cstrong\u003e\n     Onboard SPI ExpressLRS 2.4GHz Receiver\n    \u003c\/strong\u003e\n   \u003c\/td\u003e\n   \u003ctd width=\"615\"\u003e\n    Packet Rate option: 50Hz\/150Hz\/250Hz\/500Hz\n    \u003cp\u003e\n     ExpressLRS Firmware version: V2.0\n     \u003cbr\u003e\n     RF Frequency: 2.4GHz\n     \u003cbr\u003e\n     Antenna : SMD antenna\n     \u003cbr\u003e\n     Telemetry output Power: \u0026lt;12dBm\n     \u003cbr\u003e\n     Receiver protocol:  SPI ExpressLRS\n     \u003cbr\u003e\n     Compatible with ExpressLRS V2.0 TX Module\n     \u003cbr\u003e\n     Couldn't flash separately ExpressLRS firmware\n    \u003c\/p\u003e\n   \u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n   \u003ctd width=\"170\"\u003e\n    \u003cstrong\u003e\n     Onboard Frsky SPI D8\/D16 receiver Version\n    \u003c\/strong\u003e\n   \u003c\/td\u003e\n   \u003ctd width=\"615\"\u003e\n    SPI BUS receiver\n    \u003cbr\u003e\n    CC2500 RF\n    \u003cbr\u003e\n    Compatible Non EU transmitter D8 model Channels: 8ch\n    \u003cbr\u003e\n    No ground interference ( Transmitter and receiver 1 m from the ground): 200meterFailsafe support\n    \u003cbr\u003e\n    Support Frsky D8\/ D16 , Redpine , SFHSS\n   \u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n   \u003ctd width=\"170\"\u003e\n    \u003cstrong\u003e\n     Onboard 5.8g OPENVTX\n    \u003c\/strong\u003e\n   \u003c\/td\u003e\n   \u003ctd width=\"615\"\u003e\n    Firmware version: OPENVTX\n    \u003cbr\u003e\n    Smartaudio v2.1\n    \u003cbr\u003e\n    PIT Mode support\n    \u003cbr\u003e\n    RCE Mode support\n    \u003cbr\u003e\n    Channels:48ch\n    \u003cbr\u003e\n    Transmitting Power: 0\/RCE\/25mw\/100mw\/400mw\n    \u003cbr\u003e\n    Power supply: DC 5V\n    \u003cbr\u003e\n    Current (5v): \u0026lt;650ma (400mw)\n    \u003cbr\u003e\n    Antenna connector: U.FL\n   \u003c\/td\u003e\n  \u003c\/tr\u003e\n \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\n\u003c\/p\u003e\n\u003ch2\u003e\n Included\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  1 x ELRS X12 ERLS AIO Flight Controller Board\n \u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"HappyModel","offers":[{"title":"Default Title","offer_id":56578278392189,"sku":"BAB-A69-0BA","price":47.9,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/X12-ELRS-V2-3.jpg?v=1753831482"},{"product_id":"cubepilot-cube-orange-module","title":"CubePilot Cube Orange+ Module","description":"\u003cp\u003e\n Looking for a reliable and feature-rich autopilot system for your drone or other autonomous vehicle? Look no further than the Cube Orange Plus Autopilot Module! With a faster H7 SOC, upgraded triple redundant IMUs, and a compact cube form factor, the Orange+ is designed to provide the performance you need.\n\u003c\/p\u003e\n\u003cp\u003e\n But the Orange+ doesn't just stop at basic flight control - its IMUs are mechanically isolated to reduce the impact of frame vibrations, and are temperature-controlled to ensure optimal performance in any conditions. And with full compatibility with the Cubepilot carrierboard, you can easily integrate the Orange+ into your commercial system. All inputs and outputs go through a convenient 80-pin DF17 connector, allowing for a plug-in solution that's perfect for manufacturers. You can even design your own carrier board to suit your specific needs now and in the future.\n\u003c\/p\u003e\n\u003cp\u003e\n Plus, with support for both Ardupilot and PX4 software, you can trust that the Orange+ will provide reliable and feature-rich performance. Don't miss out on this game-changing autopilot module - add the Cube Orange Plus to your cart today and take your flight capabilities to new heights!\n\u003c\/p\u003e\n\u003ch2\u003e\n Cube Orange Features\n\u003c\/h2\u003e\n\u003cp\u003e\n 1. Faster H7 SOC with 1MB ram.\n \u003cbr\u003e\n 2. Upgraded triple redundant IMU sensors for extra redundancy.\n \u003cbr\u003e\n 3. Two sets of IMU are vibration-isolated mechanically, reducing the effect of frame vibration to state estimation.\n \u003cbr\u003e\n 4. IMUs are temperature-controlled by onboard heating resistors, allowing optimum working temperature of IMUs.\n \u003cbr\u003e\n 5. The entire flight management unit(FMU) and inertial management unit(IMU) are housed in a reatively small form factor (a cube).\n \u003cbr\u003e\n 6. Fully Cubepilot carrierboard compatible, all inputs and outputs go through a 80-pin DF17 connector, allowing a plug-in solution for manufacturers of commercial systems.\n \u003cbr\u003e\n 7. Manufacturers can design their own carrier boards to suit their specific needs now and in the future.\n\u003c\/p\u003e\n\u003cp\u003e\n Vibration Damped IMU board version 3 (Fitted to Cube Orange+)\n\u003c\/p\u003e\n\u003cul\u003e\n \u003cli\u003e\n  ICM20948\n \u003c\/li\u003e\n \u003cli\u003e\n  ICM42688\n \u003c\/li\u003e\n \u003cli\u003e\n  MS5611 barometer\n \u003c\/li\u003e\n \u003cli\u003e\n  All sensors connected via SPI.\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n I\/O ports\n\u003c\/p\u003e\n\u003cul\u003e\n \u003cli\u003e\n  14 PWM servo outputs (8 from IO, 6 from FMU).\n \u003c\/li\u003e\n \u003cli\u003e\n  R\/C inputs for CPPM, Spektrum \/ DSM and S.Bus.\n \u003c\/li\u003e\n \u003cli\u003e\n  Analogue \/ PWM RSSI input.\n \u003c\/li\u003e\n \u003cli\u003e\n  S.Bus servo output.\n \u003c\/li\u003e\n \u003cli\u003e\n  5 general purpose serial ports, 2 with full flow control\n \u003c\/li\u003e\n \u003cli\u003e\n  Two I2C ports\n \u003c\/li\u003e\n \u003cli\u003e\n  One SPI port (un-buffered, for short cables only not recommended for use).\n \u003c\/li\u003e\n \u003cli\u003e\n  Two CAN Bus interface. (CAN FD for BlueH7 and Orange with CubePilot Logo)\n \u003c\/li\u003e\n \u003cli\u003e\n  3 Analogue inputs\n \u003c\/li\u003e\n \u003cli\u003e\n  High-powered piezo buzzer driver. (On expansion board)\n \u003c\/li\u003e\n \u003cli\u003e\n  High-power RGB LED. (I2C driver compatible Connected externally only)\n \u003c\/li\u003e\n \u003cli\u003e\n  Safety switch \/ LED.\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n Included\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  1pc Pixhawk Cube Orange+ FMU Module (IMU V8)\n \u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"CubePilot","offers":[{"title":"Default Title","offer_id":56578283340157,"sku":"HX4-06214","price":200.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/6fb93a74-fc21-494a-a93c-9cf0b16c9669.jpg?v=1753831524"},{"product_id":"iflight-defender-25-blitz-f7-aio-20a","title":"iFlight Defender 25 Blitz F7 AIO 20A","description":"\u003cp\u003e\n Look no further than the iFlight BLITZ F7 AIO. This new generation board is specifically designed for the Defender 25 and features an F745 flight controller, 20 ESC, and OSD. With pass-through DJI O3 and Caddx Vista\/Polar Connector, 32MB Onboard Flash Blackbox, STM32F745, 216MHz MCU, and ICM42688P and DPS310 Gyro, this all-in-one FC is future-proof and ready for flight firmware development like Betaflight, Emuflight and more. Lightweight, with minimum size and minimum work, just solder your motor wires on and you're ready to go! Upgrade your iFlight Defender 25 with the iFlight BLITZ F7 AIO and experience top-of-the-line performance.\n\u003c\/p\u003e\n\u003cdiv data-appearance=\"contained\" data-content-type=\"row\" data-element=\"main\"\u003e\n \u003cdiv data-background-images=\"{}\" data-background-type=\"image\" data-element=\"inner\" data-enable-parallax=\"0\" data-parallax-speed=\"0.5\" data-pb-style=\"RX0NP7A\" data-video-fallback-src=\"\" data-video-lazy-load=\"true\" data-video-loop=\"true\" data-video-play-only-visible=\"true\"\u003e\n  \u003ch2 data-appearance=\"default\" data-content-type=\"heading\" data-element=\"main\"\u003e\n   Features\n  \u003c\/h2\u003e\n  \u003cdiv data-appearance=\"default\" data-content-type=\"text\" data-element=\"main\"\u003e\n   \u003cul\u003e\n    \u003cli\u003e\n     Pass-through DJI O3 and Caddx Vista\/Polar Connector\n    \u003c\/li\u003e\n    \u003cli\u003e\n     32MB Onboard Flash Blackbox\n    \u003c\/li\u003e\n    \u003cli\u003e\n     STM32F745, 216MHz MCU\n    \u003c\/li\u003e\n    \u003cli\u003e\n     Weight: 12.8g\/0.2g\n    \u003c\/li\u003e\n    \u003cli\u003e\n     F745 FC + 20 ESC\n    \u003c\/li\u003e\n    \u003cli\u003e\n     ICM42688P Gyro\n    \u003c\/li\u003e\n    \u003cli\u003e\n     DPS310 Gyro\n    \u003c\/li\u003e\n    \u003cli\u003e\n     OSD Optional (only required if you plan to use an analog FPV System)\n    \u003c\/li\u003e\n   \u003c\/ul\u003e\n  \u003c\/div\u003e\n \u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv data-appearance=\"contained\" data-content-type=\"row\" data-element=\"main\"\u003e\n \u003cdiv data-background-images=\"{}\" data-background-type=\"image\" data-element=\"inner\" data-enable-parallax=\"0\" data-parallax-speed=\"0.5\" data-pb-style=\"S1IT5CA\" data-video-fallback-src=\"\" data-video-lazy-load=\"true\" data-video-loop=\"true\" data-video-play-only-visible=\"true\"\u003e\n  \u003ch2 data-appearance=\"default\" data-content-type=\"heading\" data-element=\"main\"\u003e\n   Specifications\n  \u003c\/h2\u003e\n  \u003cdiv data-appearance=\"default\" data-content-type=\"text\" data-element=\"main\"\u003e\n   \u003cp\u003e\n    \u003cstrong\u003e\n     IFLIGHT DEFENDER 25 F745 FC\n    \u003c\/strong\u003e\n   \u003c\/p\u003e\n   \u003cul\u003e\n    \u003cli\u003e\n     Smartaudio \/ IRC Tramp VTX protocol supported\n    \u003c\/li\u003e\n    \u003cli\u003e\n     Input voltage: 2-6S, support LIHV battery\n    \u003c\/li\u003e\n    \u003cli\u003e\n     Mounting pattern: 25.5x25.5mm \/3mm\n    \u003c\/li\u003e\n    \u003cli\u003e\n     FC Firmware：IFLIGHT_BLITZ_F7_AIO\n    \u003c\/li\u003e\n    \u003cli\u003e\n     Connector: SH1.0 to Type-C adapter\n    \u003c\/li\u003e\n    \u003cli\u003e\n     Blackbox: 32MB Onboard Flash\n    \u003c\/li\u003e\n    \u003cli\u003e\n     OSD: YES (HD VTX version)\n    \u003c\/li\u003e\n    \u003cli\u003e\n     Dimensions: 32.5*32.5mm\n    \u003c\/li\u003e\n    \u003cli\u003e\n     WS2812 LED Strip: Yes\n    \u003c\/li\u003e\n    \u003cli\u003e\n     BEC output: 5V 2.5A\n    \u003c\/li\u003e\n    \u003cli\u003e\n     Barometer: DPS310\n    \u003c\/li\u003e\n    \u003cli\u003e\n     MCU: STM32F745\n    \u003c\/li\u003e\n    \u003cli\u003e\n     Gyro: ICM42688P\n    \u003c\/li\u003e\n    \u003cli\u003e\n     Buzzer: Yes\n    \u003c\/li\u003e\n   \u003c\/ul\u003e\n   \u003cp\u003e\n    \u003cstrong\u003e\n     IFLIGHT DEFENDER 25 20 ESC\n    \u003c\/strong\u003e\n   \u003c\/p\u003e\n   \u003cul\u003e\n    \u003cli\u003e\n     Supports DShot DShot150\/300\/600\/MultiShot\/ OneShot etc.