Not the cheapest?

Let us know, we will try to beat it!

Coupons PRICE MATCH

⚠️Check Before Soldering

If you need to solder or make any modifications to your item please test the item first. Modification or problematic soldering can cause damage not covered under warranty.

Share This Item:

Airbot F7 Flight Controller

£29.95 (ex VAT £24.96)

Out of stock
Restock in 2+ Weeks

Want to be notified when this product is back in stock?

SKU: 8C4-930-A78 Categories: , Brand:

The Airbot F7 is a single sided board to make mounting this FC into slammed frames mich easier.  Apart from this it still packs all the features you expect from a F7 betaflight FC including a 6 UARTS, ICM gyro, camera control and 128Mb blackbox.

Airbot F7 Flight Controller

£29.95 (ex VAT £24.96)

Out of stock
Restock in 2+ Weeks

Want to be notified when this product is back in stock?

The Airbot F7 is a single sided board to make mounting this FC into slammed frames mich easier.  Apart from this it still packs all the features you expect from a F7 betaflight FC including a 6 UARTS, ICM gyro, camera control and 128Mb blackbox.

Not the cheapest?

We will try to beat it!

⚠️Always test your item before soldering, issues caused by soldering aren't covered by warranty.

SKU: 8C4-930-A78 Categories: , Brand:

The Airbot F7 flight controller uses the ICM20602 over SPI for ultimate flight performance. Also onboard is an AB7456 OSD chip for fully integrated BetaFlight OSD support. Other features of the Airbot F7 include: 3-6S direct LiPo input, 6x hardware UARTs, 1x external I2C, 1x external SPI, camera control, onboard flash, a micro RX connector, a 4-in-1 ESC connector, and a low profile for easy installs.

Key Features

  • STM32 F722 MCU, Runs Betaflight firmware
  • ICM Gyro Over SPI Bus
  • 30.5*30.5 mm Mounting holes
  • Supports Lipo direct plugin (3-6S)
  • Supports 5V 2A BEC output (Buck)
  • STM32 controls OSD chip over SPI in DMA mode (Betaflight OSD)
  • More UARTs (6xUARTs)
  • Supports camera control function
  • Supports ext. Gyro box
  • Onboard 128Mbit(16MB) flash for balckbox

Specifications

  • Brand Name: Airbot
  • Item Name: F7 Flight Controller AIO OSD BEC
  • MCU: STM32F722
  • Input Voltage: 3-6S Lipo
  • Betaflight OSD
  • BEC: 5V @ 2A
  • Size: 36x36mm
  • Mounting Hole: 30.5×30.5mm

Kit Contents

  • 1x Airbot F7 Flight Controller

Airbot F7 Pinout

Airbot f7 pinout

Airbot F7 Resources Table

Function Solder Pad
Silk Screen
Resources MCU Pin Notes
SBUS SB RX 1 PA10
DSM2 TX1 TX 1 PA9 CLI: serialrx_halfduplex set to ON
Smart Audio VTX S/A TX 5 PC12
Smartport S.P TX 4 PA0
ESC Telemetry TLM TX 2 PA2 CLI: set esc_sensor_halfduplex = ON
Camera Control CC PA8
SDA SDA I2C1_SDA PB9 Ext. Pull up needed
SCL SCL I2C1_SCL PB8
GPS RX6/TX6 UART 6 PC6/7
WS2812B LED LED PA15
Buzzer  Bz-/Bz+  PB0

Zadig Drivers

If you have problems connecting to the board, or uploading new firmware the best fix is to use the zadig driver tool.

  • Push BOOT button on the flight controller.
  • Plug-in the USB cable (the red LED should not be as bright as normally).
  • Fire up Zadig and hit “Options” and then “List All Devices”.
  • From the list choose “STM32 BOOTLOADER”.
  • Under “Driver” choose “WinUSB” on the right and hit “Reinstall Driver”.

For more information check out our zadig driver tool tutorial

Weight 50 g

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Share this item on:

Product Meta Information:

SKU: 8C4-930-A78 Categories: , Brand:

The Airbot F7 flight controller uses the ICM20602 over SPI for ultimate flight performance. Also onboard is an AB7456 OSD chip for fully integrated BetaFlight OSD support. Other features of the Airbot F7 include: 3-6S direct LiPo input, 6x hardware UARTs, 1x external I2C, 1x external SPI, camera control, onboard flash, a micro RX connector, a 4-in-1 ESC connector, and a low profile for easy installs.

Key Features

  • STM32 F722 MCU, Runs Betaflight firmware
  • ICM Gyro Over SPI Bus
  • 30.5*30.5 mm Mounting holes
  • Supports Lipo direct plugin (3-6S)
  • Supports 5V 2A BEC output (Buck)
  • STM32 controls OSD chip over SPI in DMA mode (Betaflight OSD)
  • More UARTs (6xUARTs)
  • Supports camera control function
  • Supports ext. Gyro box
  • Onboard 128Mbit(16MB) flash for balckbox

Specifications

  • Brand Name: Airbot
  • Item Name: F7 Flight Controller AIO OSD BEC
  • MCU: STM32F722
  • Input Voltage: 3-6S Lipo
  • Betaflight OSD
  • BEC: 5V @ 2A
  • Size: 36x36mm
  • Mounting Hole: 30.5×30.5mm

Kit Contents

  • 1x Airbot F7 Flight Controller

Airbot F7 Pinout

Airbot f7 pinout

Airbot F7 Resources Table

Function Solder Pad
Silk Screen
Resources MCU Pin Notes
SBUS SB RX 1 PA10
DSM2 TX1 TX 1 PA9 CLI: serialrx_halfduplex set to ON
Smart Audio VTX S/A TX 5 PC12
Smartport S.P TX 4 PA0
ESC Telemetry TLM TX 2 PA2 CLI: set esc_sensor_halfduplex = ON
Camera Control CC PA8
SDA SDA I2C1_SDA PB9 Ext. Pull up needed
SCL SCL I2C1_SCL PB8
GPS RX6/TX6 UART 6 PC6/7
WS2812B LED LED PA15
Buzzer  Bz-/Bz+  PB0

Zadig Drivers

If you have problems connecting to the board, or uploading new firmware the best fix is to use the zadig driver tool.

  • Push BOOT button on the flight controller.
  • Plug-in the USB cable (the red LED should not be as bright as normally).
  • Fire up Zadig and hit “Options” and then “List All Devices”.
  • From the list choose “STM32 BOOTLOADER”.
  • Under “Driver” choose “WinUSB” on the right and hit “Reinstall Driver”.

For more information check out our zadig driver tool tutorial

Weight 50 g

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Airbot F7 Flight Controller

Out of stock
Restock in 2+ Weeks