\n    \u003c\/li\u003e\n    \u003cli\u003e\n     ESC Telemetry: Yes（PCB routed, set UART6 for telemetry）\n    \u003c\/li\u003e\n    \u003cli\u003e\n     Output current: 20A, peak value 30A (10 seconds)\n    \u003c\/li\u003e\n    \u003cli\u003e\n     Input voltage: 2-6S Support LIHV battery\n    \u003c\/li\u003e\n    \u003cli\u003e\n     ESC firmware: IFLIGHT_BLITZ_G071_01\n    \u003c\/li\u003e\n    \u003cli\u003e\n     Current sensor: ratio 200 (1\/10mV\/A)\n    \u003c\/li\u003e\n    \u003cli\u003e\n     Bidirectional DShot: Yes\n    \u003c\/li\u003e\n    \u003cli\u003e\n     ESC MCU: STM32G071\n    \u003c\/li\u003e\n    \u003cli\u003e\n     Driver: FD6288\n    \u003c\/li\u003e\n    \u003cli\u003e\n     BEC: NO\n    \u003c\/li\u003e\n    \u003cli\u003e\n     OSD: Optional, not required if flying a Digital FPV system\n    \u003c\/li\u003e\n   \u003c\/ul\u003e\n  \u003c\/div\u003e\n \u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv data-appearance=\"contained\" data-content-type=\"row\" data-element=\"main\"\u003e\n \u003cdiv data-background-images=\"{}\" data-background-type=\"image\" data-element=\"inner\" data-enable-parallax=\"0\" data-parallax-speed=\"0.5\" data-pb-style=\"RAHD7WL\" data-video-fallback-src=\"\" data-video-lazy-load=\"true\" data-video-loop=\"true\" data-video-play-only-visible=\"true\"\u003e\n  \u003ch2 data-appearance=\"default\" data-content-type=\"heading\" data-element=\"main\"\u003e\n   Includes\n  \u003c\/h2\u003e\n  \u003cdiv data-appearance=\"default\" data-content-type=\"text\" data-element=\"main\"\u003e\n   \u003cul\u003e\n    \u003cli\u003e\n     1x iFlight Defender 25 BLITZ AIO - F745 FC + 20A ESC\n    \u003c\/li\u003e\n    \u003cli\u003e\n     1x Hardware Accessories Pack (contents may very depending on supply)\n    \u003c\/li\u003e\n   \u003c\/ul\u003e\n  \u003c\/div\u003e\n \u003c\/div\u003e\n\u003c\/div\u003e\n","brand":"iFlight RC","offers":[{"title":"HD FPV","offer_id":56578296349053,"sku":"B016612","price":85.54,"currency_code":"GBP","in_stock":false},{"title":"Analog OSD Chip","offer_id":56578296381821,"sku":"B016614","price":109.77,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/D25-AIO-1.webp?v=1753831626"},{"product_id":"t-motor-mini-racer-20x20-f7-flight-controller","title":"T-Motor Mini Racer 20x20 F7 Flight Controller","description":"\u003cp\u003e\n Introducing the T-Motor Mini Racer F7: Your Tiny Titan for Terrific Flights!\n\u003c\/p\u003e\n\u003cp\u003e\n Are you tired of bulky flight controllers weighing down your drone? Fear not, for the T-Motor Mini Racer F7 is here to save the day! This 3-6S 20x20 mini flight controller is packed with impressive features and designed for easy maintenance, giving you the perfect blend of power and convenience.\n\u003c\/p\u003e\n\u003cp\u003e\n 🚀 Ladies and gentlemen, hold on to your propellers, because this pint-sized powerhouse comes with a 16MB Blackbox flash memory, a 5V.2A BEC, and an ultra-precise BMI270 gyro. It's like having a tiny superhero on board, ready to make your drone flights smoother and more stable than ever before.\n\u003c\/p\u003e\n\u003cp\u003e\n 🏁 Now, let's dive into the nitty-gritty. The T-Motor Mini Racer F7 boasts some seriously impressive features:\n\u003c\/p\u003e\n\u003col\u003e\n \u003cli\u003e\n  USB Power Support: No LiPo? No problem! Power it up via USB.\n \u003c\/li\u003e\n \u003cli\u003e\n  Lightweight Design: Less weight means more fun in the air!\n \u003c\/li\u003e\n \u003cli\u003e\n  16M Blackbox Flash Memory: Store your flight data like a boss.\n \u003c\/li\u003e\n \u003cli\u003e\n  Gyro Low Dropout Regulator: Ensures a stable performance for your drone.\n \u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\n 🤓 Still not convinced? Well, how about a USB-C connection, IMU BMI270, and 4 UARTS for all your drone's communication needs? With this flight controller, you'll be the envy of every drone pilot in the neighbourhood!\n\u003c\/p\u003e\n\u003cp\u003e\n 💥 Get ready to elevate your drone experience with the T-Motor Mini Racer F7. Included in your purchase are: 1x T-Motor Mini Racer 20x20 F7 Flight Controller 1x Connector Wire 4x Damping Grommets (Pre-Installed)\n\u003c\/p\u003e\n\u003ch2\u003e\n Specifications:\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Mounting Hole: 20x20mm M3\n \u003c\/li\u003e\n \u003cli\u003e\n  MCU: STM32F722RET6\n \u003c\/li\u003e\n \u003cli\u003e\n  BEC: 5V\/2A (Peak 2.5A)\n \u003c\/li\u003e\n \u003cli\u003e\n  Dimensions: 31x30mm\n \u003c\/li\u003e\n \u003cli\u003e\n  Blackbox: YES (16MB)\n \u003c\/li\u003e\n \u003cli\u003e\n  Input Voltage: 3-6S\n \u003c\/li\u003e\n \u003cli\u003e\n  Gyro: BMI270\n \u003c\/li\u003e\n \u003cli\u003e\n  Weight: 4.7g\n \u003c\/li\u003e\n \u003cli\u003e\n  OSD: YES\n \u003c\/li\u003e\n \u003cli\u003e\n  UARTs: 4\n \u003c\/li\u003e\n \u003cli\u003e\n  FIrmware Target: TMPacerF7Mini\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n Don't miss out on the fun, and grab your T-Motor Mini Racer F7 today from Unmanned Tech. Let the drone adventures begin!\n\u003c\/p\u003e\n\u003cp\u003e\n \u003cimg alt=\"\" class=\"alignnone size-full wp-image-573368\" height=\"1373\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/T-Motor-Mini-Racer-20x20-F7-Flight-Controller-Infographic1.jpg?v=1754237235\" width=\"940\"\u003e\n \u003cimg alt=\"\" class=\"alignnone size-full wp-image-573371\" height=\"1336\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/T-Motor-Mini-Racer-20x20-F7-Flight-Controller-Infographic2.jpg?v=1754237237\" width=\"940\"\u003e\n \u003cimg alt=\"\" class=\"alignnone size-full wp-image-573365\" height=\"907\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/T-Motor-Mini-Racer-20x20-F7-Flight-Controller-Infographic.jpg?v=1754237240\" width=\"940\"\u003e\n\u003c\/p\u003e\n\u003cp\u003e\n Please note, the firmware target for this FC is\n \u003cstrong\u003e\n  TMPacer F7 Mini\n \u003c\/strong\u003e\n\u003c\/p\u003e\n\u003ch2\u003e\n Includes\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  1x T-Motor Mini Racer 20x20 F7 Flight Controller\n \u003c\/li\u003e\n \u003cli\u003e\n  1x Connector Wire\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n\u003c\/p\u003e\n","brand":"T-Motor","offers":[{"title":"Default Title","offer_id":56578297332093,"sku":"A97-70D-B08","price":51.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/Tmotor-Mini-Racer-FC-1.jpg?v=1753831640"},{"product_id":"hobbywing-xrotor-f7-convertible-flight-controller","title":"Hobbywing XRotor F7 Convertible Flight Controller","description":"\u003cp\u003eGet ready to fly like a pro with the XRotor F7 Convertible Flight Controller from Hobbywing! This bad boy is packed with super hardware and lightning fast running speed, thanks to its STM32F722 MCU and high sensitivity ICM20602 six-axis motion sensor. Plus, it's fully equipped to support bidirectional DShot digital throttle communication.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv style=\"position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; margin: 10px 0;\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/o1SzRl8v85o\" style=\"position: absolute; top: 0; left: 0; width: 100%; height: 100%;\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003cp\u003eBut that's not all, this flight controller also comes with a special interface for the DJI image transmission system, allowing for seamless plug-and-play action. And let's not forget about the on-board 5V \u0026amp; 12V dual BEC circuit, which will give you the power to run all your image transmission and 12V LED devices.\u003c\/p\u003e\n\u003cp\u003eAnd the XRotor F7 doesn't just support one type of firmware, oh no. It supports BetaFlight, Cleanflight, Butterflight, iNav, and other mainstream FPV firmware, so you can customize your flying experience to your exact specifications. Plus, it's designed with a unique installation design and shock absorption structure, making it more stable and accurate in flight.\u003c\/p\u003e\n\u003cp\u003eIt's also a perfect match for Hobbywing ESC and has volt\/amp monitoring port, buzzer output port, Micro USB port, switch module of board load graphic transmission and double M3 mounting holes with damping aprons making it even more convenient to use. \u003cbr\u003eUpgrade your flying game with the XRotor F7 Convertible Flight Controller from Hobbywing!\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eEquipped with STM32F722 MCU which has powerful computing ability and fast running speed, and high sensitivity ICM20602 six-axis motion sensor.\u003c\/li\u003e\n\u003cli\u003eSupports BetaFlight, Cleanflight, Butterflight, Inva, and other mainstream FPV firmware.\u003c\/li\u003e\n\u003cli\u003eDJI image transmission system port equipped with corresponding flat cable\u003c\/li\u003e\n\u003cli\u003eSupports bidirectional DShot digital throttle communication.\u003c\/li\u003e\n\u003cli\u003eUnique installation design and shock absorption structure.\u003c\/li\u003e\n\u003cli\u003eOn-board large capacity Flash memory chip.\u003c\/li\u003e\n\u003cli\u003eOn-board 5V \u0026amp; 12V dual BEC circuit.\u003c\/li\u003e\n\u003cli\u003eOn-board Pit Switch module.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg class=\"alignnone size-medium\" height=\"3197\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/Hobbywing-XRotor-F7-Convertible-Flight-Controller-Infographic.jpg?v=1754234126\" width=\"1200\"\u003e\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCompatible with (Modes): PWM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600, DShot1200, Proshot1000 and etc\u003c\/li\u003e\n\u003cli\u003eCompatible with (Transmitters): PPM, Spektrum, SBUS, SUMD, SUMH, XBUS, IBUS, JETIEXBUS, CRSF, SRXL\u003c\/li\u003e\n\u003cli\u003eMounting Holes: Convertible 20x20mm \/ 30.5x30.5mm\u003c\/li\u003e\n\u003cli\u003eProgramming via: Betaflight\/Cleanflight-configurator\u003c\/li\u003e\n\u003cli\u003eFirmware: HOBBYWING_XROTORF7CONV\u003c\/li\u003e\n\u003cli\u003eVoltage Monitoring: Supported\u003c\/li\u003e\n\u003cli\u003eCurrent Monitoring: Supported\u003c\/li\u003e\n\u003cli\u003eFC Programming: Supported\u003c\/li\u003e\n\u003cli\u003eExternal Buzzer: Supported\u003c\/li\u003e\n\u003cli\u003eBEC: 5V@1.5: 10V@1.5A\u003c\/li\u003e\n\u003cli\u003eLED Control: Supported\u003c\/li\u003e\n\u003cli\u003eUSB Port: MicroUSB\u003c\/li\u003e\n\u003cli\u003eSize: 32x32mm\u003c\/li\u003e\n\u003cli\u003eOSD: Built-in\u003c\/li\u003e\n\u003cli\u003eWeight: 3.3g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eManual\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.hobbywing.com\/products\/enpdf\/XRotorMicoFlightConolerF7en.pdf\" rel=\"noopener\" target=\"_blank\"\u003e Hobbywing XRotor F7 FC \u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eIncludes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x Hobbywing XRotor F7 Convertible Flight Controller\u003c\/li\u003e\n\u003cli\u003e1x Soft Mounting Grommets Set\u003c\/li\u003e\n\u003cli\u003e1x Signal Cable\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"HobbyWing","offers":[{"title":"Default Title","offer_id":56578314895741,"sku":"6D3-5D4-244","price":29.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/hobbywing_xrotor_f7_fc_3.jpg?v=1753831751"},{"product_id":"foxeer-f722-mini-v4-fc-icm42688","title":"Foxeer F722 Mini V4 FC ICM42688","description":"\u003ch1\u003e\n Foxeer F722 Mini V4 Flight Controller\n\u003c\/h1\u003e\n\u003cp\u003e\n Who says you need a full-size board to get full-size processing power? This is the\n \u003cstrong\u003e\n  Foxeer F722 Mini V4\n \u003c\/strong\u003e\n , a flight controller that shoehorns a ridiculously powerful F7 processor into a featherlight, 20x20mm package. It's the perfect brain for builders who obsess over every gram but refuse to sacrifice performance. If you're building a lightweight ripper, this is the FC you've been looking for.\n\u003c\/p\u003e\n\u003ch3\u003e\n Why You Want It\n\u003c\/h3\u003e\n\u003cp\u003e\n You want this because your ultralight 5-inch or 3-inch beast deserves a fast brain. The F722 CPU gives you the freedom to run full RPM filtering, presets, and all the latest Betaflight goodies without turning your quad into a stuttering mess. Weighing in at just 4 grams, it delivers pure, concentrated performance. With four UARTs and a rock-solid 5V\/2.5A BEC, you have everything essential for a clean, powerful build, minus the fluff and the weight.\n\u003c\/p\u003e\n\u003ch3\u003e\n Specifications\n\u003c\/h3\u003e\n\u003cul\u003e\n \u003cli\u003e\n  \u003cstrong\u003e\n   CPU:\n  \u003c\/strong\u003e\n  STM32F722 (Full-size processing power in a fun-size package.)\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003cstrong\u003e\n   Gyro:\n  \u003c\/strong\u003e\n  ICM-42688 (A modern, reliable gyro to keep you locked in.)\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003cstrong\u003e\n   Power Input:\n  \u003c\/strong\u003e\n  2-6S LiPo (The sweet spot for almost every freestyle build.)\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003cstrong\u003e\n   BEC Output:\n  \u003c\/strong\u003e\n  DC 5V \/ 2.5A (Plenty of clean juice for your VTX and receiver.)\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003cstrong\u003e\n   Black Box:\n  \u003c\/strong\u003e\n  16MB (For when you need to prove it was a desync, not pilot error.)\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003cstrong\u003e\n   UARTs:\n  \u003c\/strong\u003e\n  4 Sets (Receiver, VTX, GPS... and one left over for that LED strip you've been meaning to add.)\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003cstrong\u003e\n   Mounting Hole:\n  \u003c\/strong\u003e\n  20x20mm (The standard for builds that don't have a weight problem.)\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003cstrong\u003e\n   Weight:\n  \u003c\/strong\u003e\n  4g (You've probably got prop nuts that weigh more than this.)\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003cstrong\u003e\n   USB:\n  \u003c\/strong\u003e\n  Micro-USB (Its one quirky, retro feature. Don't pretend you don't have a cable somewhere.)\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\n What's in the Box*\n\u003c\/h3\u003e\n\u003cul\u003e\n \u003cli\u003e\n  1x Foxeer F722 Mini V4 Flight Controller\n \u003c\/li\u003e\n \u003cli\u003e\n  4x Rubber Columns (To keep your tiny, powerful brain happy and vibe-free.)\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n Disclaimer\n\u003c\/h2\u003e\n\u003cp\u003e\n *The box contains the FC and its little rubber boots. Any magic smoke that appears upon plugging it in is, sadly, supplied by you.\n\u003c\/p\u003e\n\u003ch2\u003e\n Still Here?\n\u003c\/h2\u003e\n\u003cp\u003e\n You're deep in the weeds of a lightweight build, aren't you? Weighing every component, staring at your digital scales. We get it. This is the\n \u003cstrong\u003e\n  lightweight F7 flight controller\n \u003c\/strong\u003e\n that ends your search. It has the power you need without the grams you don't. Stop deliberating and start soldering. Your frame is waiting.\n\u003c\/p\u003e\n","brand":"Foxeer","offers":[{"title":"Default Title","offer_id":56578319155581,"sku":"F-MR1863","price":38.5,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/fOXEER-f722-MIN-FC-4.png?v=1753831777"},{"product_id":"holybro-m9n-2nd-gps-module-for-pixhawk","title":"HolyBro M9N 2nd GPS Module for Pixhawk","description":"\u003cp\u003e\n The M9N GPS has an UBLOX M9N module, IST8310 compass, tri-colored LED indicator, and a safety switch.\n\u003c\/p\u003e\n\u003cp\u003e\n This module ships with a baud rate of 115200 5Hz\n\u003c\/p\u003e\n\u003ch2\u003e\n Features and Specifications\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Ublox Neo-M9N module\n \u003c\/li\u003e\n \u003cli\u003e\n  Industry leading -167 dBm navigation sensitivity\n \u003c\/li\u003e\n \u003cli\u003e\n  Cold starts: 26s\n \u003c\/li\u003e\n \u003cli\u003e\n  LNA MAX2659ELT+\n \u003c\/li\u003e\n \u003cli\u003e\n  25 x 25 x 4 mm ceramic patch antenna\n \u003c\/li\u003e\n \u003cli\u003e\n  Rechargeable Farah capacitance\n \u003c\/li\u003e\n \u003cli\u003e\n  Low noise 3.3V regulator\n \u003c\/li\u003e\n \u003cli\u003e\n  Current consumption: less than 150mA @ 5V\n \u003c\/li\u003e\n \u003cli\u003e\n  Fix indicator LEDs\n \u003c\/li\u003e\n \u003cli\u003e\n  Protective case\n \u003c\/li\u003e\n \u003cli\u003e\n  26cm cable included\n \u003c\/li\u003e\n \u003cli\u003e\n  Diameter 50mm total size, 32 grams with case.\n \u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"HolyBro","offers":[{"title":"Default Title","offer_id":56578323317117,"sku":"B92-2C3-F8C","price":53.35,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/b1174cf999.jpg?v=1753831805"},{"product_id":"pixhawk-mini-carrier-board-without-pixhawk-cube-sl4","title":"CubePilot Cube Mini Carrier Board","description":"\u003cp\u003eThe Cube Mini Carrier Board is a compact and versatile flight controller base board designed for use with the Cube Mini and Cube Orange+ autopilot systems. With its standardised DF17 connector, the Mini Carrier Board can be easily connected to every version of the Cube flight controller, making it an ideal choice for applications that have size limits. Despite its smaller size, the Mini Carrier Board offers almost the same capabilities as the Pixhawk 2.1 standard carrier board and the Cube Orange Carrier Board.\u003c\/p\u003e\n\u003cp\u003eIn addition to its size and compatibility, the Mini Carrier Board also offers a range of useful functionality, including dual power input for redundant power, automatic switchover to another power source if one fails, and power distribution to limit the current at each connector and prevent overloading. It also includes voltage protection to shut down the circuit if the voltage exceeds the limit.\u003c\/p\u003e\n\u003cp\u003ePlease note that the \u003ca href=\"https:\/\/www.unmannedtechshop.co.uk\/product\/pixhawk-cube-mini-imu-no-carrier-board-included\/\"\u003e Cube Mini IMU \u003c\/a\u003e \/ \u003ca href=\"https:\/\/www.unmannedtechshop.co.uk\/product\/pixhawk-cube-orange-module\/\"\u003e Cube Orange \u003c\/a\u003e is not included in this kit. The kit includes only one Mini Carrier Board. If you are in need of a reliable and compact flight controller board for your UAV, the Mini Carrier Board is an excellent choice when paired with one of the Cube autopilot modules.\u003c\/p\u003e\n\u003ch2\u003eFunctionality of Carrier Board:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDual power input (for redundant power, automatic switch to another power when one fails)\u003c\/li\u003e\n\u003cli\u003ePower distribution (limit the current at each connector, avoiding overloading when one device draws too large current)\u003c\/li\u003e\n\u003cli\u003eVoltage protection (over or under voltage protection, the circuit will be shut down if the voltage exceeds the limit)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e Note: Cube Mini IMU is not included\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2 data-content-type=\"heading\" data-appearance=\"default\" data-element=\"main\"\u003eSpecifications\u003c\/h2\u003e\n\u003cdiv data-content-type=\"text\" data-appearance=\"default\" data-element=\"main\"\u003e\n\u003cul\u003e\n\u003cli\u003eInput Voltage (Power Port): 4–5.7V (safe range: 0–20V, but system won't operate outside 4–5.7V)\u003c\/li\u003e\n\u003cli\u003eWorking Temperature: -10°C to 55°C\u003c\/li\u003e\n\u003cli\u003eDimensions: 47.5 x 38.5 x 17.8 mm\u003c\/li\u003e\n\u003cli\u003eInput Current (Power Port): 2.5A\u003c\/li\u003e\n\u003cli\u003eRated Power Output\/Input: 14W\u003c\/li\u003e\n\u003cli\u003eUSB Input Voltage: 4–5.7V\u003c\/li\u003e\n\u003cli\u003eUSB Input Current: 250mA\u003c\/li\u003e\n\u003cli\u003eServo Rail Voltage: 4–10.5V\u003c\/li\u003e\n\u003cli\u003eMaterial: ABS molding\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv data-content-type=\"row\" data-appearance=\"contained\" data-element=\"main\"\u003e\n\u003cdiv data-enable-parallax=\"0\" data-parallax-speed=\"0.5\" data-background-images=\"{}\" data-background-type=\"image\" data-video-loop=\"true\" data-video-play-only-visible=\"true\" data-video-lazy-load=\"true\" data-video-fallback-src=\"\" data-element=\"inner\" data-pb-style=\"AUMDSC4\"\u003e\n\u003ch2 data-content-type=\"heading\" data-appearance=\"default\" data-element=\"main\"\u003eLinks\u003c\/h2\u003e\n\u003cdiv data-content-type=\"text\" data-appearance=\"default\" data-element=\"main\"\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/docs.cubepilot.org\/user-guides\/carrier-boards\/mini-carrier-board\" tabindex=\"0\"\u003eCubepilot Mini Carrier Board User Guide\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv data-content-type=\"row\" data-appearance=\"contained\" data-element=\"main\"\u003e\n\u003cdiv data-enable-parallax=\"0\" data-parallax-speed=\"0.5\" data-background-images=\"{}\" data-background-type=\"image\" data-video-loop=\"true\" data-video-play-only-visible=\"true\" data-video-lazy-load=\"true\" data-video-fallback-src=\"\" data-element=\"inner\" data-pb-style=\"K6JSLOT\"\u003e\n\u003ch2 data-content-type=\"heading\" data-appearance=\"default\" data-element=\"main\"\u003eIncludes\u003c\/h2\u003e\n\u003cdiv data-content-type=\"text\" data-appearance=\"default\" data-element=\"main\"\u003e\n\u003cul\u003e\n\u003cli\u003e1x CubePilot Mini Carrier Board\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/Carrierboard_infographic_1.webp?v=1759325610\" alt=\"\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg width=\"1920\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/CubePilot-Ecosystem-OEM-Carrier-Board-Poster-scaled_e2efc2e0-a7c0-44eb-8503-564a2ff43299.jpg?v=1754235418\" height=\"2560\" class=\"aligncenter size-full wp-image-473201\" alt=\"\"\u003e\u003c\/p\u003e\n\u003ch2\u003eIncluded\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1pc Cube mini carrier board\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CubePilot","offers":[{"title":"Default Title","offer_id":56578324627837,"sku":"HX4-96041","price":70.82,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/CubePilot-Mini-Carrier-Board-4.jpg?v=1753831808"},{"product_id":"holybro-m9n-gps-module-for-pixhawk","title":"HolyBro M9N GPS Module for Pixhawk","description":"\u003cp\u003e\n The M9N GPS has an UBLOX M9N module, IST8310 compass, tri-colored LED indicator, and a safety switch.\n\u003c\/p\u003e\n\u003cp\u003e\n This module ships with a baud rate of 115200 5Hz\n\u003c\/p\u003e\n\u003ch2\u003e\n Features and Specifications\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Ublox Neo-M9N module\n \u003c\/li\u003e\n \u003cli\u003e\n  Industry leading -167 dBm navigation sensitivity\n \u003c\/li\u003e\n \u003cli\u003e\n  Cold starts: 26s\n \u003c\/li\u003e\n \u003cli\u003e\n  LNA MAX2659ELT+\n \u003c\/li\u003e\n \u003cli\u003e\n  25 x 25 x 4 mm ceramic patch antenna\n \u003c\/li\u003e\n \u003cli\u003e\n  Rechargeable Farah capacitance\n \u003c\/li\u003e\n \u003cli\u003e\n  Low noise 3.3V regulator\n \u003c\/li\u003e\n \u003cli\u003e\n  Current consumption: less than 150mA @ 5V\n \u003c\/li\u003e\n \u003cli\u003e\n  Fix indicator LEDs\n \u003c\/li\u003e\n \u003cli\u003e\n  Protective case\n \u003c\/li\u003e\n \u003cli\u003e\n  26cm cable included\n \u003c\/li\u003e\n \u003cli\u003e\n  Diameter 50mm total size, 32 grams with case.\n \u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"HolyBro","offers":[{"title":"Default Title","offer_id":56578324791677,"sku":"C61-EE7-5F1","price":53.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/12029GPS.jpg?v=1753831818"},{"product_id":"aikon-f7-mini-aio-45a-6s-flight-controller","title":"Aikon F7 Mini AIO 45A 6S Flight Controller","description":"\u003cp\u003e\n Looking for a flight controller that will elevate your cinewhoop game to the next level? Look no further than the Aikon F7 Mini 45A All-In-One Flight Controller! This little powerhouse packs a punch with a 216mhz F7 processor, independent FC and ESC PCBs for low noise, and 5 software invertible hardware UARTS.\n\u003c\/p\u003e\n\u003ch2\u003e\n Features\n\u003c\/h2\u003e\n\u003col\u003e\n \u003cli\u003e\n  Onboard OSD and blackbox for real-time performance monitoring\n \u003c\/li\u003e\n \u003cli\u003e\n  Connectors for DJI-HD and RC link for seamless integration with your setup\n \u003c\/li\u003e\n \u003cli\u003e\n  High overhead voltage regulators rated up to 6S, capable of handling voltage spikes\n \u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\n With software controlled VTX power switch (assigned to USER1 mode by default), LED and buzzer outputs, and a 10v 1.5A voltage regulator for your DJI HD system, the Aikon F7 Mini has everything you need for a smooth and seamless flight experience. So why wait? Get your hands on this little guy today and let the good times take flight!\n\u003c\/p\u003e\n\u003ch2\u003e\n Specifications\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  216mhz F7 processor\n \u003c\/li\u003e\n \u003cli\u003e\n  Independent FC and ESC PCBs for low noise\n \u003c\/li\u003e\n \u003cli\u003e\n  5 Software invertible hardware UARTS\n \u003c\/li\u003e\n \u003cli\u003e\n  Onboard OSD and blackbox\n \u003c\/li\u003e\n \u003cli\u003e\n  Software controlled VTX power switch (assigned to USER1 mode by default)\n \u003c\/li\u003e\n \u003cli\u003e\n  Connectors for DJI-HD and RC link\n \u003c\/li\u003e\n \u003cli\u003e\n  LED and buzzer outputs (LED pad doubles as PPM)\n \u003c\/li\u003e\n \u003cli\u003e\n  On-board high overhead voltage regulators rated up to 6S (50v peak to handle voltage spikes)\n \u003c\/li\u003e\n \u003cli\u003e\n  10v 1.5A voltage regulator for DJI HD system\n \u003c\/li\u003e\n \u003cli\u003e\n  3.3mm high current MOSFETs.\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ctable\u003e\n \u003ctbody\u003e\n  \u003ctr\u003e\n   \u003ctd\u003e\n    Battery\n   \u003c\/td\u003e\n   \u003ctd\u003e\n    3-6s\n   \u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n   \u003ctd\u003e\n    Mount Holes\n   \u003c\/td\u003e\n   \u003ctd\u003e\n    25.5*25.5mm\n   \u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n   \u003ctd\u003e\n    Flight Control Firmware\n   \u003c\/td\u003e\n   \u003ctd\u003e\n    Betaflight AIKONF7 Target\n   \u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n   \u003ctd\u003e\n    MCU\n   \u003c\/td\u003e\n   \u003ctd\u003e\n    STM32F722\n   \u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n   \u003ctd\u003e\n    IMU\n   \u003c\/td\u003e\n   \u003ctd\u003e\n    BMI270 (interrupt pin connected) or MPU6000\n   \u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n   \u003ctd\u003e\n    Barometer\n   \u003c\/td\u003e\n   \u003ctd\u003e\n    DSP310\n   \u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n   \u003ctd\u003e\n    Blackbox\n   \u003c\/td\u003e\n   \u003ctd\u003e\n    SPI 16MB\n   \u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n   \u003ctd\u003e\n    ESC Firmware\n   \u003c\/td\u003e\n   \u003ctd\u003e\n    BLHeli_32\n   \u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n   \u003ctd\u003e\n    Constant Current\n   \u003c\/td\u003e\n   \u003ctd\u003e\n    45A\n   \u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n   \u003ctd\u003e\n    Burst Current\n   \u003c\/td\u003e\n   \u003ctd\u003e\n    55A\n   \u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n   \u003ctd\u003e\n    Current Sensor Scale\n   \u003c\/td\u003e\n   \u003ctd\u003e\n    200\n   \u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n   \u003ctd\u003e\n    Weight\n   \u003c\/td\u003e\n   \u003ctd\u003e\n    14.5g\n   \u003c\/td\u003e\n  \u003c\/tr\u003e\n \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003e\n Aikon F7 Mini AIO Pinout Diagram\n\u003c\/h2\u003e\n\u003cp\u003e\n \u003cimg alt=\"\" class=\"alignnone size-full wp-image-653812\" height=\"511\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/aikon-aio-45a-mini-manual.jpg?v=1754231303\" width=\"1049\"\u003e\n\u003c\/p\u003e\n","brand":"Aikon","offers":[{"title":"BMI270","offer_id":56578330100093,"sku":"AKAIO32MM356SB","price":84.95,"currency_code":"GBP","in_stock":true},{"title":"MPU6000","offer_id":56578330132861,"sku":"AKAIO32MM356SM","price":99.95,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/aikon-f7-mini-front.jpg?v=1753831836"},{"product_id":"profiled-developer-version-2m-reel","title":"ProfiLED (developer version) 2m reel","description":"\u003cp\u003e\n This is a 2m reel of the new ProfiLED.  These are still a developer only feature at the moment.  These are individually addressable RGB LED modules that let you program them to perform various functions.  Once officially released, the profiLED system will let you customise the LED behaviour of your drone based on flight functions and other events.  They can show you your current flight mode, altitude or even set them to turn to white bright when landing to help any downward looking cameras see the ground better.\n\u003c\/p\u003e\n\u003cp\u003e\n These are sold in 2m reels.  Although we offer a full warranty for the LED modules themself against defects, we cannot offer much in terms of dedicated support as the firmware is still in development.\n\u003c\/p\u003e\n\u003cp\u003e\n \u003cimg alt=\"1-1.png\" class=\"__mce_add_custom__\" height=\"581\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/1-1_7ebdcef4-c9b9-48ff-b772-a22d2b744ec6.png?v=1754235430\" title=\"1-1.png\" width=\"564\"\u003e\n\u003c\/p\u003e\n","brand":"CubePilot","offers":[{"title":"Default Title","offer_id":56578333737341,"sku":"HX4-06046","price":14.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/ProfiLED.jpg?v=1753831850"},{"product_id":"sub250-redfox-a2-12a-aio-fc-for-nanofly20-2s","title":"Sub250 Redfox A2 12A AIO FC for Nanofly20 2S","description":"\u003ch1\u003e\n Redfox A2 12A AIO: The 4.1g Miracle\n\u003c\/h1\u003e\n\u003cp\u003e\n Let's be honest, your last \"ultralight\" build probably weighed more than your lunch. Enter the\n \u003cstrong\u003e\n  Redfox A2 12A FC\n \u003c\/strong\u003e\n , a featherlight AIO board designed by the wizards at Sub250. At a ridiculous 4.1g, including the wires, this thing is so light you'll question if we actually put anything in the box. It crams an FC, a 12A ESC, and an actual, non-SPI ELRS 2.4G receiver into one tidy package, making it the perfect brain for any\n \u003cstrong\u003e\n  sub 250g FPV drone\n \u003c\/strong\u003e\n that needs to stay on the right side of the CAA paperwork tsunami.\n\u003c\/p\u003e\n\u003ch3\u003e\n Why You Want It\n\u003c\/h3\u003e\n\u003cp\u003e\n You're chasing the dream: a 1S or 2S toothpick that flies for more than 90 seconds and doesn't handle like a shopping trolley with a wonky wheel. This is it. By integrating the ExpressLRS receiver directly, the Redfox A2 saves you weight, soldering time, and the special kind of existential dread that comes from realising you forgot to order an antenna. It's the simplest way to get a powerful, responsive core into your micro-build without needing the dexterity of a brain surgeon or the patience of a saint. We're just here to sell you happiness, one gram at a time. For a modest fee, of course.\n\u003c\/p\u003e\n\u003ch3\u003e\n Specifications\n\u003c\/h3\u003e\n\u003cul\u003e\n \u003cli\u003e\n  \u003cstrong\u003e\n   MCU:\n  \u003c\/strong\u003e\n  STM32F411 (The little engine that absolutely could)\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003cstrong\u003e\n   IMU:\n  \u003c\/strong\u003e\n  BMI270 (Because knowing which way is up is generally useful)\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003cstrong\u003e\n   OSD:\n  \u003c\/strong\u003e\n  BetaFlight OSD w\/ AT7456E (So you can see your battery sag in glorious detail)\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003cstrong\u003e\n   ESC:\n  \u003c\/strong\u003e\n  Redfox 12A (Enough grunt for your 1S or 2S shenanigans)\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003cstrong\u003e\n   Receiver:\n  \u003c\/strong\u003e\n  ExpressLRS 2.4G (UART, (not SPI) Built-in, so you have one less thing to mess up)\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003cstrong\u003e\n   Mounting:\n  \u003c\/strong\u003e\n  25.5×25.5mm (The whoop standard, you know the drill)\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003cstrong\u003e\n   Weight:\n  \u003c\/strong\u003e\n  4.1g (Lighter than your existential crisis about that last crash)\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003cstrong\u003e\n   Power:\n  \u003c\/strong\u003e\n  1-2S LiPo (Don't you dare try a 3S)\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\n What's in the Box*\n\u003c\/h3\u003e\n\u003cul\u003e\n \u003cli\u003e\n  1x Redfox A2 12A AIO Flight Controller\n \u003c\/li\u003e\n \u003cli\u003e\n  4x M2 Rubber Grommets (To dampen the bad vibes)\n \u003c\/li\u003e\n \u003cli\u003e\n  1x XT30 Power Cable\n \u003c\/li\u003e\n \u003cli\u003e\n  1x 2.4G Receiver Antenna\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n A Word From Our Lawyers\n\u003c\/h2\u003e\n\u003cp\u003e\n We pack what the factory gives us, so if a grommet is missing, blame their robots, not ours. The board's the important bit, and that's guaranteed.\n\u003c\/p\u003e\n\u003ch2\u003e\n Still Here?\n\u003c\/h2\u003e\n\u003cp\u003e\n Wow, you're a dedicated reader. Or a competitor. Either way, we respect the commitment. You've scrolled this far, so you've basically burned the calories this AIO would save you. If you're looking for the ultimate\n \u003cstrong\u003e\n  lightweight 2S whoop flight controller\n \u003c\/strong\u003e\n , this is your endgame. Now, go on, add it to your basket. Your other components are getting lonely.\n\u003c\/p\u003e\n","brand":"Sub250","offers":[{"title":"Default Title","offer_id":56578333868413,"sku":"SU000092","price":49.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/Redfox-A2-AIO-FC-2.webp?v=1753831850"},{"product_id":"geprc-taker-f722-bls-65a-v2-stack","title":"GEPRC TAKER F722 BLS 65A V2 Stack","description":"\u003ch3\u003e\n GEPRC TAKER F722 BLS 65A V2 Stack: High-Performance Control, Built for Precision\n\u003c\/h3\u003e\n\u003cp\u003e\n \u003cstrong\u003e\n  Looking for the ultimate FPV stack that combines power, precision, and reliability?\n \u003c\/strong\u003e\n The GEPRC TAKER F722 BLS 65A V2 Stack is a feature-packed flight controller and ESC combo engineered for smooth, stable flights. With its STM32F722 processor and 42688-P gyro, this stack ensures rapid processing and superior stability. Paired with the TAKER H65 8S 4-in-1 ESC, it's ready to handle demanding setups, supporting up to 8S LiPo batteries for incredible power delivery.\n\u003c\/p\u003e\n\u003cp\u003e\n From onboard 16M black box storage to an integrated LC filter, this stack is the complete package. The upgraded Type-C USB interface makes configuration a breeze, and direct compatibility with the DJI Air Unit means less hassle and more airtime. Whether you're a pro pilot or fine-tuning your setup, the TAKER stack delivers unmatched performance.\n\u003c\/p\u003e\n\u003ch3\u003e\n \u003cimg src=\"https:\/\/geprc.com\/wp-content\/uploads\/2024\/08\/1-7.jpg\"\u003e\n \u003cimg src=\"https:\/\/geprc.com\/wp-content\/uploads\/2024\/08\/2-9.jpg\"\u003e\n\u003c\/h3\u003e\n\u003ch3\u003e\n \u003cstrong\u003e\n  Key Features of the GEPRC TAKER F722 BLS 65A V2 Stack\n \u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003ch4\u003e\n \u003cstrong\u003e\n  Flight Controller (GEP-F722-HD v2)\n \u003c\/strong\u003e\n\u003c\/h4\u003e\n\u003cul\u003e\n \u003cli\u003e\n  \u003cstrong\u003e\n   Processor:\n  \u003c\/strong\u003e\n  STM32F722 for fast, reliable operation\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003cstrong\u003e\n   Gyroscope:\n  \u003c\/strong\u003e\n  Latest 42688-P for smooth control\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003cstrong\u003e\n   Onboard Black Box:\n  \u003c\/strong\u003e\n  16M storage for data tracking\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003cstrong\u003e\n   Compatibility:\n  \u003c\/strong\u003e\n  Direct plug-in for DJI Air Unit\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003cstrong\u003e\n   Power Options:\n  \u003c\/strong\u003e\n  Dual BECs (\n  \u003ca rel=\"noopener\"\u003e\n   9V@2.5A\n  \u003c\/a\u003e\n  , 5V@3A)\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003cstrong\u003e\n   OSD:\n  \u003c\/strong\u003e\n  BetaFlight OSD with AT7456E chip\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003cstrong\u003e\n   Connections:\n  \u003c\/strong\u003e\n  5 UARTs for peripherals\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003cstrong\u003e\n   Design:\n  \u003c\/strong\u003e\n  Compact 36.85mm x 36.85mm with 30.5x30.5mm mounting holes\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\n \u003cstrong\u003e\n  ESC (TAKER H65_8S_BLS 65A 4-in-1)\n \u003c\/strong\u003e\n\u003c\/h4\u003e\n\u003cul\u003e\n \u003cli\u003e\n  \u003cstrong\u003e\n   Input Voltage:\n  \u003c\/strong\u003e\n  Supports 3-8S LiPo batteries\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003cstrong\u003e\n   Current Capacity:\n  \u003c\/strong\u003e\n  65A continuous, 70A burst (5 seconds)\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003cstrong\u003e\n   Protocol:\n  \u003c\/strong\u003e\n  Dshot 150\/300\/600 support\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003cstrong\u003e\n   Build:\n  \u003c\/strong\u003e\n  Durable 42mm x 45.7mm, 14.9g lightweight design\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003cstrong\u003e\n   Integrated Filter:\n  \u003c\/strong\u003e\n  Smooth power delivery\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\n \u003cstrong\u003e\n  What's in the Box\n \u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003cul\u003e\n \u003cli\u003e\n  1x Flight Controller (GEP-F722-HD v2)\n \u003c\/li\u003e\n \u003cli\u003e\n  1x ESC board (TAKER H65_8S_BLS 65A 4-in-1)\n \u003c\/li\u003e\n \u003cli\u003e\n  1x Capacitor\n \u003c\/li\u003e\n \u003cli\u003e\n  1x DJI Air Unit adapter cable\n \u003c\/li\u003e\n \u003cli\u003e\n  1x Flight controller adapter cable\n \u003c\/li\u003e\n \u003cli\u003e\n  1x XT60 power cable\n \u003c\/li\u003e\n \u003cli\u003e\n  4x M3x30 screws\n \u003c\/li\u003e\n \u003cli\u003e\n  4x M3x25 screws\n \u003c\/li\u003e\n \u003cli\u003e\n  8x Nylon nuts\n \u003c\/li\u003e\n \u003cli\u003e\n  8x Silicone anti-shake pads\n \u003c\/li\u003e\n \u003cli\u003e\n  2x sh1.0 4pin silicone cable\n \u003c\/li\u003e\n \u003cli\u003e\n  1x Camera connection cable\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n \u003cem\u003e\n  Disclaimer: Included accessories may vary based on supply.\n \u003c\/em\u003e\n\u003c\/p\u003e\n","brand":"GEPRC","offers":[{"title":"Default Title","offer_id":56578339766653,"sku":"GP107211","price":64.95,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/GEPRC-TAKER-F722-BLS-65A-V2-STACK-4.jpg?v=1753831872"},{"product_id":"pixhawk-6c-autopilot-kit","title":"Pixhawk 6C Autopilot Kit","description":"\u003cp\u003e\n Introducing the Pixhawk® 6C, the latest addition to the highly successful family of Pixhawk® flight controllers. This cutting-edge technology is based on the Pixhawk® FMUv6C Open Standard and Connector Standard, and comes with the PX4 Autopilot® pre-installed, making it the perfect solution for controlling any autonomous vehicle, be it for academic or commercial applications.\n\u003c\/p\u003e\n\u003cp\u003e\n The Pixhawk® 6C boasts a high-performance H7 microcontroller, manufactured by STMicroelectronics® and paired with sensor technology from Bosch® \u0026amp; InvenSense®. The Arm® Cortex®-M7 core runs at a clock speed of up to 480 MHz, with 2MB flash memory and 1MB RAM. This updated processing power makes the Pixhawk® 6C a developers' dream, allowing for even more complex algorithms and models.\n\u003c\/p\u003e\n\u003cp\u003e\n The FMUv6C open standard includes high-performance, low-noise IMUs on board, designed with cost-effectiveness in mind. The IMUs are temperature-controlled by onboard heating resistors, ensuring the optimum working temperature for accurate readings. The Pixhawk® 6C also features a newly designed integrated vibration isolation system, filtering out high-frequency vibrations and reducing noise to ensure the most accurate readings possible.\n\u003c\/p\u003e\n\u003cp\u003e\n The low-profile form factor of the Pixhawk® 6C makes it perfect for use in a variety of applications, while the redundant IMUs from Bosch® \u0026amp; InvenSense® provide peace of mind, ensuring reliable performance at all times. This flight controller is the perfect choice for developers at corporate research labs, startups, academics (research, professors, students), and commercial applications.\n\u003c\/p\u003e\n\u003cp\u003e\n We offer the Pixhawk® 6C in two different case options. The lower-cost plastic case option is a great choice for those looking for a cost-effective solution. For those looking for a more premium experience, we also offer a case with a sleek aluminum CNC finish.  Please contact us for more information about the CNC case, MOQ applies. Choose the option that best fits your needs and start experiencing the power and performance of the Pixhawk® 6C today!\n\u003c\/p\u003e\n\u003cp\u003e\n \u003cimg alt=\"\" class=\"alignnone size-full wp-image-699540\" height=\"2048\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/Pixhawk6CSampleWiringDiagram_2048x2048_e37b6e59-c932-4ce1-8312-a85635790e4a.jpg?v=1754235401\" width=\"1496\"\u003e\n\u003c\/p\u003e\n\u003ch2\u003e\n Features\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  High performance H7 Processor with clock speed up to 480 MHz\n \u003c\/li\u003e\n \u003cli\u003e\n  New cost-effective design with low-profile form factor\n \u003c\/li\u003e\n \u003cli\u003e\n  Redundant inertial measurement unit (IMU) from Bosch® \u0026amp; InvenSense®\n \u003c\/li\u003e\n \u003cli\u003e\n  Newly designed integrated vibration isolation system to filter out high frequency vibration and reduce noise to ensure accurate readings\n \u003c\/li\u003e\n \u003cli\u003e\n  IMUs are temperature-controlled by onboard heating resistors, allowing optimum working temperature of IMUs\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n Specifications\n\u003c\/h2\u003e\n\u003cp\u003e\n Processors \u0026amp; Sensors\n\u003c\/p\u003e\n\u003cul\u003e\n \u003cli\u003e\n  FMU Processor: STM32H743\n  \u003cul\u003e\n   \u003cli\u003e\n    32 Bit Arm® Cortex®-M7, 480MHz, 2MB memory, 1MB SRAM\n   \u003c\/li\u003e\n  \u003c\/ul\u003e\n \u003c\/li\u003e\n \u003cli\u003e\n  IO Processor: STM32F103\n  \u003cul\u003e\n   \u003cli\u003e\n    32 Bit Arm® Cortex®-M3, 72MHz, 64KB SRAM\n   \u003c\/li\u003e\n  \u003c\/ul\u003e\n \u003c\/li\u003e\n \u003cli\u003e\n  On-board sensors\n  \u003cul\u003e\n   \u003cli\u003e\n    Accel\/Gyro: ICM-42688-P\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Accel\/Gyro: BMI055\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Mag: IST8310\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Barometer: MS5611\n   \u003c\/li\u003e\n  \u003c\/ul\u003e\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n Electrical data\n\u003c\/p\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Voltage Ratings:\n  \u003cul\u003e\n   \u003cli\u003e\n    Max input voltage: 6V\n   \u003c\/li\u003e\n   \u003cli\u003e\n    USB Power Input: 4.75~5.25V\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Servo Rail Input: 0~36V\n   \u003c\/li\u003e\n  \u003c\/ul\u003e\n \u003c\/li\u003e\n \u003cli\u003e\n  Current Ratings:\n  \u003cul\u003e\n   \u003cli\u003e\n    Telem1 Max output current limiter: 1.5A\n   \u003c\/li\u003e\n   \u003cli\u003e\n    All other port combined output current limiter: 1.5A\n   \u003c\/li\u003e\n  \u003c\/ul\u003e\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n Mechanical data\n\u003c\/p\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Dimensions: 84.8 * 44 * 12.4 mm\n \u003c\/li\u003e\n \u003cli\u003e\n  Weight (Aluminum Case) : 59.3g\n \u003c\/li\u003e\n \u003cli\u003e\n  Weight (Plastic Case) : 34.6g\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n Interfaces\n\u003c\/p\u003e\n\u003cul\u003e\n \u003cli\u003e\n  16- PWM servo outputs (8 from IO, 8 from FMU)\n \u003c\/li\u003e\n \u003cli\u003e\n  3 general purpose serial ports\n  \u003cul\u003e\n   \u003cli\u003e\n    Telem1 - Full flow control, separate 1.5A current limit\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Telem2 - Full flow control\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Telem3\n   \u003c\/li\u003e\n  \u003c\/ul\u003e\n \u003c\/li\u003e\n \u003cli\u003e\n  2 GPS ports\n  \u003cul\u003e\n   \u003cli\u003e\n    GPS1 - Full GPS port (GPS plus safety switch)\n   \u003c\/li\u003e\n   \u003cli\u003e\n    GPS2 - Basic GPS port\n   \u003c\/li\u003e\n  \u003c\/ul\u003e\n \u003c\/li\u003e\n \u003cli\u003e\n  1 I2C port\n  \u003cul\u003e\n   \u003cli\u003e\n    Supports dedicated I2C calibration EEPROM located on sensor module\n   \u003c\/li\u003e\n  \u003c\/ul\u003e\n \u003c\/li\u003e\n \u003cli\u003e\n  2 CAN Buses\n \u003c\/li\u003e\n \u003cli\u003e\n  2 Debug port\n  \u003cul\u003e\n   \u003cli\u003e\n    FMU Debug\n   \u003c\/li\u003e\n   \u003cli\u003e\n    I\/O Debug\n   \u003c\/li\u003e\n  \u003c\/ul\u003e\n \u003c\/li\u003e\n \u003cli\u003e\n  Dedicated R\/C input for Spektrum \/ DSM and S.BUS, CPPM, analog \/ PWM RSSI\n \u003c\/li\u003e\n \u003cli\u003e\n  Dedicated S.BUS output\n \u003c\/li\u003e\n \u003cli\u003e\n  2 Power input ports (Analog)\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n Other Characteristics\n\u003c\/p\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Operating temperature: -40 ~ 85°c\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n Included\n\u003c\/h2\u003e\n\u003cp\u003e\n Standard Set\n\u003c\/p\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Pixhawk 6C Flight Controller Module\n \u003c\/li\u003e\n \u003cli\u003e\n  PM03 or PM07 Power Module\n \u003c\/li\u003e\n \u003cli\u003e\n  Cable Set\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n Standard Set + M10 GPS\n\u003c\/p\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Pixhawk 6C Flight Controller Module\n \u003c\/li\u003e\n \u003cli\u003e\n  PM03 or PM07 Power Module\n \u003c\/li\u003e\n \u003cli\u003e\n  Cable Set\n \u003c\/li\u003e\n \u003cli\u003e\n  M10 GPS\/Compass Module\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n Resources\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  \u003ca href=\"https:\/\/docs.holybro.com\/autopilot\/pixhawk-6c\" rel=\"nofollow noopener\" target=\"_blank\"\u003e\n   Pixhawk 6C Wiki\/Documentation\n  \u003c\/a\u003e\n \u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"HolyBro","offers":[{"title":"w\/ PM07 + M10 GPS","offer_id":56578341634429,"sku":"H20254","price":209.9,"currency_code":"GBP","in_stock":false},{"title":"w\/ PM02V3","offer_id":56578341667197,"sku":"H20183","price":154.9,"currency_code":"GBP","in_stock":false},{"title":"w\/ PM07","offer_id":56578341699965,"sku":"H20185","price":174.9,"currency_code":"GBP","in_stock":false},{"title":"w\/ PM02V3 + M10 GPS","offer_id":56578341732733,"sku":"H20232","price":189.9,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/f4c2685e29.webp?v=1753831881"},{"product_id":"pixhawk-6c-cable-set","title":"Pixhawk 6C cable set","description":"\u003cp\u003e\n The Pixhawk 6C Autopilot Cable Set is the perfect solution for your drone setup. This set includes high-quality cables, specifically designed for use with the Pixhawk 6C flight controller. The cables are made from durable materials to ensure long-lasting performance, even in demanding flying conditions. The connectors coated for improved signal transfer and to reduce interference.  With the Pixhawk 6C Autopilot Cable Set, you can rest assured that your drone's connection will be reliable and stable, allowing for a smooth and worry-free flying experience\n\u003c\/p\u003e\n\u003ch2\u003e\n Included\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  1x Cable Set for Pixhawk 6C\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n Pixhawk 6C Cable Kit Contents\n\u003c\/h2\u003e\n\u003cp\u003e\n \u003cimg alt=\"\" class=\"alignnone size-full wp-image-653882\" height=\"2560\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/75dd47f9f5-scaled_9e6cab74-077c-4a7d-938e-c9b1b0c5ba46.webp?v=1754235404\" width=\"1810\"\u003e\n\u003c\/p\u003e\n\u003cp\u003e\n\u003c\/p\u003e\n","brand":"HolyBro","offers":[{"title":"Default Title","offer_id":56578343502205,"sku":"H18079","price":26.68,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/2496ddcfa2.webp?v=1753831909"},{"product_id":"emax-nanoscout-aio-flight-controller-elrs-6a-vtx","title":"Emax Nanoscout AIO Flight Controller ELRS, 6A, VTX","description":"\u003ch2 data-end=\"360\" data-start=\"268\"\u003e\n \u003cstrong data-end=\"358\" data-start=\"271\"\u003e\n  Emax Tinyhawk Nanoscout Spare Parts Pack C - All-in-One AIO FC, ESC \u0026amp; ELRS Receiver\n \u003c\/strong\u003e\n\u003c\/h2\u003e\n\u003cp data-end=\"894\" data-start=\"362\"\u003e\n When your\n \u003cstrong data-end=\"394\" data-start=\"372\"\u003e\n  Tinyhawk Nanoscout\n \u003c\/strong\u003e\n needs a brain transplant, this\n \u003cstrong data-end=\"530\" data-start=\"426\"\u003e\n  All-in-One Flight Controller (FC), Electronic Speed Controller (ESC), and ExpressLRS (ELRS) Receiver\n \u003c\/strong\u003e\n has everything you need to get back in the air. Engineered for seamless integration, this AIO board is the beating heart of your micro drone, ensuring smooth, stable flight control with high-speed response. Whether you're replacing a damaged board or upgrading your setup, this pack delivers reliability, precision, and ultra-low latency for serious FPV action.\n\u003c\/p\u003e\n\u003ch3 data-end=\"943\" data-start=\"896\"\u003e\n \u003cstrong data-end=\"941\" data-start=\"900\"\u003e\n  Why Upgrade to the Emax AIO FC \u0026amp; ESC?\n \u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003cul data-end=\"1607\" data-start=\"944\"\u003e\n \u003cli data-end=\"1052\" data-start=\"944\"\u003e\n  \u003cstrong data-end=\"972\" data-start=\"946\"\u003e\n   All-in-One (AIO) Board\n  \u003c\/strong\u003e\n  - Combines the flight controller, ESC, and ELRS receiver in one compact unit.\n \u003c\/li\u003e\n \u003cli data-end=\"1161\" data-start=\"1053\"\u003e\n  \u003cstrong data-end=\"1085\" data-start=\"1055\"\u003e\n   ExpressLRS (ELRS) Receiver\n  \u003c\/strong\u003e\n  - Ultra-low latency, long-range performance, and rock-solid connectivity.\n \u003c\/li\u003e\n \u003cli data-end=\"1268\" data-start=\"1162\"\u003e\n  \u003cstrong data-end=\"1204\" data-start=\"1164\"\u003e\n   Optimized for the Tinyhawk Nanoscout\n  \u003c\/strong\u003e\n  - Drop-in replacement, no messy rewiring or guesswork needed.\n \u003c\/li\u003e\n \u003cli data-end=\"1379\" data-start=\"1269\"\u003e\n  \u003cstrong data-end=\"1299\" data-start=\"1271\"\u003e\n   Reliable ESC Performance\n  \u003c\/strong\u003e\n  - Efficient power delivery for smooth throttle response and flight stability.\n \u003c\/li\u003e\n \u003cli data-end=\"1485\" data-start=\"1380\"\u003e\n  \u003cstrong data-end=\"1414\" data-start=\"1382\"\u003e\n   Lightweight \u0026amp; Durable Design\n  \u003c\/strong\u003e\n  - Keeps your micro drone nimble while ensuring long-term durability.\n \u003c\/li\u003e\n \u003cli data-end=\"1607\" data-start=\"1486\"\u003e\n  \u003cstrong data-end=\"1520\" data-start=\"1488\"\u003e\n   Ideal for Repairs \u0026amp; Upgrades\n  \u003c\/strong\u003e\n  - Whether you're fixing a dead board or upgrading to ELRS, this kit has you covered.\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-end=\"1633\" data-start=\"1609\"\u003e\n \u003cstrong data-end=\"1631\" data-start=\"1613\"\u003e\n  Specifications\n \u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003cul data-end=\"2034\" data-start=\"1634\"\u003e\n \u003cli data-end=\"1680\" data-start=\"1634\"\u003e\n  \u003cstrong data-end=\"1654\" data-start=\"1636\"\u003e\n   Compatibility:\n  \u003c\/strong\u003e\n  Emax Tinyhawk Nanoscout\n \u003c\/li\u003e\n \u003cli data-end=\"1745\" data-start=\"1681\"\u003e\n  \u003cstrong data-end=\"1692\" data-start=\"1683\"\u003e\n   Type:\n  \u003c\/strong\u003e\n  All-in-One Flight Controller + ESC + ELRS Receiver\n \u003c\/li\u003e\n \u003cli data-end=\"1839\" data-start=\"1746\"\u003e\n  \u003cstrong data-end=\"1770\" data-start=\"1748\"\u003e\n   Receiver Protocol:\n  \u003c\/strong\u003e\n  ExpressLRS (ELRS) for enhanced signal strength \u0026amp; ultra-low latency\n \u003c\/li\u003e\n \u003cli data-end=\"1902\" data-start=\"1840\"\u003e\n  \u003cstrong data-end=\"1850\" data-start=\"1842\"\u003e\n   ESC:\n  \u003c\/strong\u003e\n  Integrated, optimized for micro drone performance\n \u003c\/li\u003e\n \u003cli data-end=\"1968\" data-start=\"1903\"\u003e\n  \u003cstrong data-end=\"1916\" data-start=\"1905\"\u003e\n   Weight:\n  \u003c\/strong\u003e\n  Ultra-light for minimal impact on flight dynamics\n \u003c\/li\u003e\n \u003cli data-end=\"2034\" data-start=\"1969\"\u003e\n  \u003cstrong data-end=\"1988\" data-start=\"1971\"\u003e\n   Connectivity:\n  \u003c\/strong\u003e\n  Plug-and-play setup with Tinyhawk Nanoscout\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-end=\"2064\" data-start=\"2036\"\u003e\n \u003cstrong data-end=\"2062\" data-start=\"2040\"\u003e\n  What's in the Box?\n \u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003cul data-end=\"2167\" data-start=\"2065\"\u003e\n \u003cli data-end=\"2131\" data-start=\"2065\"\u003e\n  \u003cstrong data-end=\"2129\" data-start=\"2067\"\u003e\n   1x All-in-One (AIO) Flight Controller, ESC \u0026amp; ELRS Receiver\n  \u003c\/strong\u003e\n \u003c\/li\u003e\n \u003cli data-end=\"2167\" data-start=\"2132\"\u003e\n  \u003cstrong data-end=\"2165\" data-start=\"2134\"\u003e\n   1x Set of Mounting Hardware\n  \u003c\/strong\u003e\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-end=\"2248\" data-start=\"2169\"\u003e\n \u003cem data-end=\"2246\" data-start=\"2169\"\u003e\n  Disclaimer: Accessories included may vary depending on supply availability.\n \u003c\/em\u003e\n\u003c\/p\u003e\n","brand":"Emax","offers":[{"title":"Default Title","offer_id":56578352873853,"sku":"E0110003173","price":54.59,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/Emax-Nanoscout-AIO-Flight-Controller-ELRS-6A-VTX-1.webp?v=1753831940"},{"product_id":"happymodel-crazyf405hd-elrs-aio-12a-flight-controller","title":"Happymodel CrazyF405HD ELRS AIO 12A Flight Controller","description":"\u003cp\u003e\n \u003cstrong\u003e\n  Introducing the Turbo-Boosted, Astro-Geared, Drone Driver\n \u003c\/strong\u003e\n\u003c\/p\u003e\n\u003cp\u003e\n Prepare for launch! Strap in for a joyride with the Happymodel CrazyF405HD ELRS 1-2S AIO FC - the cutting-edge flight controller that's turning heads in the drone world! But be warned, this isn't your grandma's flight controller. Built with a taste for adrenaline and an eye for precision, this aerial ace is for the tech-heads, the sky gazers, and the flight fanatics.\n\u003c\/p\u003e\n\u003cp\u003e\n Crafted with intricate care and surgical precision, this flight controller is loaded with a Serial ELRS receiver, 4-IN-1 Blheli_S 12A ESC, and a whole suite of other features that make your average flight controller look like a paper airplane. It's designed for Digital HD FPV, making it an excellent copilot for your Tinywhoop, Cinewhoop, Toothpick or any other small FPV drone. It makes flights smoother than a buttered pancake on a non-stick pan.\n\u003c\/p\u003e\n\u003cp\u003e\n Fed up with outdated analog OSD chips? The CrazyF405HD has tossed those aside like yesterday's newspaper. Its optimised PCB layout and support for 1-2S Lipo\/LiHV lithium batteries offer a quantum leap in performance. Plus, with Betaflight\/INAV firmware, BMP280 barometer, 8MB blackbox, and 3 full sets of UARTs, you're guaranteed a state-of-the-art flying experience.\n \u003cstrong\u003e\n  Please note, we do not offer software level support for BetaFlight\/Inav\n \u003c\/strong\u003e\n\u003c\/p\u003e\n\u003cp\u003e\n To sum it up, the Happymodel CrazyF405HD is lighter than a feather, faster than a cheetah, and packed with more features than a Swiss army knife. It's designed to soar above and beyond ordinary controllers and take your flying experience to stratospheric heights.\n\u003c\/p\u003e\n\u003cp\u003e\n \u003cimg alt=\"\" class=\"alignnone size-full wp-image-674348\" height=\"526\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/Happymodel-CrazyF405-HD-4.jpg?v=1754233904\" width=\"1000\"\u003e\n\u003c\/p\u003e\n\u003ch2\u003e\n Key Features:\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Brand: Happymodel\n \u003c\/li\u003e\n \u003cli\u003e\n  Built-in Serial ExpressLRS 2.4G\n \u003c\/li\u003e\n \u003cli\u003e\n  4-in-1 Blheli_S 12A ESC\n \u003c\/li\u003e\n \u003cli\u003e\n  Compatible with Betaflight\/INAV firmware\n \u003c\/li\u003e\n \u003cli\u003e\n  Integrated BMP280 barometer and 8Mbp blackbox\n \u003c\/li\u003e\n \u003cli\u003e\n  Power supply: 1-2S LiPo\/LiPo HV\n \u003c\/li\u003e\n \u003cli\u003e\n  Firmware target: BetaflightF4\n \u003c\/li\u003e\n \u003cli\u003e\n  Optimised PCB layout\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n \u003cimg alt=\"\" class=\"alignnone size-full wp-image-664951\" height=\"649\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/Happymodel-CrazyF405-AIO-ELRS-FC-2.jpg?v=1754233906\" width=\"1000\"\u003e\n\u003c\/p\u003e\n\u003ch2\u003e\n Specifications:\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Model: CrazyF405HD ELRS 1-2S AIO Flight controller\n \u003c\/li\u003e\n \u003cli\u003e\n  Mount size: 25.5mmx25.5mm\n \u003c\/li\u003e\n \u003cli\u003e\n  Weight: 4.8g (excluding power lead wire)\n \u003c\/li\u003e\n \u003cli\u003e\n  Supports 1-2s Lipo\/LiHV battery\n \u003c\/li\u003e\n \u003cli\u003e\n  Firmware target: BetaflightF4\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ctable width=\"750\"\u003e\n \u003ctbody\u003e\n  \u003ctr\u003e\n   \u003ctd width=\"164\"\u003e\n    \u003cstrong\u003e\n     Flight controller\n    \u003c\/strong\u003e\n   \u003c\/td\u003e\n   \u003ctd width=\"586\"\u003e\n    MCU: STM32F405RGT6 (168MHZ, 1Mbyte FLASH)\n    \u003cbr\u003e\n    GYRO Sensor: BMI270  (SPI connection)\n    \u003cbr\u003e\n    Mount hole size: 25.5mm*25.5mm\n    \u003cbr\u003e\n    Power supply: 1-2S battery input (DC 2.9V-8.7V)\n    \u003cbr\u003e\n    Built-in 12A(each) Blheli_S 4in1 ESC\n    \u003cbr\u003e\n    Built-in Serial ExpressLRS 2.4GBuilt-in BMP280 Barometer\n    \u003cbr\u003e\n    Built-in 8MBp blackbox\n    \u003cbr\u003e\n    Built-in voltage meter sensor , voltage meter scale 110Built-in current meter sensor , current meter scale 470\n   \u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n   \u003ctd width=\"164\"\u003e\n    \u003cstrong\u003e\n     Onboard 4in1 ESC\n    \u003c\/strong\u003e\n   \u003c\/td\u003e\n   \u003ctd width=\"586\"\u003e\n    Power supply: 1-2S LiPo\/LiPo HV\n    \u003cbr\u003e\n    Current: 12A continuous peak 15A (3 seconds)\n    \u003cbr\u003e\n    Support BLHeli_S Bluejay firmware\n    \u003cbr\u003e\n    Factory firmware: Bluejay ESC V0.19Firmware target: Z-H-30\n    \u003cbr\u003e\n    Default protocol: DSHOT300\n    \u003cbr\u003e\n    When use 1s battery and high KV 0702\/0802 motors, should set startup power to 1100\/1200\n   \u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n   \u003ctd width=\"164\"\u003e\n    \u003cstrong\u003e\n     Onboard UART ExpressLRS 2.4GHz Receiver\n    \u003c\/strong\u003e\n   \u003c\/td\u003e\n   \u003ctd width=\"586\"\u003e\n    Packet Rate option: 25Hz\/50Hz\/150Hz\/250Hz\/500Hz\n    \u003cbr\u003e\n    RF Frequency: 2.4GHz\n    \u003cbr\u003e\n    Antenna: enameled copper wire 31mm length\n    \u003cbr\u003e\n    Telemetry output Power: \u0026lt;12dBm\n    \u003cbr\u003e\n    Default firmware version: ExpressLRS V3.0.1\n    \u003cbr\u003e\n    Firmware target: HappyModel EP 2400 RX\n    \u003cbr\u003e\n    Could update firmware via ExpressLRS configurator\n   \u003c\/td\u003e\n  \u003c\/tr\u003e\n \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\n So, don't just stand there! Grab the controller that's rewriting the rules and get ready to unleash the pilot within. This is Happymodel CrazyF405HD - your ticket to the skies.\n\u003c\/p\u003e\n\u003ch2\u003e\n Included\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  1x CrazyF405 Flight Controller\n \u003c\/li\u003e\n \u003cli\u003e\n  1x Accesories Kit (contents may vary based on supply)\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cblockquote\u003e\n \u003cp\u003e\n  For original factory 4.3.2 version firmware, if you want to use BMP280 barometer, please connect to betaflight configurator and then move to CLI command, then type the following command:\n \u003c\/p\u003e\n \u003cdiv\u003e\n  resource I2C_SCL 2 B10\n  \u003cbr\u003e\n  resource I2C_SDA 2 B11\n  \u003cbr\u003e\n  set baro_bustype = I2C\n  \u003cbr\u003e\n  set baro_i2c_device = 2\n \u003c\/div\u003e\n \u003cdiv\u003e\n  save\n \u003c\/div\u003e\n \u003cdiv\u003e\n \u003c\/div\u003e\n \u003cdiv\u003e\n  If you upgrade the firmware to 4.4.2 and want to use BMP280 barometer, please add BPM280 support to custom defines, following the procedure:\n \u003c\/div\u003e\n \u003cdiv\u003e\n  1. Enable expert mode on firmware flasher tab\n  \u003cbr\u003e\n  2. Add BARO_BMP280 to custom defines\n  \u003cbr\u003e\n  3. Flash the board\n  \u003cbr\u003e\n  4.Configure resources for external BARO device for the flight controller in CLl:\n \u003c\/div\u003e\n \u003cdiv\u003e\n \u003c\/div\u003e\n \u003cdiv\u003e\n  \u003cdiv\u003e\n   resource I2C_SCL 2 B10\n   \u003cbr\u003e\n   resource I2C_SDA 2 B11\n   \u003cbr\u003e\n   set baro_bustype = I2C\n   \u003cbr\u003e\n   set baro_i2c_device = 2\n  \u003c\/div\u003e\n  \u003cdiv\u003e\n   save\n  \u003c\/div\u003e\n \u003c\/div\u003e\n\u003c\/blockquote\u003e\n\u003cdiv\u003e\n\u003c\/div\u003e\n","brand":"HappyModel","offers":[{"title":"Default Title","offer_id":56578356117885,"sku":"HM-1H60023","price":40.64,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/Happymodel-CrazyF405-AIO-ELRS-FC-5.jpg?v=1753831953"},{"product_id":"hglrc-specter-f405-v2-flight-controller","title":"HGLRC Specter F405 V2 Flight Controller","description":"\u003cp\u003e\n Introducing the HGLRC SPECTER F405 V2 FC: The Brain Behind Your Drone's Brawn!\n\u003c\/p\u003e\n\u003cp\u003e\n Dive into the world of advanced drone technology with the HGLRC SPECTER F405 V2 FC, a flight controller that's not just smart; it's like the Einstein of the drone world, minus the wild hair. With its STM32F405 MCU brain, this piece of tech is so sharp it might just start asking existential questions.\n\u003c\/p\u003e\n\u003cp\u003e\n \u003cstrong\u003e\n  Core Features:\n \u003c\/strong\u003e\n\u003c\/p\u003e\n\u003cul\u003e\n \u003cli\u003e\n  \u003cstrong\u003e\n   Stability is Key:\n  \u003c\/strong\u003e\n  Equipped with the MPU6000 gyroscope, this flight controller is more stable than your yoga instructor on a good day.\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003cstrong\u003e\n   Speedy Gonzales:\n  \u003c\/strong\u003e\n  With an F405 chip at its core, this gadget boasts up to 4 serial ports, ensuring your drone is more responsive than a teenager on social media.\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003cstrong\u003e\n   Plug, Play, Soar:\n  \u003c\/strong\u003e\n  Say goodbye to soldering nightmares! Quickly connect cameras, receivers, and more with zero soldering drama.\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003cstrong\u003e\n   Power on Tap:\n  \u003c\/strong\u003e\n  With BEC 9V2A\/5V2.5A support, it's like having a mini power station on board, ensuring your drone's accessories are always juiced up.\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003cstrong\u003e\n   Golden Touch:\n  \u003c\/strong\u003e\n  Featuring an immersion gold design, this flight controller isn't just robust; it's like the Fort Knox of flight controllers, resistant to temperature and current.\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003cstrong\u003e\n   Memory Lane:\n  \u003c\/strong\u003e\n  A 16M black box records every twist and turn, because even drones like to reminisce.\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003cstrong\u003e\n   Data at Your Fingertips:\n  \u003c\/strong\u003e\n  An onboard galvanometer module lets you monitor current feedback in real time, because knowledge is power!\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\n Specifications\n\u003c\/h3\u003e\n\u003cul\u003e\n \u003cli\u003e\n  SPECTER F405 FC\n \u003c\/li\u003e\n \u003cli\u003e\n  MCU：STM32F405\n \u003c\/li\u003e\n \u003cli\u003e\n  GYRO：MPU6000\n \u003c\/li\u003e\n \u003cli\u003e\n  OSD：AT7456E\n \u003c\/li\u003e\n \u003cli\u003e\n  Blackbox：16MB\n \u003c\/li\u003e\n \u003cli\u003e\n  UART：4\n \u003c\/li\u003e\n \u003cli\u003e\n  BEC：9V2A\/5V2.5A\n \u003c\/li\u003e\n \u003cli\u003e\n  FC Firmware：HGLRCF405V2\n \u003c\/li\u003e\n \u003cli\u003e\n  Size：38mm*38mm\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n \u003cstrong\u003e\n  In the Box:\n \u003c\/strong\u003e\n\u003c\/p\u003e\n\u003cul\u003e\n \u003cli\u003e\n  HGLRC SPECTER F405 V2 Flight Controller\n \u003c\/li\u003e\n \u003cli\u003e\n  A sense of superiority knowing your drone has the best brain in the business\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n Upgrade your drone with the HGLRC SPECTER F405 V2 FC and experience flight control that's so smooth, you'll swear it's butter.\n\u003c\/p\u003e\n","brand":"HGLRC","offers":[{"title":"Default Title","offer_id":56578356314493,"sku":"HG-SPC-F405V2-FC","price":29.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/hglrc-specter-f460-stack-for-fpv-racing-drone-freestyle-506866_720x_9243f6e7-de3e-48e9-969b-8c1a1c4693e3.webp?v=1753831962"},{"product_id":"iflight-blitz-f745-flight-controller","title":"Iflight BLITZ F745 Flight Controller","description":"\u003cp\u003e\n Are you tired of fiddling with soldering irons and tangled wires every time you upgrade your quad? Say hello to the next-gen iFlight Blitz F745 Flight Controller, where sophistication meets simplicity, and the only thing that's 'high' is your drone - not your stress levels.\n\u003c\/p\u003e\n\u003cp\u003e\n \u003cstrong\u003e\n  Why It's Not Just Another Flight Controller:\n \u003c\/strong\u003e\n\u003c\/p\u003e\n\u003cul\u003e\n \u003cli\u003e\n  \u003cstrong\u003e\n   Improved Circuit Design:\n  \u003c\/strong\u003e\n  Because nobody likes a noisy neighbor, especially when it's your own quad buzzing with electrical noise.\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003cstrong\u003e\n   DJI HD VTX Connector:\n  \u003c\/strong\u003e\n  Plug-and-play because we're in 2024, not the Stone Age. Soldering? Please, that's so last decade.\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003cstrong\u003e\n   FC Indicator LEDs:\n  \u003c\/strong\u003e\n  It's like your quad is communicating with you through lights. \"All systems go\" or \"Houston, we have a problem\" - you'll know at a glance.\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003cstrong\u003e\n   Firmware Flexibility:\n  \u003c\/strong\u003e\n  Whether you're a Betaflight believer, an INAV enthusiast, or an Ardupilot aficionado, we've got you covered.\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n \u003cstrong\u003e\n  Spec-tacular Specifications:\n \u003c\/strong\u003e\n\u003c\/p\u003e\n\u003cul\u003e\n \u003cli\u003e\n  MCU: STM32F745\n \u003c\/li\u003e\n \u003cli\u003e\n  Gyro: ICM42688\n \u003c\/li\u003e\n \u003cli\u003e\n  Barometer: DPS310\n \u003c\/li\u003e\n \u003cli\u003e\n  OSD Chip: AT7456E\n \u003c\/li\u003e\n \u003cli\u003e\n  Flash: 32MB (Blackbox flash)\n \u003c\/li\u003e\n \u003cli\u003e\n  UARTS: 6\n \u003c\/li\u003e\n \u003cli\u003e\n  Smartaudio \/ IRC Tramp VTX protocol supported\n \u003c\/li\u003e\n \u003cli\u003e\n  LED controller: Yes\n \u003c\/li\u003e\n \u003cli\u003e\n  Beeper pad: Yes\n \u003c\/li\u003e\n \u003cli\u003e\n  Firmware target: IFLIGHT_BLITZ_F7_AIO\n \u003c\/li\u003e\n \u003cli\u003e\n  Mount pattern: 30.5*30.5mm\n \u003c\/li\u003e\n \u003cli\u003e\n  Dimensions: 36.5*35 mm\n \u003c\/li\u003e\n \u003cli\u003e\n  Weight: 7.8g\n \u003c\/li\u003e\n \u003cli\u003e\n  BEC: 5V 2.5A \/ 9V 2A\n \u003c\/li\u003e\n \u003cli\u003e\n  UART 1 for VTX HD \/ Analog\n \u003c\/li\u003e\n \u003cli\u003e\n  UART 2 for a Receiver\n \u003c\/li\u003e\n \u003cli\u003e\n  UART 3\/4\/5 for GPS or other sensors that require a serial port\n \u003c\/li\u003e\n \u003cli\u003e\n  UART 6 for ESC Telemetry\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n \u003cstrong\u003e\n  What's in the Box:\n \u003c\/strong\u003e\n\u003c\/p\u003e\n\u003cul\u003e\n \u003cli\u003e\n  1x Blitz F745 Flight Controller (Yes, the star of the show!)\n \u003c\/li\u003e\n \u003cli\u003e\n  1x Hardware Set (Because we wouldn't leave you hanging!)\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n So, if you want to make your quad fly like it's got a degree in aerodynamics, the iFlight Blitz F745 Flight Controller is your ticket to the big leagues. It's not just an upgrade; it's an evolution. Get yours and let your quad soar like it's got a PhD in Awesome!\n\u003c\/p\u003e\n","brand":"iFlight RC","offers":[{"title":"Default Title","offer_id":56578358083965,"sku":"BF15391","price":49.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/BLITZ-F745-F1_1024x1024_64ba4cff-32cd-4c7e-91bf-aadcb7b7fed4.webp?v=1753831975"},{"product_id":"iflight-blitz-f745-e55a-30x30-flight-stack","title":"iFlight Blitz F745 + E55A 30x30 Flight Stack","description":"\u003cp\u003e\n \u003cstrong\u003e\n  Unleash the Beast: BLITZ F745 E55 30x30 Stack by iFlight\n \u003c\/strong\u003e\n\u003c\/p\u003e\n\u003cp\u003e\n Tired of the same old drab drone stacks that promise the world but deliver a globe? Look no further! iFlight's BLITZ F745 E55 Stack is here to redefine your flight experience, infusing it with an electrifying blend of technology and sheer power that's as subtle as a sledgehammer at a tea party.\n\u003c\/p\u003e\n\u003cp\u003e\n \u003cstrong\u003e\n  Main Features:\n \u003c\/strong\u003e\n\u003c\/p\u003e\n\u003cul\u003e\n \u003cli\u003e\n  \u003cstrong\u003e\n   Flight Controller Extraordinaire:\n  \u003c\/strong\u003e\n  At the heart of this technological marvel is the Blitz F745 flight controller, a maestro conducting the symphony of your drone's components with the grace of a caffeinated ballerina. It's powered by an STM32F745 MCU, because, let's face it, using anything less would be like putting bicycle wheels on a sports car.\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003cstrong\u003e\n   Gyro \u0026amp; Barometer:\n  \u003c\/strong\u003e\n  With the ICM42688 gyro and DPS310 barometer, your drone will have more awareness of its surroundings than a cat in a room full of rocking chairs. Navigating the skies will be smoother than a pickpocket in a crowd.\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003cstrong\u003e\n   Seamless Connectivity:\n  \u003c\/strong\u003e\n  The DJI HD plug\u0026amp;play connector is the epitome of convenience, eliminating the need for soldering. It's like having a USB port in a world of floppy disks.\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003cstrong\u003e\n   Noise Reduction:\n  \u003c\/strong\u003e\n  Quality components that cut down on noise? Yes, please. Because the only thing we want to hear is the sound of awe from onlookers, not electrical buzz.\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n \u003cstrong\u003e\n  ESC Details:\n \u003c\/strong\u003e\n\u003c\/p\u003e\n\u003cul\u003e\n \u003cli\u003e\n  \u003cstrong\u003e\n   Power Handling:\n  \u003c\/strong\u003e\n  The E55 4in1 ESC doesn't just handle power; it tames it. With a constant of 55 Amps and a burst of 60, it's like having a pet dragon under the hood - all the fire, none of the risk.\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003cstrong\u003e\n   Compatibility:\n  \u003c\/strong\u003e\n  Supports a buffet of protocols including DShot150\/300\/600 and MultiShot. It's like being fluent in every language at the United Nations of Drones.\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n Specifications\n\u003c\/h2\u003e\n\u003ch3\u003e\n FC\n\u003c\/h3\u003e\n\u003cdiv class=\"col-md-6 caracteristique-hidden\"\u003e\n \u003cul\u003e\n  \u003cli\u003e\n   MCU: STM32F745\n  \u003c\/li\u003e\n  \u003cli\u003e\n   Gyro: ICM42688\n  \u003c\/li\u003e\n  \u003cli\u003e\n   Barometer: DPS310\n  \u003c\/li\u003e\n  \u003cli\u003e\n   OSD Chip: AT7456E\n  \u003c\/li\u003e\n  \u003cli\u003e\n   Flash: 32MB (Blackbox flash)\n  \u003c\/li\u003e\n  \u003cli\u003e\n   UARTS: 6\n  \u003c\/li\u003e\n  \u003cli\u003e\n   Smartaudio \/ IRC Tramp VTX protocol supported\n  \u003c\/li\u003e\n  \u003cli\u003e\n   LED controller: Yes\n  \u003c\/li\u003e\n  \u003cli\u003e\n   Beeper pad: Yes\n  \u003c\/li\u003e\n  \u003cli\u003e\n   Firmware target: IFLIGHT_BLITZ_F7_AIO\n  \u003c\/li\u003e\n  \u003cli\u003e\n   Mount pattern: 30.5*30.5mm\n  \u003c\/li\u003e\n  \u003cli\u003e\n   Dimensions: 36.5*35 mm\n  \u003c\/li\u003e\n  \u003cli\u003e\n   Weight: 7.8g\n  \u003c\/li\u003e\n  \u003cli\u003e\n   BEC: 5V 2.5A \/ 9V 2A\n  \u003c\/li\u003e\n  \u003cli\u003e\n   UART 1 for VTX HD \/ Analog\n  \u003c\/li\u003e\n  \u003cli\u003e\n   UART 2 for a Receiver\n  \u003c\/li\u003e\n  \u003cli\u003e\n   UART 3\/4\/5 for GPS or other sensors that require a serial port\n  \u003c\/li\u003e\n  \u003cli\u003e\n   UART 6 for ESC Telemet\n  \u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-md-6 caracteristique-hidden\"\u003e\n \u003ch3\u003e\n  ESC\n \u003c\/h3\u003e\n \u003cul\u003e\n  \u003cli\u003e\n   Mounting Holes: 30.5*30.5mm\/Φ4mm\n  \u003c\/li\u003e\n  \u003cli\u003e\n   Weight: 15.3g\n  \u003c\/li\u003e\n  \u003cli\u003e\n   Supports 2-6S Lipo input\n  \u003c\/li\u003e\n  \u003cli\u003e\n   MCU： G071\n  \u003c\/li\u003e\n  \u003cli\u003e\n   Constant: 55 Amps\n  \u003c\/li\u003e\n  \u003cli\u003e\n   Burst: 60 Amps\n  \u003c\/li\u003e\n  \u003cli\u003e\n   Current sensor: Yes\n  \u003c\/li\u003e\n  \u003cli\u003e\n   BEC: No\n  \u003c\/li\u003e\n  \u003cli\u003e\n   Current rate: 200\n  \u003c\/li\u003e\n  \u003cli\u003e\n   Supports: DShot DShot150\/300\/600\/MultiShot\/ OneShot etc.\n  \u003c\/li\u003e\n  \u003cli\u003e\n   Target : IFLIGHT_BILTZ_G3 32.9\n  \u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cp\u003e\n \u003cstrong\u003e\n  What's in the Box:\n \u003c\/strong\u003e\n\u003c\/p\u003e\n\u003cul\u003e\n \u003cli\u003e\n  1x BLITZ F745 Flight Controller: The brain that's more Einstein than Frankenstein.\n \u003c\/li\u003e\n \u003cli\u003e\n  1x BLITZ E55 4in1 2-6S ESC: The brawn that flexes without even trying.\n \u003c\/li\u003e\n \u003cli\u003e\n  1x Set of Dampers: Because your stack deserves a throne.\n \u003c\/li\u003e\n \u003cli\u003e\n  1x Set of Wires for FC: The essential arteries for your flying masterpiece.\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n Whether you're a seasoned pilot or a newbie with lofty ambitions, the BLITZ F745 E55 Stack by iFlight is your ticket to an elevated flying experience. Because flying a drone shouldn't just be about getting from point A to B; it should be an epic tale of power, precision, and a little bit of showing off.\n\u003c\/p\u003e\n","brand":"iFlight RC","offers":[{"title":"Default Title","offer_id":56578359689597,"sku":"BF15684","price":98.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/blitz-f745-e55-30x30-stack-by-iflight.png?v=1753831989"},{"product_id":"hglrc-specter-f411-12a-aio-flight-controller-elrs-vtx","title":"HGLRC Specter F411 12A AIO Flight Controller (ELRS+VTX)","description":"\u003cp\u003e\n \u003cstrong\u003e\n  Revolutionize Your Drone Experience with Advanced Integration\n \u003c\/strong\u003e\n\u003c\/p\u003e\n\u003cp\u003e\n The HGLRC SPECTER F411 12A AIO is not just another flight controller; it's a game-changer for the FPV community. This all-in-one marvel brings together top-tier features that cater specifically to those who thrive on precision and performance.\n\u003c\/p\u003e\n\u003ch3\u003e\n Key Features:\n\u003c\/h3\u003e\n\u003cul\u003e\n \u003cli\u003e\n  \u003cstrong\u003e\n   High-Performance MCU \u0026amp; MPU\n  \u003c\/strong\u003e\n  : At the heart of this beast lies the STM32F411 microcontroller and ICM42688P motion processor, ensuring rapid processing and stable flight dynamics.\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003cstrong\u003e\n   Robust Built-in Receiver\n  \u003c\/strong\u003e\n  : Say goodbye to external receiver woes thanks to the integrated UART ExpressLRS 2.4G receiver. Enjoy enhanced stability and extended signal range, making lost connections a thing of the past.\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003cstrong\u003e\n   Superior Image Transmission\n  \u003c\/strong\u003e\n  : Equipped with an adjustable 400mW 5.8GHz RCE-25-100-400mW analog transmitter, this controller ensures that you can navigate even the most challenging environments without a hitch.\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003cstrong\u003e\n   Expansive Firmware Compatibility\n  \u003c\/strong\u003e\n  : Ships with BLS firmware, yet flexible enough to switch to Bluebird firmware for those who like to tinker.\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\n Enhanced Connectivity and Power:\n\u003c\/h3\u003e\n\u003cul\u003e\n \u003cli\u003e\n  \u003cstrong\u003e\n   Versatile Battery Compatibility\n  \u003c\/strong\u003e\n  : Powers through with support for 2S to 4S batteries, ensuring flexibility across different drone setups, from 75mm whoops to 3-inch toothpick drones.\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003cstrong\u003e\n   Continuous \u0026amp; Peak Currents\n  \u003c\/strong\u003e\n  : Features a robust 12A continuous and 15A peak current, giving you the muscle when you need it most.\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003cstrong\u003e\n   Comprehensive Onboard Support\n  \u003c\/strong\u003e\n  : Includes a 5V1.5A BEC, 16MB black box for data logging, OSD, LED, and buzzer support, enhancing both functionality and troubleshooting capabilities.\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\n Design and Durability:\n\u003c\/h3\u003e\n\u003cul\u003e\n \u003cli\u003e\n  \u003cstrong\u003e\n   Compact and Lightweight\n  \u003c\/strong\u003e\n  : A mere 5.6 grams and dimensions of 32x32mm, paired with a 25.5x25.5mm mounting hole pattern, make installation a breeze without adding bulk.\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003cstrong\u003e\n   Firmware and Protocol Ready\n  \u003c\/strong\u003e\n  : Utilizes Dshot150\/300\/600 for swift and reliable ESC communication, ensuring your drone reacts as fast as you do.\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n Specifications\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Product name:HGLRC F411 12A AlO Flight controller\n \u003c\/li\u003e\n \u003cli\u003e\n  MCU:STM32F411\n \u003c\/li\u003e\n \u003cli\u003e\n  MPU:ICM42688P\n \u003c\/li\u003e\n \u003cli\u003e\n  BEC:5V1.5A\n \u003c\/li\u003e\n \u003cli\u003e\n  Black box:16MB\n \u003c\/li\u003e\n \u003cli\u003e\n  OSD:support\n \u003c\/li\u003e\n \u003cli\u003e\n  LED:support\n \u003c\/li\u003e\n \u003cli\u003e\n  Buzzer:support\n \u003c\/li\u003e\n \u003cli\u003e\n  UARTS:\n  \u003cul\u003e\n   \u003cli\u003e\n    image transmission OSD assistant\n   \u003c\/li\u003e\n   \u003cli\u003e\n    CRSF protocol receiver\n   \u003c\/li\u003e\n  \u003c\/ul\u003e\n \u003c\/li\u003e\n \u003cli\u003e\n  Built-in receiver:UART ExpressLRS 2.4G\n \u003c\/li\u003e\n \u003cli\u003e\n  Built-in receiver frequency:2.4GHZ\n \u003c\/li\u003e\n \u003cli\u003e\n  Built-in image transmission:RCE-25-100-400mW (adjustable)\n \u003c\/li\u003e\n \u003cli\u003e\n  Built-in image transmission frequency:48CH-5.8ghz\n \u003c\/li\u003e\n \u003cli\u003e\n  Continuous current: 12A\n \u003c\/li\u003e\n \u003cli\u003e\n  Peak current: 15A(5s)\n \u003c\/li\u003e\n \u003cli\u003e\n  ESC protocol:Dshot150\/300\/600\n \u003c\/li\u003e\n \u003cli\u003e\n  Flight control firmware:HGLRCF4115X1280_15A\n \u003c\/li\u003e\n \u003cli\u003e\n  ESC firmware:Z-H-30 (Blheli_S)\n \u003c\/li\u003e\n \u003cli\u003e\n  Input voltage: 25-45 (Lipo)\n \u003c\/li\u003e\n \u003cli\u003e\n  Size: 32x32mm\n \u003c\/li\u003e\n \u003cli\u003e\n  Mounting hole: 25.5X25.5mm.M2\n \u003c\/li\u003e\n \u003cli\u003e\n  Weight:5.6g\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n In the Box:\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  HGLRC SPECTER F411 12A AIO Flight Controller\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\n Perfect for Indoor and Outdoor Flights\n\u003c\/h4\u003e\n\u003cp\u003e\n Whether navigating the nooks and crannies of your basement or soaring outdoors, this flight controller is engineered to keep you in control with a high refresh rate, low latency, and unmatched sensitivity.\n\u003c\/p\u003e\n\u003cp\u003e\n Transform your flying experience with the HGLRC SPECTER F411 12A AIO - because your drone deserves the best of technology wrapped in a tiny, potent package. Fly further, faster, and with more fun than ever before!\n\u003c\/p\u003e\n\u003cp\u003e\n \u003cimg class=\"alignnone size-medium\" height=\"13211\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/HGLRC-F411-12A-AIO.webp?v=1754234049\" width=\"1200\"\u003e\n\u003c\/p\u003e\n","brand":"HGLRC","offers":[{"title":"Default Title","offer_id":56578366079357,"sku":"HG-SPK411-12A","price":65.94,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/hglrc-specter-f411-12a-aio-701606.webp?v=1753832014"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/collections\/FC_Autopilot.png?v=1754160898","url":"https:\/\/www.unmannedtechshop.co.uk\/collections\/autopilots-flight-controllers.oembed?page=13","provider":"Unmanned Tech","version":"1.0","type":"link"}